Llamudos

Hi There, Looking for help from any that has taken a WADSN DBAL a2 Peq box apart. My Laser stopped working and i noticed that some of the wires had come loose. I'm hoping that someone could take a picture of the wiring layout for the internals. When i took it totally apart i had a mare and the wires were very poorly soldered (and poor quality). I tried replacing them but ran into issues as other wires also broke away. Now i'm a bit of pickle. If some kind person could carefully undo the 4 screws from the cover and gently separate the top from the bottim section and take a picture it would be very helpful.

Cheers will try the ASG m115 as im only getting around 315FPS with the ASG m105

Hi GURUs of the Krytac. I'm relatively new to to pew pew and have what i hope is not some silly question? 1. Could i simply add some 10p metal washer to the stock spring bolt that pushes the spring into place? This would surely increase spring tension and power? 2. Do SPR,CRB and PDW FPS differ due to barrell length if the same spring is used in all 3 rifles so if an asg m100) is used will they all fire at different FPS ? 3. Acetech lighterBT tracer unit has a built in Crono. WIll this device provide accurate reading when set to crono mode? Any help from the experts and experienced airsofters would be extremely helpful I have recently purchased a krtac SPR -PDW bundle (already have a CRB) and added some new bits (Promethous barrell for the SPR and PDW) which so far has not appeared to improve anything Especially with an ASG m105 spring. Infact the FPS appears less if truth be told. Any advice would be appreciated. Cheers Lla mu Dos