Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 03/05/23 in Posts

  1. Nah they're fine. Apropos of nothing, here's a nice picture of my wife at the beach...
    8 points
  2. Kudos to people who have dragged themselves out of the pit of despair. I've had depression and anxiety my whole adult life and unfortunately they both carry the joys of debt creation well. I've been there. I think I was u to £16k in debt at one point. The joy of opening the freshly delivered parcel was greater than the worry of how to pay for it. "Oh, I'll sort that at the end of the month" "I'll do a PayPal pay in three" "Whack it on the card, I'll pay it off" Over the years I've learned that having the latest and greatest doesn't make you the "man". In fact the opposite is actually true. I've had the expensive hobbies (rc cars, rc planes, Italian cars, marine fish, flying lessons, the list goes on) and each one has caused me issues. Airsoft with two boys of airsoft age is the latest. My boys want this, that and the other. So I'm TRYING to get them to work out what they actually NEED rather than what they WANT. I've shown them that a second hand whatnot is cheaper and just as effective if you learn how it works and fix any potential issues. My eldest got hold of my phone yesterday and decided to put an offer in on a drum mag for his AAP. The first I heard of it is reading a message from the seller accepting my offer.....needless to say I've had to apologize and have chewed him a new one. He didn't have the money and the bank of dad wasn't supporting this move. Big tears, big row and a big talking to and we have established that he is stupid for doing it (apologies again if you're reading this) but I don't need him to make the same mistakes as I did. It is a state of mind thing. You want something and the access to be able to buy it is waaaaaay too easy to do. I can go to patrol base now and buy a grands worth of stuff and it'll be here on Monday/Tuesday. In 6 months time when it's paid off plus double for interest and what have you, was it worth £2k? Nope. Depression and spending are inextricably linked. It's a black hole on loop. there's help out there (ironic that you have to pay for it, adding to the problem!!). Amazes me the kit that some people have. I wonder how much it adds up to but if they CAN afford it, good luck to them. Just pause over the "add to cart" or "buy it now" and think: Do I need it? If you're stressed, struggling or in a sand pit with you head buried, TALK TO SOMEONE. it helps. Trust me. I've been in your position. You can turn the light on at the end of the tunnel......
    5 points
  3. Stock photos kinda defeat the purpose of this thread Dontcha think
    5 points
  4. Poor guy can't catch a break, every post they makes he gets railed on ?
    4 points
  5. My wife accused me of achieving nothing so I told her, 'Well I won the Leslie Nielson award at school.' 'What's that?', she said. 'It's a big building with kids in it.'
    3 points
  6. Bloody hell, even an MP couldn't say that with a straight face. In my experience cunts and cheaters are attracted to it like flies to a fresh dog turd Careful, you'll give the guys at Killbox ideas
    3 points
  7. Indeed; unsurprisingly, real steel M4s do not rely on tiny screws to keep the mag release in place :). You can get a clip that will hold the ARL in place while you reassemble; https://www.ak2m4.co.uk/internal-parts/gearbox-tools/gearbox-installation-hands-kit
    2 points
  8. Rogerborg

    Customisition

    Agreed, I'd only use 11.1V on something that I didn't mind rebuilding. With even a moderately uPgRaDeD motor, I'm at the limit (or beyond) of what the mags can feed, and it's really a question of when rather than if something goes KERUNCH.
    2 points
  9. Have tried an assortment of those and no dice. Surprisingly hard metal for something that scratches so easily. Merged edit. Figured it out..... Bolt catch is held in with a pin, then the mag release needs pushing all the way in so you can unscrew the arm on the other side. Guess it's marginally better than a tiny little screw to strip.
    2 points
  10. Tackle

    Customisition

    Me personally I wouldn't use an 11.1 on anything I'm currently running , I've owned one 11.1 & while it definitely made things "snappier", it also spun the motors waaaay too fast, some mags struggled to keep up & it made everything I own sound like a "wanker gun", plus as I only use semi 99% of the time, every time a gearbox cycled & then tried to stop itself itself, made a horrible sounding "kerchunk" like it was hitting a wall, that can't be healthy in the long run ?. ?
    2 points
  11. SSPKali

    BBs in bulk

    Just tested all the BBs I own in my new (to me) TM M733. 300mm polished brass barrel, Macaron 50deg rubber, shooting 320fps on 0.20g. RIF was clamped, and some warm up shots fired and hop set. 10 shots fired at 10m and the diagonal of the box around the hits measured. *Warhead 0.28g - 43mm (30x30mm box!) Longbow tracer 0.30g - 45mm **Greendevil Bio 0.30g - 46mm Warhead 0.32g - 50mm ***Geoffs Super Precision 0.32g - 54mm Amoeba 0.30g - 72mm While it can easily over hop the heavier ammo the M733 likes 0.28 - 0.30g BBs and the Warhead ammo seems really consistent AND a good price! When I can be arsed I’ll check them in my MWS and see what results I get Obviously this was in my gun, with all the quirks and varied performance - YMMV * - Polishing the barrel with cleaning rod and Autosol dropped this from 51mm! ** - Spartan Airsoft specific *** - best in test for my MWS with CrazyJet barrel
    2 points
  12. Chelmsford half marathon completed today alongside the Mrs. I managed just under 2 hours she got back in just under 2hrs 45. Another step for us both on the journey to the London Marathon
    2 points
  13. Chasing that new toy? Need a new plate carrier for an “impression”, want to be adorned in the latest forward observations group drip? It happens to us all, we get lost down the rabbit hole, looking for that perfect load out, that ultimate “thing” that will make us the envy of Instagram / insert site name here…it costs time, it costs money…it can cost a lot more. If you’re struggling, talk to somebody…today I nearly lost a friend who is thousands upon thousands of pounds in debt, all from trying to impress everybody else. Is everybody doing ok? Vent here if you need, just remember it’s a game, don’t sink yourself financially trying to keep up, I’m guilty of it and I imagine there are quite a few others here too.
    2 points
  14. I absolutely agree, and the post wasn't intended to point out any posts that were or I'd have quoted the ones that I felt had. Purely highlighting there are two sides to it, and you shouldn't feel bad every time you buy something... as long as you're responsible in doing it.
    2 points
  15. I for one have throughout my life put into practice the right not to grow up I don’t think that any post here has demonised spending (even out of your means) The thread highlights other issues, whether spending is a temporary escape from the issues or whether spending is the cause of the issue In both the spiral is the same I take the thread as a call out to think, and to not be afraid of seeking help Just one is a victory
    2 points
  16. That unboxing buzz sure is addictive. It's great to hear that you're out of the hole now though, and helping your sons to avoid falling in it. Goddamn Klarna at every checkout. Can't afford it now? No problems, just pay it off later! No interest, no fees, no catch! Unless, you know, you can't afford it later either. Then they'll be happy to turn your payment into a loan at 19%. Can't pay that off? Then they'll turn it over to Big Baz at their debt collection arm and start piling on the fees and valuing your furniture. It's predatory behaviour: their entire business model is based on pushing people into the debt pit.
    2 points
  17. Since delving into this hobby I have learnt 2 things from those that go 1. The social and those you know make the weekend 2. The Airsofting is shit Those people that left the toys in the car all weekend had the best time....
    2 points
  18. OTH21

    Gun picture thread

    After a sale of one Rif and a trade on another today, my modest collection now stands at: LCT TKMS with DB GP25, with launcher attached it is very front heavy. Cyma cm077 - this will be my skirmish primary. King Arms faux wood M1928
    2 points
  19. I meant 1.06 to 1.07j 1.6 would be fun though in an arp9 wonder how long it would last ?
    2 points
  20. Impulse

    Gun picture thread

    "Take one out while the other's not looking" - Some guy in a video game circa 2007 I'm so happy this is working again. 55psi on the regulator has it firing between 1.112J at the lowest and 1.137J at the highest on .32s, so it's mega consistent and just where I need it for no MED shenanigans. I've semi-locked it, despite not being a "DMR" as it's meant to be an m21 sniper rifle, and the m21 was semi-auto only. Stubby mags are feeding flawlessly now, which is amazing as it means I don't need to run a chest rig as I can store 3 spare mags in a medium utility pouch (and they don't rattle around) and an Odin speedloader in another pouch, plus it makes it look very sniper-y and unique. I still have half a bag of .4s though, so I might rattle a few shots at 1.64J on the range (my local site's DMR limits) to see how it shoots there, but likelihood is I just keep it at 1.14J and keep the ability to point-blank, especially with how close we are to my local site growing some thick foliage through spring and becoming woodland CQB As the weather warms up, I might revert to my longest standing weapon combination: m21 sniper rifle and 1911 pistol is what I used to run when I played in Spain, because it's what I ran in CoD4 as a teenager
    2 points
  21. I once designed a couple of weekend immersive military experiences. In version 1, participants would arrive in the dark, ideally while it was raining, and would be sent off to dig slit trenches on the edge of a field. Once they had settled into their slit trenches and were just starting to heat up their ration packs, they would be ordered to move out immediately. On arrival at their new location, the process, or a similar one, would be repeated. Keep doing this until endex and then send them home. The alternative to this was to stick them in a barracks for a weekend, complete with ironing boards, irons, boot polish and all the other wonderful bits and pieces. Their first task would be to get their kit into a condition that would pass inspection by a grumpy former senior NCO, who would be well paid for throwing their kit on the floor, emptying their lockers and shouting at them. Once they had got their kit sorted out to his satisfaction, they would be sent out for an eight mile run in full kit, ideally in the rain, after which they would have to do PT on the parade ground. This would be followed by sorting out their now wet and scruffy kit, again subject to Mr Grumpy's inspection and approval. Then, get them to clear up the barracks before they get a chance to eat. Keep this going for a couple of days and send them home. I thought that these would provide a far more realistic insight into military life. I also had an RAF variant, which consisted of checking into a 5 star hotel for the weekend and running up a huge room service bill.
    2 points
  22. 1 point
  23. Gate Nano ASR.
    1 point
  24. C-Diddy

    brands to avoid

    I think @heroshark raises a good point; people will generally make their mind up to buy something, come on here and say "Is a XXXX a good bit of kit" be told they should save their money, but then they buy it anyway. I've been fairly lucky on the RIF front, but, from personal experience, wouldn't touch anything by Armorer Works. Gear-wise, I've had Nuprol, Viper and 8 Fields back in the day. 8 Fields was fine as a starter brand for the money but the other two can shit off.
    1 point
  25. BigStew

    Upgrading a cyma 48

    what do you actually want the gun to do? what issues do you feel need to be sorted. just chucking a load of top of the line up grades can make you gun perform worse or not at all.
    1 point
  26. Great day at ucap green ops. Marshalls and staff were on top form. I, especially,had a good day because I have adopted a dmr role and the gun that I used,purchased from this very forum,(thanks @cyanide14k),performed faultlessly. I was surprised at how much more range I could get with .30. The scope made so much difference to target finding. Total of ten good hits although I have to admit to two home kills? Not a large turnout,about 45,but good, honest play all round with no player fallouts and lots of complimentary calls. I think I have found a style of play that suits me now that I am getting older.More relaxed and laying in wait from good cover. I will still switch to assault play on good days when the bones aren't shouting STOP! You maniac lol. Tired but happy?? Regards
    1 point
  27. To be fair to site operators thats kinda linked to the "herding cats/inability of airsofters to understand safety briefing in 5 game on in 15". Don't get we wrong I remember trying a new site locally (run by company whose name rhymes with "burst and lonely") who thought naming and giving origin stories for each of the marshalls followed by a round of applause was an integral part of the safety brief to paying customers (see also taking the players out of the safe zone into a literally sub-zero temperature area to give a 45min brief).
    1 point
  28. Cannonfodder

    brands to avoid

    The only brand I'd add to that list is Socom Gear, but I haven't seen anything from them for years
    1 point
  29. I haven't been to AWA for years but I'm also tempted to go up there on a non game day for a nosey at what's left of the old airfield. As I understand it the base was home to Lysanders and was the final departure point for many SOE agents dropped into occupied Europe
    1 point
  30. My only criticism, and this seems common to all sites I've been to, is the fannying around in the morning. IMHO gameday always seems to be 45 minutes later starting than it should.
    1 point
  31. Pretty much. If I'm going to sit in a field getting pissed for the weekend then there's no way I'm paying 100 odd quid for it That's about the standard for the NAF and it gets worse on the Sunday afternoon. A highlight for me was the kid who I shot in the chest from about 10 yards with my 8mm shotgun. He then ducked into the ferns (I could see them moving as he moved) and when he stuck his head up again I gave him the good news, at which point he started bitching about overkill. As for the marshals, I got the impression they were more interested in struting around going look at me in my hi vis vest, I'm important than doing their job. The last part which really put me off returning was the number of idiots walking round the safezone with a finger on the trigger and the safety off. Combine this with I hardly saw anyone actually make sure they didn't have one up the spout and I'm surprised nobody lost an eye
    1 point
  32. I have played GZ maybe a dozen times over the years since 2005. Never chrono'd once. Ever. I don't play there anymore - even though it's my 'local' site 15-20mins down the road.
    1 point
  33. It sounds like a great site to visit ?.
    1 point
  34. I have heard good things about AWA; I might have to take a trip up there sometime soon.
    1 point
  35. Colin Allen

    Customisition

    I run 9.9v LiFe batteries in anything that has a solid stock; anything with limited battery space runs on 7.4 LiPos, while the VZ58 and the AXR 160 use 11.1v LiPos because they run better on them. Like Tackle, I almost always use semi; I am not sure when I last used full auto.
    1 point
  36. Nick G

    Mullered mag release

    Real steel style, my GBBR's are the same.
    1 point
  37. It's the same method as on my Double Eagle M906, so there are similar wheels elsewhere ? I was fooled by it too, thanks to @Adolf Hamster for pointing out to me how it worked. Dan, have you tapped out the pin above the trigger?
    1 point
  38. I think you had the filters on . ?
    1 point
  39. Tackle

    Mullered mag release

    Gently tap a slightly oversized torx bit in to it should probably do it ?
    1 point
  40. Fun day at AWA, bit chilly, plenty of puffer jacket clad rentals not taking hits, another cluster fuck with guns not working.... But was genuinely fun. Touching cloth to start with (aka capture the flag) our team was trounced by time, but at least I kept up my average by being the one to get the flag for our team. Some how managed to bend my thumb back on itself too which is now v sore. The boy's M16 shit itself on chrono, so we have decided to make it my "learning to tech" gun. My newly returned (as in yesterday) Rapax M7 managed two shots on chrono before the gearbox locked up. So we were stuck my new Honey Badger and the boy's L85. The latter performed nicely. The Honey Badger was great apart from being incredibly fussy about the spring tension in the mags. Several occasions saw me lying in my back behind a tree taking fire on all sides trying to ferry bbs from a duff mag to the least fussy. Best game of the day was a rolling retreat, then counter attack, but sadly I got caught short with the battery dying at the end of the first round necessitating a 20 minute round trip to the safe zone. The Badger's accuracy is a little sporadic but then it was never going to be a sniper. Got more than my fair share of kills when I found a nice hidey hole behind a tree Marshalls were fair and kept things flowing once everyone was out of the safe zone. For some reason, two dappy old codgers decided to meander through the game area on their bikes at one point. Last time out it was a dog walker. You'd think the sound of explosions and 70 adults dressed in military gear brandishing assorted automatic weapons would have been a deterrent. But hey ho ?
    1 point
  41. Krisz

    Customisition

    Personally I would never use 11.1v on a gun which doesn't have (mos)fet. You just ask for trouble regarding trigger contacts. Nothing wrong with 7.4v. Is it snappier on 11.1v? Of course. ?
    1 point
  42. TheFull9

    Customisition

    Nothing wrong with a good 7.4v with decent C rating that's looked after. But if the gun says it's designed for an 11.1 then that'll make it a noticeable bit more snappy. 7.4 was more the standard when LiPos came in, but 11.1 is becoming more the standard now with new releases.
    1 point
  43. Brother was gauging my interest about attending NAF in '24 (too busy for this year) and apart from trade stands, food and it being a piss-up I wasn't terribly interested. I read stories about how the queue for chono was over an hour long and the standard of play (for those who did play) was shit and not even worthwhile. Am I pretty much in the right area?
    1 point
  44. Look at that subtle off-white decor. The tasteful daylighting of it. Oh by God, it even has a tripod...
    1 point
  45. Not quite. You still have to apply for an airgun loicence, but it's effectively an automatic add-on and only costs £5, instead of £72 for 5 years. It's shockingly close to being sensible.
    1 point
  46. There are post-conviction laws regarding airguns too. If you've a criminal record, possession can be a serious offence.
    1 point
  47. For a short time I worked on the Kent Police instance of the national firearms management system, nothing in there about Air-gun ownership. Certainly nothing at county level.
    1 point
  48. I know retailers have to record sales, but are they habitually collated by Central Services? Genuine question, I have no idea how it works.
    1 point
  49. Yes. Also you have to be 18+ to be able to buy pellets. There are other laws regarding the sale and use of airguns which aren't relevant to this discussion so I won't go into them.
    1 point
  50. Love me 3-points, simple as. Very much depends on the gnu though, where the sling mounts are, and where it naturally sits and balanced at rest. I find they work very well on an MP5K or G36C, not so much on an AR. But then, you can use it as a 2-point if that works better. Plus, it's more stuff to fiddle around with, which is half the fun. Bungies can get bent, simple two pointers work just fine.
    1 point
×
×
  • Create New...