JackHG Posted June 5, 2014 Posted June 5, 2014 Well I am now the proud owner of a G&G cm16 R8-L (yay) but I'm looking to replace the ris and stock with magpul gear (like everyother m4 owner ever) but being a complete noob I have no idea what handguard would fit the barrel. Please give me some suggestions and help a novice out.
Airsoft_Mr B Posted June 5, 2014 Posted June 5, 2014 I don't own a G&G Combat Machine myself but IIRC you can't replace the RIS unfortunately. On the other hand you should be able to replace the stock with no problem. You can just take off the original one and put your chosen stock on instead. That said you will probably have to run LiPo batteries if you aren't already since a NiMh won't be able to fit in the buffer tube. Hope this helps.
JackHG Posted June 5, 2014 Author Posted June 5, 2014 I don't own a G&G Combat Machine myself but IIRC you can't replace the RIS unfortunately. On the other hand you should be able to replace the stock with no problem. You can just take off the original one and put your chosen stock on instead. That said you will probably have to run LiPo batteries if you aren't already since a NiMh won't be able to fit in the buffer tube. Hope this helps. I was already planning on upgrading to a lipo but I'm not sure to get a 7.4 or a higher with a mofset?
TacMaster Posted June 5, 2014 Posted June 5, 2014 7.4v LiPo's fine, however you could compromise and get a 9.9v LiFe- I don't think they need a mosfet to avoid electrical arcing between trigger contacts Airsoft_Mr B 1
Recommended Posts