RedFox89 Posted July 2, 2014 Posted July 2, 2014 Hi guys, Played my first game day with my A&K M4 and I just wanted to know about cleaning the barrel for future reference. I have seen people say rubbing alcohol is good to clean with - is this product what I'm looking for? http://www.ebay.co.uk/itm/360771649160 Any suggestions, links to other products would be appreciated. Thanks!
Airsoft_Mr B Posted July 2, 2014 Posted July 2, 2014 I've been looking for some myself. I'm not entirely sure if it is the right thing, but it does say it's good for cleaning, so I don't think you could go wrong.
Supporters jcheeseright Posted July 2, 2014 Supporters Posted July 2, 2014 just use white spirit. Airsoft_Mr B 1
Supporters Sitting Duck Posted July 2, 2014 Supporters Posted July 2, 2014 or you could buy the swabs if you don't want to buy in bulk get 100 or so swabs very cheap - same 70/30 ratio in swabs - quick simple & throw away or buy 99% pure in bottle but 5ltr is cheaper option but not so easy to carry to skirmish etc... http://www.ebay.co.uk/itm/400442156564 I have bought a few of these for various use - yes you can get 100 cheaper but with these you get the brand you pay for rather than be sent any other type they have to hand
Airsoft_Mr B Posted July 2, 2014 Posted July 2, 2014 Like these? http://www.ebay.co.uk/itm/like/281195671144?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=108&ff19=0 Then I'm assuming you just wrap it around the cleaning rod? I'm thinking of using the idea of using cigarette filters and pushing them down the barrel with some white spirit or rubbing alcohol on. You can get the filters by the thousands really cheap if you want.
Supporters jcheeseright Posted July 2, 2014 Supporters Posted July 2, 2014 Why does everyone always want to reinvent the wheel!? Just stick a bit of kitchen roll in the end of the cleaning rod, soak it in white spirit and pull it through the barrel, repeat until it comes out clean. snuff 1
BrightCandle Posted July 2, 2014 Posted July 2, 2014 You can even do this with some silicon lubricant. Heck the cleaning works just with some cut up kitchen towel and no liquid at all. You don't need to get fancy about cleaning the barrel, just running some ripped up kitchen towel will more than do the job.
Supporters Sitting Duck Posted July 2, 2014 Supporters Posted July 2, 2014 I was just saying if alcohol is a MUST have for cleaning rather than buy bottles of 70/30 or 99% isoprol just get some wipes - not that expensive and less messing about can be used safely on numerous things to clean etc.... cut/tear it to size, pop in your rod - oooh ergh missus, clean barrel - throw away (no spills - no fuss & easy quick to do at half time if you like) everybody uses different stuff & methods/techniques just pointing out the swab option
Unrustle_Thine_Jimmies Posted July 2, 2014 Posted July 2, 2014 Kitchen roll can leave little chunks of stuff inside the barrel(But one or two shots to clear it won;t do any harm) but it depends on the brand of roll,one roll I use did not fall apart while another did. Cut up an old T-shirt for strips,soak it in white spirit you can buy in nearly every supermarket and you will be fine.
Supporters Sitting Duck Posted July 2, 2014 Supporters Posted July 2, 2014 Kitchen roll rarely breaks up Toilet roll does break up when wet - it is desgined to to help flushing etc.... Kitchen roll is fine - Bounty - one sheet type of thing or cheap no frills Kitchen roll should not break up one type is for ya ar$e & gets caught on ya kilngons - the other is for ya gun gun or bum - two types of roll - and no don't point ya gun up ya ar$e either Airsoft_Mr B 1
RedFox89 Posted July 2, 2014 Author Posted July 2, 2014 Crikey what have I started! Lol. Just wanted to ask as a beginner, I would like to learn more maintenance and how-to stuff to look after my weapons, rather than pay for it to be done. Although I do understand sometimes you do need a pro to look at your weapon!
Supporters Lozart Posted July 2, 2014 Supporters Posted July 2, 2014 I use napalm and a scotch brite pad. Of course... my guns screwed but it's shiny :-) Unrustle_Thine_Jimmies, clumpyedge and dex 3
Supporters Sitting Duck Posted July 2, 2014 Supporters Posted July 2, 2014 no rows - just different methods techniques & wotnot.... always good to see what & how other people do it sharing info is how we all learn - heck I have so much to learn still
Recommended Posts