ronin677 Posted July 4, 2014 Posted July 4, 2014 Hi all, I have this M16a1 VN and I believe it is a G&G model (not 100% sure though, but it strips the same as my GR16 and has markings similar to the G&G version) My lower receiver is cracked and I'm looking to replace it. Does anyone think this receiver on ebay would fit? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=291176954278 thanks guys and gals
Supporters Lozart Posted July 4, 2014 Supporters Posted July 4, 2014 Maybe. Looks pretty rough for the price though.
ronin677 Posted July 4, 2014 Author Posted July 4, 2014 Maybe. Looks pretty rough for the price though. True but I'd strip it down anyway and hope the body underneath it ok. I think I might take the chance and risk it.
Supporters Lozart Posted July 4, 2014 Supporters Posted July 4, 2014 True but I'd strip it down anyway and hope the body underneath it ok. I think I might take the chance and risk it. Dunno. The front pin hole looks a bit rounded out and the upper rear where the back end of the upper receiver sits looks quite rough. Still....it's your money
Supporters M_P Posted July 4, 2014 Supporters Posted July 4, 2014 Just a heads up, pretty sure that isn't a g&g, I dont think they do older AR15s and they tend to use fake trades. team flex 1
ronin677 Posted July 4, 2014 Author Posted July 4, 2014 Just a heads up, pretty sure that isn't a g&g, I dont think they do older AR15s and they tend to use fake trades. Gonna sound ignorant now but what do you mean by 'fake trades'? Does that mean you doubt it will fit a G&G upper?
Mr Monkey Nuts Posted July 4, 2014 Posted July 4, 2014 Fake trades, as in copying a trade mark or brand when it's a reproduction or copy.
Supporters M_P Posted July 4, 2014 Supporters Posted July 4, 2014 I mean most companies will replicate the trademarks from real guns, whereas g&g use their own made up stuff which judging by your current lower would suggest that it's not a g&g/
ronin677 Posted July 4, 2014 Author Posted July 4, 2014 I mean most companies will replicate the trademarks from real guns, whereas g&g use their own made up stuff which judging by your current lower would suggest that it's not a g&g/ Yep I think your right. I think it is in fact a G&P
ronin677 Posted July 4, 2014 Author Posted July 4, 2014 I suspect now this won't fit due to the tube sticking out of the G&P lower receiver. This ebay one doesn't have that
straffham Posted July 4, 2014 Posted July 4, 2014 Yeah yours is a G&P (well the receiver is at least - its identical to one I have, down to the same serial no.). The ebay one won't suit and I wouldn't touch it tbh, looking close at the image it looks to me like the top at the back has been damaged (or even broken & repaired), and (being as its not threaded for a screw in stock tube,) the tubular extension which holds the stock tube has broken / been cut off, hence the back edge looks rough as others have said, where it should be flat, so there is nothing to keep the stock in place. Looks like a bad repaint too. Better to get a new clone M4 upper & lower for around £40 from likes of Airsoftworld, Actionhobbies etc, or another G&P (albeit £100+) from Firesupport to keep its original Vietnam looks possibly?
ronin677 Posted July 4, 2014 Author Posted July 4, 2014 decided to stay well clear of this one Lozart and Airsoft_Mr B 2
ronin677 Posted July 5, 2014 Author Posted July 5, 2014 lol I am still on the hunt for a lower receiver. Found this on and it really does look almost identical to mine. Do you all think this could be compatible with my G&P upper receiver?
Supporters jcheeseright Posted July 5, 2014 Supporters Posted July 5, 2014 while not cheap, any receiver on this page will fit:http://shop.ehobbyasia.com/accessories/metal-body/aeg-metal-body/index.html?manufacturer=319 you'll have to buy the upper too though, I don't think you'll get a new G&P lower on it's own. ronin677 1
straffham Posted July 5, 2014 Posted July 5, 2014 Depends how fussed you are on appearance really, if you put an M4 receiver on it you will lose the iconic Vietnam old school look and end up with something of a hybrid, so may be worth searching out a G&P M16vn or M16A1 lower?
ronin677 Posted July 8, 2014 Author Posted July 8, 2014 Hi guys, sorry to keep this thread going but just found this and as its a G&P i'm trying to fix, will this lower receiver work? http://www.ebay.co.uk/itm/271542884704?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 cheers again
Supporters jcheeseright Posted July 8, 2014 Supporters Posted July 8, 2014 nope, CYMA are TM clones, it'll be off-spec for a G&P.
straffham Posted July 8, 2014 Posted July 8, 2014 Prob have to use the upper that comes with it as tolerences may be different to G & P.
Recommended Posts