Salamanca
-
Posts
125 -
Joined
-
Last visited
-
Feedback
100%
2 Followers
Salamanca's Achievements
-
This advert is COMPLETED!
- FOR SALE
- USED
DAYTONA GUN M249 HPA – CLASSIC ARMY. Sadly not getting used anymore, as I am into my DMR. Great recoil and sound, making for the ultimate support weapon. Has just had new Daytona Gun hop rubber fitted, which will need a few thousand bbs through it to break in – always the case with the Daytona system. Fires at around 1J depending on PSI. Has been used hence there will be marks from skirmishing – the previous owner built the gun with a used Classic Army donor M249. The system is in perfect order. Comes with the all-important GetSome 1000 oil – the only oil to be used with Daytona systems. Also comes with a 2mm allen wrench (shown), as this gun has had the hop adjustment mod (see pic) enabling the hop to be adjusted without having to remove the barrel. The Classic Army box 1200 rnd 9V mag works a treat – perfect feeding (battery supplied). It is an auto-winder - working off pressure, not like the awful sound activated A&K mag. Watch video you will see and hear it function perfectly. The attached video shows the gun firing at just 100 PSI (this is the setting for my DMR). Ideally the M249 likes to run at around 130PSI for a decent rate of fire (max 150PSI). These guns like high quality bbs (0.28 to 0.32 ideally). The price includes the M249 case as show. You can test fire at my home if you want to collect, alternatively PF48 will cost £25 as it is quite large. LINK FOR VIDEO: https://youtu.be/qAtpbTh8Hv0550.00 GBP
Crawley, West Sussex - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
DAYTONA GUN M249 HPA – CLASSIC ARMY. Sadly not getting used anymore, as I am into my DMR. Great recoil and sound, making for the ultimate support weapon. Has just had new Daytona Gun hop rubber fitted, which will need a few thousand bbs through it to break in – always the case with the Daytona system. Fires at around 1J depending on PSI. Has been used hence there will be marks from skirmishing – the previous owner built the gun with a used Classic Army donor M249. The system is in perfect order. Comes with the all-important GetSome 1000 oil – the only oil to be used with Daytona systems. Also comes with a 2mm allen wrench (shown), as this gun has had the hop adjustment mod (see pic) enabling the hop to be adjusted without having to remove the barrel. The Classic Army box 1200 rnd 9V mag works a treat – perfect feeding (battery supplied). It is an auto-winder - working off pressure, not like the awful sound activated A&K mag. Watch video you will see and hear it function perfectly. The attached video shows the gun firing at just 100 PSI (this is the setting for my DMR). Ideally the M249 likes to run at around 130PSI for a decent rate of fire (max 150PSI). These guns like high quality bbs (0.28 to 0.32 ideally). The price includes the M249 case as show. You can test fire at my home if you want to collect, alternatively PF48 will cost £25 as it is quite large. LINK FOR VIDEO: https://youtu.be/qAtpbTh8Hv0550.00 GBP
Crawley, West Sussex - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
VFC SCAR GBBR MAGAZINES. I have four available. Have been used twice. Selling as I have had my SCAR H converted to a hybrid HPA GBBR by Frog Airsoft Engineering, and it now uses propreitory magazines. £160 plus £5 for delivery.160.00 GBP
-
Crib Gogh Plate Carrier, Belt, backpack and Surplus Gas Mask bag
Salamanca commented on Alex89Type's advert in Gear
£40 all in. -
This advert is COMPLETED!
- FOR SALE
- USED
TM 1911A1 - UPGRADED WITH HOLSTER PACKAGE & 3 MAGS. Upgraded with TTI CNC TDI HOP UNIT, CRAZEY JET BARREL AND ML MR HOP RUBBER - VERY ACCURATE. 3 X GAS TIGHT MAGS. WOODEN GRIPS PLUS ORIGINALS. ORIGINAL BOX AND INSTRUCTIONS 2 X HOLSTERS - ONE A SAFARILAND CLONE SPRAYED TAN, WITH FORK MOUNT, AND A BELT MOUNT, THE OTHER A CLOSE CARRY BELT HOLSTER. IT ALSO HAS AN ALUMINIUM OUTER BARREL PLUS THE ORIGINAL. £150 PLUS £7 DELIVERY.150.00 GBP
Crawley, West Sussex - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
EvolutionGear ATACR 1-8X24mm First Focal Plane LPVO W NF MA479 1.54'' Mount In perfect condition, complete with original box, however I have lost the adjustment throw lever from the zoom adjustment ring. This does not affect its use as it is easily adjusted without it (many scopes are not fitted with them) - subsequently the price reflects this. Super clear optics - as shown in picture, lenses perfect. Normally £300 plus shipping from the Far East. £185 which includes shipping and fees.185.00 GBP
Crawley, West Sussex - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
Vortex Optics Sparc AR Red Dot Sight FDE - CF-AR2-TAN Very little use - in perfect condition, complete with AAA battery, cloth, tool, instructions and original box. Normally £210 new £130 which includes shipping and fees.130.00 GBP
Crawley, West Sussex - GB
-
This advert is COMPLETED!
- FOR SALE
- USED
Magpul PTS NGRS PMags x 5 Very rare no longer made. 120rnd Feed flawlessly, have been painted and have ranger plates fitted. £225 which includes shipping and fees.225.00 GBP
Crawley, England - GB
-
Mad dog 49 reacted to a post in a topic:
THE TM MWS thread
-
I have cured MWS bolt-bounce with an Angry gun heavy buffer and a heavier spring. It seems a problem that some rifles suffer and some do not, as I have had this problem with just one of my rifles. You may be able to cure it with one of those buffer weights fitted with small weights inside, which I recall is what Ollie used.
-
I have found p mags slow to fill, some more than others. What I do is heat the gas cannisters first by putting them on a radiator for a short while to increase internal pressure. If the cannisters are half full this is essential as the pressure is too low to over come the fill valve, and the internal gas pressure for any reasonable period of time. In terms of filling at game site , I keep the cannister in a thermos flask thermal jacket with two small rechargeable hand warmers on either side. I bought both the thermal jacket and the hand warmers cheaply on Amazon. Also small £9.99 digital scales are a great tool for keeping tabs on gas levels- an empty GM P Mag weighs 339/340 grams, and full to the limit is around 370 grams, with consumption at around 5 bbs per gram.
-
Guns Modify do a metal hop adjuster wheel. It has 36 adjustment increments as apposed to the 24 in the standard plastic adjuster wheel. Subsequently it is much more precise, and has a metal plunger with a strong spring. I have fitted it in 2 of my MWS rifles, and it holds zero perfectly. It is rated to only lift 0.35bbs, but with the high end hop rubbers now available, like the Pink Flamingo and the ML MR hop, I have found it has no issues with 0.40s and 0.43s in my DMR builds. However you will likely have to buy it from HK from somewhere like Airsoft global, though you might get it from Fire Support.
-
C-Diddy reacted to a post in a topic:
THE TM MWS thread
-
I am running Abbey Sniper gas in the summer which is effectively green gas without silicone (which is why I use it). In the winter and Autumn I run Mapp gas with a Madbull Propane adaptor for filling. Silicone-free Mapp gas provides the same level of power as Guarder black gas, and costs very little from a builder's merchant. I have uprated all springs in the nozzle, and I run 120% or 130% buffer springs with heavier buffer weights. My HAO MWS has a steel CNC Robin Hood bolt carrier with a brass end weight, so plenty of strength and recoil. I feel no need to run 144a in the summer, as all my rifles can easily handle green/sniper gas, and if I need a low muzzle energy level, I turn the NPAS down.
-
C-Diddy reacted to a post in a topic:
THE TM MWS thread
-
I have fitted a Prometheus 370mm 6.0mm barrel and NPAS to my MWS MK16 build. It is a DMR, normally putting out 1.8J on 0.48s, and the range and accuracy is outstanding. I also have an HAO 416 MWS, which has a 250mm 6.01 PDI barrel, and this rifle is equally impressive in terms of accuracy. I have also had good results from a 410mm Crazy Jet barrel in another of my MWS collection. As many people will say accuracy is down to bore quality, but tight bore barrels in gas rifles always make best possible use of the energy available. If you are going to run at sub 1.14J levels then a 370mm Prometheus barrel in either 6.03mm or 6.00mm form, will take you over the limit. An NPAS does give you the ability to tune the rifle accordingly - for example my HAO in the current 30 degree hot weather, had a 30% power increase which I could adjust through the NPAS.
-
Salamanca reacted to a post in a topic:
Lambda/DCA GPMG
-
I have several MWS and I run them on sniper gas in the summer(no silicone to contaminate the hop) which is slightly stronger than green. One of my rifles, a MK16 DMR runs at 2.2J (RIFT airsoft have a 2.32J limit for DMRs) and it has had no internal modifications apart from Laylax hop unit, Laylax barrel, TNT bucking and Omega nub. I have bought an uprated Eagle6 spring set which I have not yet fitted, and so far nothing has broken. One of my other MWS and Archwick L119, is internally Guns Modify, and I have had no problems with it yet on Sniper gas. During the recent winter with temperatures around zero I ran both rifles on MAPP gas (strong black gas) with no issues. However I would say it would be wise to upgrade the spring set, as this costs little, and in the summer maybe use a stronger buffer setup.
-
C-Diddy reacted to a post in a topic:
THE TM MWS thread
-
I have 7 GM p mags. Two leaked from new which I fixed with some PTF tape around the fill valve on one, and with the other a good dowsing of silicone oil in the exhaust port/gas router for the other. The silicone oil eventually softened the router internals to a point where it sealed. I then let the oil drain out and wiped any surplus away. You need to load them with a speed loader, sliding the mag external cover down is a waste of time... bbs everywhere. I found it best to epoxy a speed loader tip onto a loader for zero movement, and then get the feed angle right. The mag lips do get easier, though hard to start with. The strongest speed loader for the job I found was a Viper 155bb loader at £6, other loaders like the 470bb TM mag loader simply cracked internally due to the pressure needed. Gas capacity is big, they do not like Abbey gas nozzles, but do like the Madbull propane adaptor. FPS is slightly higher. Recently in the cold weather at 4 degrees C using MAPP gas with the Madbull Adaptor, (equivalent of Guarder Black in power terms) I got 94 shots from one fill with good consistency.....at 1.6J. Quality is good, and they are noticeably lighter.