concretesnail

Another vote for a name tag. I have mine on the back of carrier. Easy to see if youre looking at my back and it's short, easy to yell.

Bin it. A good charger can be the difference between ashes and a home.

It'll be the bbs causing it, the cheap bbs are usually poor. Stick to better quality bbs and you'll have fewer issues I'm sure. Good good getting everything cleared.

I've seen the rules in the past and in the end I just didn't play those sites. It seems stupid idea in my opinion. Hpa has tournament lockable regulators etc, just require those. As for co2 being over anything has the potential to be over if you adjust/build/modify it that way. I have a co2 m9 I've used for winter and have done for years simply as it's much better at dealing with the cold than my green gas pistols at the time. All I'd have suggested is that you contact them and ask for clarification and then vote with your feet/wallet one way or the other. Not all site owners/operators are the sharpest of tools or brightest of lights.

Thanks, I'll have a look. So ive found that of I go for a wolverine I can use the g&g g2h gear box and mod the wiring loom I can put the electrical cut off into the fcu circuit. I haven't had the funds to brave it yet but here's hoping for some project money....

You can't have both really. The hybrid replaces trigger contacts and uses optical and magnetic switches. The etu++ has all the same settings/features, bar trigger depth and sensitivity, but as it uses the g&g electronic trigger unit you retain the stop on empty, have a much easier fitting (just plug it in to the g&g loom) and it's two thirds of the price.

Nice loadout. I'd guess the pic was taken at the gaol.

All good then, carry on. It might be worth trying the stock motor, it's not bad and I'd swap the stock mosfet for the perun etu++ unit. More setting adjustment and more robust.

Check your inner barrel length, so you don't go longer than stock, as the cylinder is ported and the gears are short stroked to match.

I think first and only in Wrexham were doing one on a regular basis, if that's any help.

Do you have the additional spacer for the WAS holster. A lot of the second hand sale seem to ot have it included. If you don't it might be worth seeing if you can find one, old make the difference.

Asomodai, have you tried using a uv security mark. Something we used to do when selling high value items was to place a UV security mark on the disk. And something I do when selling vinyl is to close up image all of the pressing numbers so disc switching is extremely difficult to do. Beyond that I'm glad you got at least a better result than I'd have through likely with the state of ebay of late.

Rubber on to barrel dry and gentle, then a wipe of silicon lube on the outer, away from the lip, to ease it all into the hop unit. I found it helps if units are a little tight, and stops the rubber from being distorted or torn.

Bang on. Its the players which make or break the dayon a site and if anyone is acting like a like a prick with an extreme rate of fire it should be the marshals who have a word and make it known that they need to curb it or leave.

Your best bet would be to continue to play and if your parent was willing, talk to the shop on site, as they would be fully aware of your participation and that would be the defence. Ukara attemps to prove intended use and participation for retailers; to sell to a buyer who isn't present, I.e. over the Internet or who has walked into a physical retail store, rather than somebody who is on site and has an active history on that site. If your site doesn't have a sensible shop then you'll likely out of luck.

If they wanted to sub an out of stock item they have to agree it with you before they do it, unless it's in the t&c. If you don't want it as uts not the ratio you ordered make them pay to get it back or take it up with PayPal etc.

Looks about right, with the mags standing away from the body.

He must know where his towel is, he's on this forum.

Allen key set. Gaffer tape Elastic bands Paracord Cloth tape/finger tape

That's not a bad shout. I used big luggs on a lot of my work tools, good stuff.

When running my vsr or dmr I have a weapon link which I've attached to 90° adaptor on my mp9 so it stays flat to the body. https://bombupairsoft.co.uk/products/fma-weapon-link-retention-molle-dark-earth?variant=31913145434215

I heard very mixed reviews on the customer contact front, but having seen the product, they are good. Having said that I tried for a set but in the end I gave up trying to get any communication out of them and made my own weights. I hope you have better luck than I did.

Start with your ht leads, give them a once over with some wd40 or other moisture displacement compound. If the outers start to break down then they become susceptible to higher resistance due to moisture.

Like you I use custom molded when I'm riding, and before that I used foams, I've always preferred helmets with lots of venting and the wind noise is killer long term. I do love the bang and booming of pyro and I'm surprised how many people I see playing that don't use hearing protection, I treat mine like eye pro. Once it's gone, it's gone kind of thinking. On the peltor front though I certain recommend the gel cups, they are so much better than the foam.

If your thinking about hearing protection then do it, either in or over ear. I've tried the in ear units and they work though fit is tricky, for me i couldnt get it to hold and seal easily, and wasn't as good as it could be when it did sit so it would work loose then eventually fall out. In the end I when with the over the head, peltor sporttac, and i also got two aux cables, one mono, lives hooked into my rpc and mic. And the other I use for work plugged into my phone for audio books and they are great.