Leaderboard

Little attempt at some bone grips modded from the original Tanaka ones.

#ready

I am using mine for a Ruger mini 14 build

My TM MK18 NGRS

Old vs new…

BEFORE and AFTER for reference Went mad with the ol' grate polish Also used some brown shoe polish on black to give it a subtle bakelitey tinge

Couple of new additions First up the Kel TEC RDB 17 by Ares. Haven't had a chance to use this yet but it feels great when in your hands and shouldered. Next up is my Secutor Magna Glock 17. Fired a couple of mags of this in the garden and I'm loving it. Very snappy. The stippling was a tad too aggressive when new out of the box but when you have gloves on you won't even notice.

Hells yeah!

New rail and grip arrived

New arrivals. G&G sr15 e3 mod2 knights armament and Novritsch SSG10 A3. The PEQ's 3m velcro adhesive sticker won't adhere on the rubber switch so I'm looking for ways to attach it to the top rail. Just incase the stock barrel and hop aren't up to the job (SR15) I've ordered a barrel and bucking from @ak2m4@ak2m4.

Purchased a lovely E&L. Don't plan on doing anything to it modifications wise, perfect just as it is ?

My latest acquisition - GHK G5 can see me chapping on @Alimcd door for one of those drum mags ?

Latest project. GHK G5 with a workshop special HPA drum. Creeps like a mofo with heavy ammo so I’ve done the adjustable nozzle mod, now it’s slinging 0.36’s at 250fps edit so it makes sense to @Rogerborg0.36’s at 1.1J

First attempt at kryptek, im pretty happy with it given it was my first time using stencils and only my second time using spray paint. I will put the internals back in it eventually, i just need my hex wrench set to hurry up and ship!

Finished

Steady the buffs! Lol

Hi all ? Has anyone noticed that the spacing of the rungs on ladders has increased as the population get taller? I think it's down to climb it change. ? Regards

Thats what i thought, its the BB loader thats damaging the gas routes on the G&P nozzle, sand it back so it matches the height of the TM nozzle

The G&P adjustable stop has 3 different holes for the thin cross screw so it adjusts how far forward the valve sits and thus the power. I was getting 180fps / 260fps / 290fps on green gas and 0.30g BBs at 18degC on the low/mid/high settings IIRC. Stock TM bolt/nozzle/etc

lol to the stock. Just get a ghk innit.

Others have found that it gives higher power. I have used a RA Tech NPAS in a TM nozzle / bolt and found it pretty good at dropping the FPS. You need the black one, as the silver (WE) one is too fat to fit. I would check what is in the G&P nozzle to start with as they might have used the 3 position valve stopper (or get one for £9 from Firesupport) as this can be used to alter the FPS too. A spare nozzle and nozzle spring would be the minimum, I usually take a spare complete nozzle (easier to swap out) or complete bolt (even faster to change) Other than that taking the AEG as insurance might be a good move. I have found the MWS to be very reliable but if you have travelled to the other end of the country and still have 23hrs of game play left if would suck to not have a rifle!

【CUSTOM GBB WORKSHOP】 BERETTA 92FS INOX ITALY WE new M9 silver base deep marking, deep 0.3mm front sight, rear sight, Extractor, firing pin block, cerakote custom wood grip Stainless steel Inner Hexagon Grip Screw 【CUSTOM GBB WORKSHOP】 sig p229 silver WE base deep marking, deep 0.3mm cerakote custom grip Stainless steel Inner Hexagon Grip Screw

【CUSTOM GBB WORKSHOP】 TAWIAN military T65 Rifle WE base deep marking, deep 0.3mm Anodizing detail fix 【CUSTOM GBB WORKSHOP】 SIG P226 MK25 NAVY WE mk25 base deep marking, deep 0.3mm custom grip

My MWS ?

As the gynaecologist said to the elephant ?......?

I tried donating blood today. Never again! Too many stupid questions. Who's blood is it? Where did you get it? Why is it in a bucket? ? Regards

【CUSTOM GBB WORKSHOP】 COLT M4A1 with M203 12" GHK & BELL base deep marking, deep 0.3mm real m4 stock recoil pad detail fix

This is something I kinda put together. I wanted to combine what I like about plate carriers (elastic cummberbunds instead of straps, and after market support) with what i like about chest rigs (they don't need to have plates in them). In the photo I have it set up for use with my LMG so I have two box mags in the front. If I want to switch to the M4, then I clip in the other bit to the side there. Its still a WIP but I think the proof of concept is there. Bullgear hydro bag Viper elastic cummberbund Panda tac GMR-style 40mm bandolier Viper mini chest rig with FMA kydex insert and viper elastic inserts + cellargear dangler for timed bfgs MCx custom gear GMR-style minimap + hw holsters timed bfg holsters Some velcro back pads I got off ali (forget the name)

That would be a miracle considering its a GBBR....

The new IDOGEAR G3 repro set is really good:

Saddam's gold plated AK-47 ?. Metal body, real wood furniture.

Me on a very wet sunday could have done with a wet suit and fins

here's my current airsoft loadout, a simple multicam webbing set

A couple from the weekend with G3SBS

always me that has coms issues XD IMG_20210726_043430_621.webp

A Dye I5 mask! Go on judge me, i don't mind!! My revision bullet ANTs fell to bits and after a new CQB site opened up 15 minutes away from me, I needed a new fog free option. Tested it out on Friday night, comfortable to wear and no fogging!!

Rocking the combat Jellybeans this past Sunday..

My loadouts - waiting on my tropical helmet cover to arrive and some Greek lizard pouches also in post. trying to find a Greek lizard fast helmet cover that will ship to uk - the places in Greece wont ship due to customs and shipping or so they told me

Last game I went light camo as it was so hot lol.

If anyone ever wants some good pictures taken, go over to Warzone airsoft best action shots I have seen.

A couple of nice shots of my son and I at DTW Airsoft yesterday, having a great day. This was the first time out for me with the AAC T10 and playing the sniper role and my son with his new LMG eating up bb's like there is no tomorrow ?

two from today

Accidentally actually used some of my kit.

A western one, found this one quite comfortable and useable. It's just brown boots Tan chinos (which were a thing in the west) Shirt A nicely aged thin leather jerkin A crossdraw holster And the obvious hat. Tanaka SAA, photo taken by the fantastic Airsoft Project and then put through a western filter by me. Photo taken during a duel.

It's a tad hot in here! Russian KMPP Anti-Cut/fire suit. This is the "Medium" size. Still massive on my 6,3ft frame! It's very very heavy too. Izlom Parachutist suit. It's a bit big for me like most Russian stuff.

An absolutely amazing processor and incredible value for money. I was surprised to get almost 5Ghz when I overclocked it. Got very lucky on the silicon lottery.