Leaderboard

Normally I use a mids with a high cap for those shtf moments. As others have posted, the "battle maraca" reputation of high caps is often exaggerated and is only really apparent if you're bouncing around like a gazelle

Alright, *now* my MTW is externally done. Still need to tune it properly and add some “softening material” to the front for it to be 100% inside, but I’m really loving how it’s turned out, as long as I ignore the cost haha.

Big iron day well , big heavyweight abs day ?

there's a difference between doing things that are required for day to day life, like driving to work, cooking, and keeping yourself warm and spending money on frivolous luxuries that you can absolutely go without. we should be incredibly grateful that the cost of this war for us in the uk is being charged in pounds sterling and not blood. individually maybe not, the point is when done collectively all the little slices of fuck all add up to make something of substance. every Russian factory/shop that shuts down due to lack of sales is a crowd of disgruntled workers who won't be fans of how Putin's government has messed up their lives.

Exactly, just like the covid 'heroes'... its only me it wont make a difference... yes but theres millions of 'me' Not saying the individual Russian airsoft store should be the one at loss from all this, but its all these little losses that may add upto a change for the better.

Looks like a perfect starter set up to me ? As above another mag or two for your primary gun will come in handy, and good ankle support is essential (some sites won't even let you on without it, reading between the lines they've seen too many people with twisted and sprained ankles). What will happen is that after a game or two you'll figure out what works for you and what doesn't, so don't sweat about buying more kit until then.

If you're havin fun you're doin it right ??

Marketing =/= engineering

While it is important to support the "Current Thing". Until everyone stops buying oil and gas from Russia. Me abstaining from spending £40 with a small independent airsofter is not going to make fuck all difference. I truly hope you have not driven, heated or cooked anything since this War started. Otherwise you're just virtue signalling. https://www.independent.co.uk/climate-change/news/uk-russia-oil-ukraine-war-greenpeace-b2066346.html#:~:text=The UK has imported around,at the end of February.

I went to a wake today. I've been to several now; but none of them have worked.

Funny that people don't feel the same way about sending money to American or Chinese companies whenever their respective governments gun down a minibus full of kids, assassinate some journalists or harvest organs from prisoners. Nor for that matter did anyone seem to be all that bothered about buying Russian kit in the aftermath of Georgia and Chechnya. We've had a hand in demolishing a few countries ourselves in the last few decades. Let's not get carried away with framing this as a moral choice, or implying some kind of treason or direct contribution to whatever misery the Russian government is inflicting at this moment. If people want to draw a line with where they spend their own money then fair enough - personally I don't buy anything from Amazon, but I'm not going to judge people who do. On a practical level you'd have to be nuts to try and mail order Russian replica firearms parts at the moment. But it sounds like some people are a few newspaper headlines away from burning their cyma ak74s at the moment and it's all a bit silly and hypocritical imo.

Same for me as everyone else really , I do prefer using mids for a couple of reasons , 1 the lack of winding , 2 I enjoy having to do mag changes and the little adrenaline rush(or butthole puckering) you get when your down to your last mag and there’s no obvious let up to the gun fight your involved in ! ? but I also always carry a ‘Hail Mary’ hi-cap with me for the “oh shit this is going to end badly !” Moments you invariably get ! But saying all that at the end of the day when I’m absolutely bollox’ed but still want to keep playing or the weathers just too hot for full load out I’m more than happy to head out with just a gun and couple of hi-caps stuck in the pockets of my combats and bog all else .?

Perfect for GBBR's too. ?

Im sure others will let you know but I would say with the bolt probably the high £300’s, without maybe closer to the lower £300’s. Only because it’s had the marui magic removed and unknown rail. You may be better off splitting it up, I know some people would snap your hand off for a extra lower, some for an upper etc.

Well I gave up building houses a few months ago and got myself a wood lathe. I've been turning small religious figures. I enjoy it but just cant seem to turn a prophet ?

It's a good thing really, otherwise you'd miss the hilarity of shooting people in the hand as they're standing there pointing at your position...

I'm with the "No Russian" crowd, but if it helps settle the drama any I've got a spare Bullgear 249 hop I can sort you out with.

Tippmann's chug along rather being the high-RoF-overkill-machines some of the other HPAs are... I'm ok with that given the extra immersion of the recoil, but it's personal preference really.

I bought a v2 recently. It's great fun to shoot, but not shooting as well as I'd like. So do test fire it before buying, and really you want to shoot it somewhere where you can ensure it's accurate at 40+ metres, not just at short range. This means the gun's power, innate accuracy (or lack) and the effectiveness of the hop can be gauged. Ideally take some heavier BBs with you for testing the hop. (If you can only test at short range, make sure it feeds properly in semi and full auto as the minimum. Try to take a chrono to test the velocity variance isn't too much) I started a Tippmann owner's thread, so feel free to bung specific questions in there. In terms of maintenance, the stuff I've meddled with so far has been quite 'mechanical' and simple - easier so far than fiddling with an AEG gearbox. But then again it's not working quite right yet... I'm a million miles from being the right person to ask

Wot he said?, if your moving fast enough to rattle a hi cap enough for players to hear, their just as likely to see you, irrespective of how good your camo is, the eye will always pick up that kinda movement, unless your Elmer Fudd ? PS, loading your hi caps properly, ie feed tube full & mag full will stop the mags on your rig from making a sound, then all you've got to worry about is the mag in your gun, which shouldn't be hard enough to keep steady & silent ?

Welcome. You look like your taking a pretty sensible approach. I use one of these mesh masks and personally I think it's great. https://www.amazon.co.uk/dp/B07953M6Z6/ref=cm_sw_r_cp_apan_i_dl_5YXMAX5TEEC47GCHD7DX Has flexible cheeks so cheek welding and looking down optics is no issue and also has ear protection. As you imagined in your earlier post. It is no fun taking one to the ear so these are great and will work with most standard goggles or glasses. I'm using it with a valken goggle, cant remember which one now but they are fairly chunky and marry up with the mesh lovely.

... 2.28J Agreed, 100N seems to be about bang on for typical UK limit. I cut my 100N down a bit as I was garage testing with the hop at 5, but with it set to 8 for 0.43g, I had to add a little back again with Rapax adjusters (i.e. really expensive bits of tube). I honestly think the TAC-41 doesn't need anything done to it beyond a super-simple spring change. And, yes, the "Oi! Sniper! Gettim!" is pretty normal.

I guess I could consider myself a veteran now after 5 years of playing... I still prefer using HiCaps. Yes they rattle, but you are usually making just as much noise just by running around then the rattling of the high caps. When sneaking I have never had a problem with High Caps rattling to the point it gave away my position. High Caps means having to carry less mags which is always a bonus.

Both have a place and depends on your play style Midcaps run anything from 100 to 170ish rounds. So theres quite a difference in what you get I recently start running and AK. Of the 7 mags i have, 1 is a 400 rounds high and my word did i miss the fun early days when i ran 8 M4 300 round hicaps and a 9.6 3300 battery. BRRRRRRRAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPPPPPP! So much so I bought an LMG

I live in hope.... i guess we'll have to wait and see. the sad bit is the mag is wrong on the L42A1 but thats a minor detail.

My other suggestions (based on the picture, so if you have it already done these things, you can ignore me ?) would be to get a few more mags for the AEG or get a high cap one that you can quickly refill in a game, I normally go through my two mid caps and resort to using my high cap (as you can normally just tip your bbs in them quickly). It can be a bit of a ballache to reload your midcaps in the middle of a game with the type of speedloader you are showing. I highly recommend footware with ankle support so you dont break a bone when you foot goes down a ditch or rabbit hole. ? You might find that mask fogs up too, so try and pre-treat it prior to the game with some cat crap (yes, a real thing haha) or some anti-fog solution/wipes, you'll find plenty of opinions on glasses, goggles, masks and anti-fog solutions on here. Ultimately though, as @EDcase says, if you are having fun, you are doing it right, so welcome to the world of airsoft, hope you enjoy it!

Thank you! I've been trying to remember the name of a mount I saw a few months back and that's the one. I've quickly knocked up a version with Overbore-style cuts - not perfect (the bottom triangle is slightly too small but I wanted to keep the large fillet for strength) but it gives the general impression. As to your cheek weld question - I would say maybe not. That's something that gets lost with mounts this high, but as this dude says, cheek welds are thing of the past (yeah, it's a pretty bold statement that many would disagree with.)

It is taller. The height was a very rough guesstimate of the GBRS mount which is huge. Currently the 'rise' of the mount (top of the receiver pic rail to the top of the mount pic rail) is 52mm. Places the centre of the red dot at ~70mm or 2.75in. Won't be everyone's cup of tea, but the more I shoulder the gun with it, the more I like the concept, even just for Airsoft purposes to get around wearing paintball goggles. Looks better than angled drop stocks that I was playing with, and at least I can argue that there is real steel precedence for a tall mount, even if it looks a bit odd.

Looks a little less goofy and mounts much better now as a single-piece clamping design: Just waiting on a delivery of black filament today so I can print the final version.

That's a good point. Generally if using my LCT ak I run mids, but I also have one hicap on me for a "holy shit it's the whole team and I'm about to get charged" moment.

So, once again nobody has seen the shady link (in funny image language) in the OP's post... Fuck me you're blind lol

"Takes one to fucking know one" cheeky old fartknocker?‍♂️

Acquisitions through the middle of last year. Haven't written a list in a long time, but I'll make it optional viewing:

Idk. If they can put out a gas rifle on par with something like the PPS Kar98, then could be even better than this and more realistic. But if it ends up just another standard G&G historic Gas rifle with crap performance then yeah maybe. Also this relies on Ares not making theirs perform like crap too and overpricing it to the moon.....

I received a gorka from Russia a couple of weeks back. It was listed as UK stock. I ordered gear from Moscow in January and have had to raise a paypal claim as the seller reckons that the invasion in the last week of February has stopped it arriving. Bollox as it was supposed to be posted on the 16/01/22, five weeks earlier. The parcel was stopped in Kiev. So a bit of a lottery in my recent experience. As @Floperatorsays, if you try and avoid any state that occupies other states, you best make sure not to fill up any with Saudi petrol, or buy Turkish electronics, Moroccan herbs etc etc. Probably best to get an allotment too tbh...

Wot? You mean there is a single shot switch??? ?

have to say i agree here. at the risk of opening a can of worms I'm not sure how comfortable I'd be continuing to buy stuff from Russia given current events. I might like their kit on a technical level, but I don't want any part in supporting the present actions of their government, no matter how indirectly.

Myself and a bunch of others will be booking into this as it's my birthday weekend, Not sure whether we'll be Scavs or Bears at the moment.

Trying out some Pandora grips for one of my Capas

Did the unthinkable and opened up my MP5 and let the Japanese pixie dust out changed the bucking to a nineball purple rubber and also chucked in an eagle6 M100 managed to find a YouTube video of some Japanese guy taking the gun apart and it wasn’t too bad, struggled with removing the fire selector until I realised you have to pull the trigger as you pull it out

Right, so I wanted a picture of the FAL bull pup mentioned in that last section, and I found it. I rather wish I hadn't, it's melted my eyeballs and dissolved my brain

That's exactly why I never did it. However I get asked a lot of questions "what is the best combination of motor and gears" etc. Of course no right or wrong answer.

I think a more relatable test would be testing each motor with 13:1 gears and 18:1 gears together to a device that measures amp draw on semi and full auto. Of course you'll need a better sample of known brand motors etc. Guessing this was for gel blasters? Be nice to see just how spring power including short stroking affects amp draw, buy hey it's a lot of work putting together something like that.

I've gone for a Multicam Casual loadout, like @MAX DICKER it's a tight no rattle setup with a Spiritus Bank Robber chest rig, and Ferro Bison Belt with Esstac Kywi pouches. The Ferro Slingster is definitely the go to sling for shooting from both sides and pistol transitions.

Nicely done. It does speak to why you have your holster where you do though, always worth bearing in mind that game designers don't always place things because that's where they should be, so much as it's where it's easiest to put it for animating. As far as how you site your holster, it's a lot of personal preference but also a lot to do with ergonomics. If it's too far down your leg to draw without having to bend down/over then it's too far down. If it's moving about on your leg then it's too loose. In general drop leg holsters came about because people needed to draw around body armour and dropping the holster down gives you the clearance to do that. I'd highly recommend the Fobus EMC series (had one for ages for my HK45) but the draw does take a bit of getting used to and it would be nigh on impossible that far down your leg. I'd personally say that either a mid or low ride belt loop (safariland knock offs are easy to find and cheap) with a single leg strap nestled snugly in your crotch will make for a far easier life!

That describes quite a lot of airsofters. As others have posted, play the way that suits you and leave the charging around to those who are fitter/jacked up on monster

Size,age,shape have no meaning in airsoft. Well apart from the fact that if you are big and slow you make a better target for me who is also big and slow ? ?? Enjoy yourself and have fun ? Regards

Early 40s medically obese. You can play at what ever pace you want. Till he moved down south there was a regular player that played on crutches on a wood land site.

You're already home.

@Rogerborg Everything in your answer is very useful, thank you. That chart is perfect, I’ll be keeping that. I’ll definitely ask what gear I need, I don’t have much beyond eye pro just now. One of the problems I think I’ll face is that my whole life it’s been drummed into me to never, ever point a gun at someone. Now I have to point and shoot at someone. ? My other concern is I’m in my late 40s, fat, unfit, have bad knees and smoke too much. Oh well, in for a penny. Thanks again for your and everyone else’s advice. I have my answer, I’m happy to close the thread. Cheers Zedward