Leaderboard

PUBS ARE OPEN funny...

Hate to tell you this mate but you forgot to put the front end back on before you took the picture ? ?

Second MWS has arrived! Man... I never get tired of unboxing these things. And the brilliant finish they come with from the factory. I rattle canned my first MWS, so think this one will stay pristine. I have a civilian style build in mind for this one with a 13.5 M-LOK rail.

But not all countries have to deal with political dissidents though.

Finally got my pistol assembled and mounted the scope to my g3 G3 is a lct g3a4 firing 435 fps and mechanically locked to semi with a warfet and maple leaf hop rubber. Scope is a hensoldt 4x24 s2 with aftermarket illuminator. Glock is a tm glock 18c with detonator cobra slide kit (absolute MF to install) detonator tti sights (required modifications to the slide for some stupid reason), gaurder extended slide and mag releases, gaurder lightweight bbu and ml crazyjet barrel and hop. Both are almost finished but not quite, waiting on a tti magwell and new trigger for the glock and a llm1 and harris bipod for the g3.

For an gnu that rare, with that perfect Halford's Own paintjob, and, unless God allows my eyes to be deceived, set of wondrous extras; the chap obviously states collection only. I can only hope that Securicor or Group 4 are insured well enough to carry such an article. There's fuck all chance of anyone driving halfway across the country for it, that's for sure.

Finished this today

had guns out as was meant to eb at a game yesterday but couldnt make it so heres a pic of my babies *ignore the scope on the m4*

KWA QRF Mod3 base - SIG Muzzle Brake - Midwest Industries 4.5" Rail - Replica Scalarworks BUIS - LWRC Inc Compact Stock - PTS MOE MVG and Pistol Grip Inside: - Gate Titan Advanced - Updated VPS system

Hi! Yes as of this time, I have not come across a holistically good bucking that can outperform AND outlast the original TM bucking. You’re right on there, in a GBB your dealing with expanding volumes, temperature and pressure changes. In an AEG, as long as that motor pulls your stored energy (spring) back you’re getting a repeatable output.

Exactly. You’d think a 285 FPS 0.3 bb would them churn out the equivalent 0.20 bb at 350fps but my tests clearly showed that was not happening. With an AEG definitely the relationship would be almost linear as you said in your post. GBBRs are not an exact science. They are just fun to use. Here is a thought. It could well be the quality of the 0.2bbs they were Excels and pretty old too. Dare I say it about 6-7 yrs old maybe more. I do have some newer 0.2s so I’ll give them a go at the weekend and see what transpires.

Let's see how these badgers perform. Titan 7.4v with a new charging bag (smaller than I thought!) and a free patch from Platoon

These spam bots are getting smarter... The latest was even going to come to the forum meet-up!

that's because they're not doing it right......

can confirm, nearly lost a sig mag learning that one. heel release is another reason the makarov is the best pistol

No just ironic humour sorry I wasted it on you . ?

it's a joke about how short the barrel is....

Yes power tuning is all in the floating valve for the most part, the rest is efficiency/air tightness

Apparently no one on Facebook has any imagination so I thought I'd ask here. I'm working on a custom AEG using a mix of printed parts and bits I've got lying around but I can't decide on a look. Anyone got any inspiration? I want to build something totally unique and sci fi.

Enjoyed the loadout video. I've just spunked on a load of new viper stuff so I can have an rig for sniping, one for the MTW (dressed as a bush) and another for CQB and none bush days!

Lol, i was too busy microanalysing the price to see it was collection only......

"What length barrel does it have?" "Yes"

I think I'm finally done with my VFC SCAR-H. Parts: https://docs.google.com/spreadsheets/d/12v6YkUH44YzoyB8OpJLW5I2xgpuF0jbp0GJial5D-7Y/edit?usp=sharing I'm probably going to remove the flashlight, is there a smaller/lower profile one I could use? it's too chunky.

480mm

Interesting, I just chrono’d a customer CQBR, 250mm 6.03, Modify tan, Super Nub, HSB, stock valve, otherwise stock, freshly serviced ? With Abbey Vertex @ similar temperature; 360 FPS

Today was my designated tinkering day with the MWS before my first post-lockdown game next Sunday at Spartan Woodland, Bristol. I have set the MWS up with all stock bolt, nozzle and valve (NOTE: I have taken 0.15mm off the back of the valve to up the output to about 10fps). Running 0.30g BBs through a CrazyJet 250mm barrel, Modify tan bucking and Laylax hop arm. The shed was a balmy 13degC (or there abouts) and the mags and gas were all at ambient temperature. I gave each mag a 5sec fill, in bursts of 1s and then left for 5mins to let the temp settle. Each gas was given 5 shots over the chrono, with 1s gaps. I often finished up with some full auto to check on cool-down. ***All FPS given as 0.20g BB equivalents*** Nuprol WHITE = 330fps. Still very snappy shooting and not much cool down after 20rd full auto! Nuprol GREEN = 340fps. Benchmark for regular "green" gas. Does cool down a bit. Nuprol RED = 395fps. Eek, well over the limit so I would keep for days when the temps are in single digits. Abbey Vertex Predator = 341fps. Apparently a "powerful gas for heavy weapons" - or just another green gas in an orange can ASG Ultrair = 340fps. Pretty much the same as any other green gas, but Patrolbase have a "Two for £10" offer so I have 8 cans of the damn stuff! Interesting that the difference in Nuprol WHITE and GREEN is only 10fps. I purchased that can for an old TM MP7 I had that (with a tight bore barrel) was WAAAAY too hot to use. That dropped the fps by 20-30 IIRC. Maybe the MWS is just a very efficient system? I checked the accuracy and zeroed the Visionking LPVO scope. 34mm group at 12m bench rested. Should be ok for hitting man sized target at 20-50m.

Update to the KWA DD M4v7 - - Slim motor (US import from Tactical Parts) - Replica slim DD pistol grip

Hi, ALL! ? This weeks video is about the Mag War, which side are you on? ?? Doing the best with what I have, enjoy it for what it is. ??? ?GAMBLE?

Hi @Steveocee! ? Run fit people....” ? Had your first game of 2021! ??? My first is next week! ?? Can’t wait, got a few ideas for my first game to try out.... ? ?GAMBLE

Thought I would try the Hammerite faux soviet 50s era onward AK metal finish that been doing the rounds on social media on my E&L AKS-74. Also a side by shot of Hammerite finish ( that the one that has bakelite mag) and the standard E&L blued finish on an AKM.

Now THAT is a perdy gun !? And you know with my twisted sense of humour I’d do it ! ?

The PSG1 finally arrived, Bloody hell its heavy haha

Finally sorted out my A&K LR300 Good deal from Titano Store for £165 but needed some tlc to get it working well. (Was shooting 260fps way right and some of the screws were completely wrong type) M100 spring, Maple leaf macaron, reshim including motor height set on half shell, bearing guide and now shoots 320 dead straight ?

A celebratory and excited return to Airsoft so thought I'd share some of my non-shooty kit. Yes there is a slight inspiration from our very own @GAMBLE here as he's covered some loadout videos recently but imitation is genuinely one of the highest forms of flattery ?

Can I put forward the whole of the Patrol Base boneyard?

Latest build state. Really liking the AngryGun BCM front end and Surefire Blast Warden. Next buys are BCM Gunfighter Mod 3 grip and a foregrip.

I lost a very hard to find KSC M93R mag the same way.

They are absolute shit lol. I have had loads of AG parts, all but one of them have problems..they clearly test nothing! There is no other explanation for it. Ag nozzle, weird full auto so removed. Ag bolt (sf version) piston wouldn't fit, also spring retainer wouldn't go in without modding. Ag outer barrel, hop issues when installed Ag maritime bolt catch, sticks out about 3mm more than a real one, so you cannot wind the mag release enough to seat it properly. They even admitted to me they screwed it up! Ag mag release, fell in half first use lol..pin just fell out! Ag charging handle, roll pins just fall out Ag lightweight bolt catch, needed heavy filing to move freely. Ag urgi v2 rail, will not fit an mws without their adapter ring which only comes with their outer barrel set which causes hop problems! The v1 rail was fine and had a more durable finish. Saying that, my flash hider is perfectly fine, even they would struggle to fuck that up. They clearly make things based on pictures on the Internet, this is why everything is out of spec..then they clearly do not test finished products on a base mws but on modified ones made from their parts. I hope they go out of business.