Leaderboard

When my hospital changed trusts we all had to have new ID badges so when they arrived there was a bag full of the new badges and a bag full of those extendable wire keychains , but unfortunately due to my age and rapidly advancing dementia I complete forgot I’d already picked one up and grabbed a few more ! ??

The topic of ‘Fees’ rears it’s ugly little heads quite regularly and in the end it always ends up the same way , you’ve got one side that says you should have one single figure that you ask for that covers everything and on the other you’ve got the ones who go in to very long winded reasons for why you have the goods price and then P&P plus PayPal is tagged on after . One of the biggest reasons they Say this seems to be letting the buyer choose the delivery method instead of setting it them selves wether by parcelfarce/ Royal fail or Hermies/etc me I just do Royal Mail/Parcelfarce as my preference for who I’ll send via and that’s that you want anything else ? Sorry no can do .

Also, those key holder reels are great- hook one onto the pin and if you set it up right you can pull the pin by extending your arm so you can throw it one handed.

Both the gun and suppressor are out of stock from the suppliers I can find and would trust so I'll take the cheapest price I can find from a reputable retailer even if out of stock. ASG MP9 - £199.99 ASG M9 Suppressor - £54.99 Both prices pulled from PatrolBase. 254.98 combined price brand new, applying a 60-70% of retail second hand value we get £152.99 - £178.49 second hand value. That is assuming the gun only has normal wear and tear damage. However the gun is damaged beyond that as the sling point is completely sheared off. And to top it off, the asking price of £180 is for collection/if you live within reasonable driving distance of him else he wants postage and PayPal fee's on top. (Paypal ToS state the seller is to take the cost of the paypal fee's and not charge to the customer) Since the item is damage beyond normal wear and tear I'd go with 60% total retail value and sell it for £152.99 for collection and £170 odd for postage including paypal fees (I've can't remember how much it'd cost to post something of that size but I'm thinking around £14-£16? Correct me if I'm wrong) I rest my case, your honour.

That’ll teach you not to be welsh ours are free ! ??????? ??? Or as we called it in the army ‘shinny mine hunting’ as in “haven’t a clue what it is/who’s it is but its shinny and it’s sat there all unclaimed so it’s mine now !” ??

Gone down for me ..... my doctor doubled the quantity on my prescription, which turned it into half price I also suffer from free shit syndrome, and find my pockets stuffed full of freebies

First bits from Russia arrived, absolutely in love with the design on the sling mount.

Thats why prescription charges have just gorn up. Lol ?

oh that wont be getting touchd bud gonna start from fresh and do a complete build

I know im being pedantic however if there was buyers fees for sellers would those be passed on? I don't have a problem paying for something that i think is worth the money but just list the complete price. Its easy and im sure people that sell doing that tend to have quicker sales.

the question is why should the buyer pay selling fees? They are selling so surely the seller should cover them?

Its not an argument i really understand. Just work out the fee's and postage before you list it and add it onto the total price. I mean your almost always tanking a massive depreciation loss when selling secondhand gear anyway.

Check out Octagon Airsoft for the Narcos AAP01 CNC Aluminum 6061 Front Barrel Kits.

Thanks.......can see me dropping near 500 on there soon ?

Not as impressive as all your custom rigs and holsters but here's mine. My partner goes through hairbands like you wouldn't believe so I took a couple of the stretched out ones and used them to secure my grenades to my belt. The spoon goes through the molle and the hairband goes over the top and hooks on the pin. They're nice and secure now and, with a bit of practice, just as fast to unhook. VID_20200824_222113.mp4

PUBS ARE OPEN funny...

Finally got my pistol assembled and mounted the scope to my g3 G3 is a lct g3a4 firing 435 fps and mechanically locked to semi with a warfet and maple leaf hop rubber. Scope is a hensoldt 4x24 s2 with aftermarket illuminator. Glock is a tm glock 18c with detonator cobra slide kit (absolute MF to install) detonator tti sights (required modifications to the slide for some stupid reason), gaurder extended slide and mag releases, gaurder lightweight bbu and ml crazyjet barrel and hop. Both are almost finished but not quite, waiting on a tti magwell and new trigger for the glock and a llm1 and harris bipod for the g3.

Similar event for me , got one of the briefcase sized divided boxes to put all my hundreds of dremel bits’n’bobs in spent a good few hrs transferring from half a dozen different packs and kits and what not so there all neatly sectioned off by use and then couple o wks ago I decided to balance it in the corner of the breakfast bar while I did a piddly little job and promptly knocked it off and there’s Dremel shit everywhere ! So yes I am a knobhead ! ?‍♂️

Finished this today

I would check on the customs fee and VAT thing, it is your property being moved between countries for your own use. No different to taking a suitcase of clothes on holiday with you I would see about using a shipping firm (as used to move peoples belongings when emigrating) rather than a commercial courier who seem to slap spurious charges on everything and have awful customer service!

The PSG1 finally arrived, Bloody hell its heavy haha

It has a Titan advanced and 7 EPM mags and a M95. What baffles me is running a Titan with stock Marui gears. Although nothing wrong with that combo if you’re installing a Titan you may as well shove in steel gears and bushes too. And by changing the spring you have the piston out so why not change it for a more durable one. Anyway this isn’t a topic about upgrades. But £975? Jeez! And for all the youngsters this song is epic.

My Strike Industries build so far. Decided not to sell the real steel parts after all as I am working towards my license for real practicing with real firearms. So I decided to buy a new MWS to fit it all too. As soon as they are back in stock however I will be buying another MWS to make a Block II FSP build (the one I was going to do instead of this ). So here it is, my "Strike Rifle", not finished yet but for the most part it is to my liking. Only upgrades I'm definitely going to do is get an SI Forward Assist, an SI buffertube and the SI Fang triggerguard and perhaps a set of real magpul pro mbus'.

My boneyard MWS I refurbished. thing is nutty! paint: rustoleum machine gray high performance enamel

Raptor mp443 grach. Pros Beautiful look and feel cons It dosent work. It dry fires but vents gas as soon as it has bbs in it. the trigger is so hard to pull it has actually strained the muscles in my wrist from trying to test fire it. On closer inspection the trigger is too long and catches on the bottom of the trigger guard. The mags springs arent strong enough to move the slide catch to lock back. so yeah not best pleased with it. and all this after waiting for a month and a half for british customs to sort it out.

Not TG but don't you hate it when you specifically choose an alternate shipper to UPS and then they go and use them anyway!!! Well I won;t expect that order any time soon.