Sam_G Posted May 1, 2014 Posted May 1, 2014 This will be a bit of an ongoing project. Picked up a slightly tired TM CQBR recoil. The internals are solid and the recoil is nice and crisp. BUT the externals are a little worn. Bit for it so far are just out of my kit bag and left over form my old VFC SR-16. EOTech 552 KAC fore grip Weapon light in Element mount it came with: Genuine Magpul MBUS rear sight Clone ARMS folding front sight and a mega rare Eagle 6 7.4 3200 lipo. Internals are going to be upgarded once funds permit. SgtTalbert, Happy, Airsoft_Mr B and 1 other 4
Happy Posted May 1, 2014 Posted May 1, 2014 It's a TM they're all accurate What sort of range is this hitting consistent groupings?
Sam_G Posted May 2, 2014 Author Posted May 2, 2014 I'll do a proper test later today. Need to be careful as i dont have the charger adapter for my lipo yet and unsure on its charge level at the mo.
Sam_G Posted June 2, 2014 Author Posted June 2, 2014 This is turning into a right lemon! Had feeding issues with all mags and have had to place a small piece of soft side velcro in the mag well to force the mags forward for it to feed. So that is sorted if a little bodged! Now the thing is eating fuses. 4 in a day. I have taken the stock off......this is where the issues start. The rear connector on the stock tube has not been tightened properly which meant i have damaged them taking the stock off! The wire cover, which is the bit with the stock position holes in it, has 2 screws holding it in place. These screws have been threaded and the internal threads on the tube are so badly damaged they have fallen apart! Now i need a new stock tube and will be rewiring it to remove the quick change battery set up so i can use normal lipos. few pics of the issues:
Recommended Posts