Leaderboard

Prison's are designed to be able to be secure with a few guards as possible, they intentionally employ choke points, funnelling designs and are essentially inverse castles (designed to keep people in versus keep people out). I just don't think this is a good site for a large number of people. I think for prisons you need to design the event around the site. It needs to be asymmetric in terms of teams a few people as the guards who can lock down buildings etc and the rest as inmates trying to escape. That or you need to have far fewer players so they can't just lock everything down. My vote with 400 players on site is clusterfuck.

Yep, don't think they pay to go to uni either ?, amongst other freebies ?

Holy bot necro Batman.

What it says and the reality, is going to be very very different. That to me looks like just the total boundaries. The drops from the green sides into the moat looks around 2 stories. Sunset October is around 7pm. So that's unlikely to be usable. The chunk to the right is going to be parking and camping. You remove the open grass areas, which well are gonna be just that. Leaves you with about 20 very easy to lock down controlled buildings, that are designed to funnel people. Oh and a single bridge across of the bottom left part of the site is going to be so easy to lock down. For the first 20-30 or so people who get over it. No idea how accessible the higher ground is from the moat. So that might change things but this is going to feel a heck of a lot smaller with 200 people shooting you with hicaps. We went to the Gloucester prison and locked down that site with about 50 per site. I mean we have locked down woodlands sites with not many more. That site with 150 would be pretty epic but 400 from my experience of large games, its just going to be a cluster fuck of camping and ammo spamming. That after the first 20mins of any story will fall apart in to a skirmish. Maybe if they limit it to 400 rounds but that they have stated its not going to be milsim. Perhaps I am just jaded but large games usually tend to be pretty terrible mess after a couple of hours of marshalls trying to herd cats. Giving up, just standing back and lobbing the odd pyro for effect.

That’ll teach you not to be welsh ours are free ! ??????? ??? Or as we called it in the army ‘shinny mine hunting’ as in “haven’t a clue what it is/who’s it is but its shinny and it’s sat there all unclaimed so it’s mine now !” ??

Hi, ALL! ? Another BDU unlocked in my collection, can’t wait to test it out, German! ? Will be in my video this Sunday! ? Close to completing my BDU camo collection.... got to draw the line somewhere.... until something else comes along!? ??? ?GAMBLE?

Thats like the 38 special snub nose brocock that I used to have. ☹

Well theres lovely boyo ?? Good system Regards

I got this one in chrome and it's pretty good. https://www.bespokeairsoft.co.uk/airsoft-gun/revolver/hfc-co2-revolver-2-5inch-full-metal-black I got make some ratshot shells so drops FPS under 350 like a shotgun

Yup all prescriptions are free , Uni isn’t quite free but it’s a very minimal contribution if your a welsh citizen and your going to a welsh uni . ???????

Coo. Lucky buggers lol Regards

Really??

@PewPewLoki Interesting find. I believed that the leak was from the middle of the mag where the two halves meet. That was at least how I got one leak free - simply by merging them with steel epoxy. Anyway, good to know that the valve is 1911 spec for Easy replacement. The question is however, did they become leak free after you changed out the valve? Also, could you clarify what o-ring it is that have created the maracas, and where it sits on the valve? I didn’t quite get that ( p.s haven’t seen this o-ring floating around in mind )

Hey folks, not sure if this has already come up in this thread (I searched and couldn't find anything, and apologies, but I couldn't bring myself to read through all 190 pages of posts) but a quick random one for anyone looking to buy (or having bought and regretted buying) the SAA/Ace 1 Arms PMags: Have you noticed yours are leaky AF? Mine were. Could barely rattle off 4 shots. So I bought the G&P 'stendos, which seem decent, but still not amazing. However, if you open up the SAA mags and take the release valves out, you'll not only notice that they're standard TM-spec 1911/MWS valves (easily replaced/repaired), but you'll probably also find a seal rattling around the inside of your mag. As you can see from the attached picture, not only have they completely come off the valves, but they're also flat and hard and torn. Replace these with TM or LPE or even WE/Army, and you'll have a way better time with them. Not sure where SAA/Ace 1 get their seals from, but this is pretty shocking.

Rediculously overkill optic for my cyma cm.002 Ex police leupold cqt with a vector frenzy auto attached via a custom mount a mate knocked together for me.

Yeah, ordered this then, though it was cheaper for me to do it from Aliexpress than them... It's a shame: I will be able to use this gun in the field this weekend once again, and I already received 410mm Crazy jet and nub + rubber and was prepared to upgrade but now I cant do it until i get this tool kinda frustrating... One more question, do you really need a vice for this job? Or I maybe can get away with heating barrel nut and trying to unscrew it ? Yes, you and me both, I was amazed by the information that is given here! One of the reasons I went with TM M4 platform instead of GHK

Yes, that’s the one. It might be better in summer, as I’m currently putting all sorts of winter gas through mine which might be smashing it a bit. Nuprol 3.0 and 4.0, Guarder black, MAPP - I think these add extra wear. I stripped it down today, and gave it a really good clean with IPA, it’s actually not in that bad condition. I think they’re probably good for 2000 to 3000 thousand shots. I’ve stuck a Laylax purple in for now, will do some range and accuracy tests tomorrow. Weirdly I’ve gained about 70 FPS! Must just be a better air seal with the nozzle and less friction on the bb due to less surface contact.

Gone down for me ..... my doctor doubled the quantity on my prescription, which turned it into half price I also suffer from free shit syndrome, and find my pockets stuffed full of freebies

I've been naughty again... Genuine US LBV-88 Enhanced combat vest, with x4 Genuine grenade pouches (From Finland), genuine M12 M9 pistol holster from surplus place in UK and Genuine 3 day buttpack attachment. (From France) to add to to my growing collection of M81 Woodland. Plus M81 windproof smock and M81 Gortex jacket...all running with my Bolt M16A4 (That Luke fixed for me..) Also not related..decided to become a Wanker as well and bought a G&G 2400 round drum mag for my MTW, for some high speed speedy boy shit...for giggles. Have M81 plate carrier with midcaps for when being a bit more normal with it.

The topic of ‘Fees’ rears it’s ugly little heads quite regularly and in the end it always ends up the same way , you’ve got one side that says you should have one single figure that you ask for that covers everything and on the other you’ve got the ones who go in to very long winded reasons for why you have the goods price and then P&P plus PayPal is tagged on after . One of the biggest reasons they Say this seems to be letting the buyer choose the delivery method instead of setting it them selves wether by parcelfarce/ Royal fail or Hermies/etc me I just do Royal Mail/Parcelfarce as my preference for who I’ll send via and that’s that you want anything else ? Sorry no can do .

dont have a vice, have a blowtorch and i now have to order additional tool for it This tool probably wont do the job ?

Not TG but don't you hate it when you specifically choose an alternate shipper to UPS and then they go and use them anyway!!! Well I won;t expect that order any time soon.

I’d stick to the Marui rubber truth be told. I used the tan modify one and it lasted a few hundred rounds. It may well have been the rubber was a dodgy one, who knows. The Marui is spot on. Always keep a few in the tool box from now.

Finally got my pistol assembled and mounted the scope to my g3 G3 is a lct g3a4 firing 435 fps and mechanically locked to semi with a warfet and maple leaf hop rubber. Scope is a hensoldt 4x24 s2 with aftermarket illuminator. Glock is a tm glock 18c with detonator cobra slide kit (absolute MF to install) detonator tti sights (required modifications to the slide for some stupid reason), gaurder extended slide and mag releases, gaurder lightweight bbu and ml crazyjet barrel and hop. Both are almost finished but not quite, waiting on a tti magwell and new trigger for the glock and a llm1 and harris bipod for the g3.

Finished this today

I think I'm finally done with my VFC SCAR-H. Parts: https://docs.google.com/spreadsheets/d/12v6YkUH44YzoyB8OpJLW5I2xgpuF0jbp0GJial5D-7Y/edit?usp=sharing I'm probably going to remove the flashlight, is there a smaller/lower profile one I could use? it's too chunky.

They are absolute shit lol. I have had loads of AG parts, all but one of them have problems..they clearly test nothing! There is no other explanation for it. Ag nozzle, weird full auto so removed. Ag bolt (sf version) piston wouldn't fit, also spring retainer wouldn't go in without modding. Ag outer barrel, hop issues when installed Ag maritime bolt catch, sticks out about 3mm more than a real one, so you cannot wind the mag release enough to seat it properly. They even admitted to me they screwed it up! Ag mag release, fell in half first use lol..pin just fell out! Ag charging handle, roll pins just fall out Ag lightweight bolt catch, needed heavy filing to move freely. Ag urgi v2 rail, will not fit an mws without their adapter ring which only comes with their outer barrel set which causes hop problems! The v1 rail was fine and had a more durable finish. Saying that, my flash hider is perfectly fine, even they would struggle to fuck that up. They clearly make things based on pictures on the Internet, this is why everything is out of spec..then they clearly do not test finished products on a base mws but on modified ones made from their parts. I hope they go out of business.

Update to the KWA DD M4v7 - - Slim motor (US import from Tactical Parts) - Replica slim DD pistol grip

KWA QRF Mod3 base - SIG Muzzle Brake - Midwest Industries 4.5" Rail - Replica Scalarworks BUIS - LWRC Inc Compact Stock - PTS MOE MVG and Pistol Grip Inside: - Gate Titan Advanced - Updated VPS system

Yeah I have the matching flash hider, I think I have sorted it. I was trying to treat it like a normal screw and having it all the way "untight" by having it full loose to the left. Didn't realise it is a cam lock and so I needed to fully tighten it right and then back it off slightly once it was on. very confused but sorted.

Fed up of waiting for a 2nd hand one!!

as it should be uk wide ?, well done to the Welsh (& Scots ?) for securing such a set up, although does make you wonder why England couldn't manage it.