Cashisback Posted September 20, 2014 Posted September 20, 2014 Hello, I have a CM16 R8-l. Is there anyway of taking the delta ring off? It's the part between the hand guard and the upper receiver. I've looked at tutorials but they all decribe how to take the round one off but the certain one I have is different to everything else. Any ideas?
n1ckh Posted September 20, 2014 Posted September 20, 2014 Have you tried a hammer and flat head screw driver ?? I think with those, you knock it anti clockwise to undo it
Supporters Lozart Posted September 22, 2014 Supporters Posted September 22, 2014 Have a look at these: Cashisback 1
Cashisback Posted September 22, 2014 Author Posted September 22, 2014 https://www.dropbox.com/s/c9k9jhn19bqmhhn/2014-09-22%2011.47.49.jpg?dl=0 https://www.dropbox.com/s/dk9oyojmrjug98d/2014-09-22%2011.48.05.jpg?dl=0 Mine looks like this and seems to be completely different though
Supporters Lozart Posted September 22, 2014 Supporters Posted September 22, 2014 https://www.dropbox.com/s/c9k9jhn19bqmhhn/2014-09-22%2011.47.49.jpg?dl=0 https://www.dropbox.com/s/dk9oyojmrjug98d/2014-09-22%2011.48.05.jpg?dl=0 Mine looks like this and seems to be completely different though You need to undo the hex headed bolts to split the outer ring. It's the same as the one in the first video.
Cashisback Posted September 22, 2014 Author Posted September 22, 2014 You need to undo the hex headed bolts to split the outer ring. It's the same as the one in the first video. https://www.dropbox.com/sc/6gkfxjki5yrwvwp/AAAB3zp1O3NXTKvAhnDLRIGwa Already tried that. They seem to only be there for looks. There's no other screws that can be undone. Do i need some kind of key?
Supporters Lozart Posted September 22, 2014 Supporters Posted September 22, 2014 https://www.dropbox.com/sc/6gkfxjki5yrwvwp/AAAB3zp1O3NXTKvAhnDLRIGwa Already tried that. They seem to only be there for looks. There's no other screws that can be undone. Do i need some kind of key? The two screws bottom left and bottom right - are you saying you can't get them out with an allen key?
Cashisback Posted September 22, 2014 Author Posted September 22, 2014 Yep that's the first thing I tried. They're not screws, they're just fake.
Supporters Lozart Posted September 22, 2014 Supporters Posted September 22, 2014 Yep that's the first thing I tried. They're not screws, they're just fake. OK. Looking down into the ring, there seems to be a couple of indents that might be registration points for a two pronged spanner (a bit like a tap fitting spanner if you've seen one of those). If you put a screwdriver in at an angle and hit it with a hammer does that rotate the inner black ring?
Supporters Lozart Posted September 22, 2014 Supporters Posted September 22, 2014 Right - solution found! You need either this tool: Or a pair of needle nosed pliers. Have a look here for an explanation (around post #16) http://www.airsoftsociety.com/forums/f10/g-g-cm16-r8-l-93854/index2.html Cashisback 1
Cashisback Posted September 22, 2014 Author Posted September 22, 2014 Right - solution found! You need either this tool: Or a pair of needle nosed pliers. Have a look here for an explanation (around post #16) http://www.airsoftsociety.com/forums/f10/g-g-cm16-r8-l-93854/index2.html Ahh brilliant yes, just used my pliers and managed to unscrew the black thing. Perfect. Thank you very much for your help Lozart and team flex 2
GingerBreadMan Posted September 22, 2014 Posted September 22, 2014 Right - solution found! You need either this tool: Or a pair of needle nosed pliers. Have a look here for an explanation (around post #16) http://www.airsoftsociety.com/forums/f10/g-g-cm16-r8-l-93854/index2.html YES! Thank you lozart, I've looked for a solution for ages, the system is the same for the cm18 Lozart 1
Recommended Posts