SuicidalBarrelRoll Posted May 21, 2014 Posted May 21, 2014 List the most economic 50 quid to slend on the JG Bar 10. Go.
Unrustle_Thine_Jimmies Posted May 21, 2014 Posted May 21, 2014 SHS steel sear set- about 15 quid from ehobby Dangerwerx type B lever- 20 quid from ASPUK Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods. DIY mods- Seal hop up buckings with dental floss Seal cylinder with PTFE Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful. Thoroughly wash the hop up buckings in fairy liquid do the google dance for more class DIY mods. Plenty can be done on the cheap.
SuicidalBarrelRoll Posted May 21, 2014 Author Posted May 21, 2014 SHS steel sear set- about 15 quid from ehobby Dangerwerx type B lever- 20 quid from ASPUK Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods. DIY mods- Seal hop up buckings with dental floss Seal cylinder with PTFE Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful. Thoroughly wash the hop up buckings in fairy liquid do the google dance for more class DIY mods. Plenty can be done on the cheap. How nice will performance be then?
Unrustle_Thine_Jimmies Posted May 21, 2014 Posted May 21, 2014 Performance depends on how well you build it really. You can have a full 2000$+ VSR full PDi parts and still have it shoot like shit. Samurai 1
SuicidalBarrelRoll Posted May 21, 2014 Author Posted May 21, 2014 Performance depends on how well you build it really. You can have a full 2000$+ VSR full PDi parts and still have it shoot like sh*t. Say that I built it with those parts well...skirmishable?
Sam_G Posted May 22, 2014 Posted May 22, 2014 My old BAR10 had ASPUK - piston ASPUK - cylinder head ASPUK - 150 spring SCS sear set WE hop rubber Dangerworx type B hop arm I also did the PTFE tape mods and made some leccy tape barrel spacers Just a little bit over you £50 budget but that saw 507FPS on a .2 and some great range.
SuicidalBarrelRoll Posted May 22, 2014 Author Posted May 22, 2014 SHS steel sear set- about 15 quid from ehobby Dangerwerx type B lever- 20 quid from ASPUK Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods. DIY mods- Seal hop up buckings with dental floss Seal cylinder with PTFE Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful. Thoroughly wash the hop up buckings in fairy liquid do the google dance for more class DIY mods. Plenty can be done on the cheap. Are there any TM hop ups for the Bar 10?
Recommended Posts