Hef Legend Posted January 21, 2015 Posted January 21, 2015 Is there is anyone on here who would be able to tap my m700 mags? I'm going to need 2 done,one long mag and one short mag. Happy to pay a reasonable price.
Supporters Qlimax Posted January 21, 2015 Supporters Posted January 21, 2015 Is there is anyone on here who would be able to tap my m700 mags? I'm going to need 2 done,one long mag and one short mag. Happy to pay a reasonable price. Dark Talon a member on here he's on my friends list. Mark is your man he can do it no problem.
Supporters Qlimax Posted January 21, 2015 Supporters Posted January 21, 2015 Click the Facebook link in my Signature that'll take you where you need Airsoft_Mr B 1
Hef Legend Posted January 21, 2015 Author Posted January 21, 2015 Cheers buddy, I've sent him a message Qlimax 1
Guest PT247 Posted January 21, 2015 Posted January 21, 2015 If you can get to Crawley I can point you at a company that did my M700 bits for me (is currently doing some other HPA bits for me too). Didn't cost much.
Guest PT247 Posted January 21, 2015 Posted January 21, 2015 also Palmer Pursuit sell a plug and play hpa kit for the M700 large mags: http://co2reg.com/index.php/tanaka-kjw-m700-constant-air-adapter-for-extended-clips.html
moonmoose Posted March 10, 2015 Posted March 10, 2015 PT24 Could you point me in the direction? Looking for some hpa we m4 mags if thats their fortay?
Guest PT247 Posted March 10, 2015 Posted March 10, 2015 if you just want a real-cap tapped for HPA do it yourself mate. If you want a hi-cap then the only company I know that sells them is Alyan Airsoft: http://www.alyanairsoft.com/products-services Or you could do what I have with my GHK G5 and build your own.
moonmoose Posted March 11, 2015 Posted March 11, 2015 I have looked alot into doing it myself. And i was just after the real cap tapped. use to paintball so have the air tanks and remote coil so on. But out of curiosity how did you go about yours? Is it as simple as installing a q/d air nozzle into the mag and a regulator off a bottle to control psi?
Guest PT247 Posted March 11, 2015 Posted March 11, 2015 My G5 mags are in the DIY thread: http://www.airsoft-forums.co.uk/index.php/topic/18511-diy/?p=185053 http://www.airsoft-forums.co.uk/index.php/topic/18511-diy/?p=186131 If you just want to tap a WE mag then the easiest solution (if they fit) is to remove the gas fill valve off the bottom and fit a CQB Russian to each of your gas mags. Downside is it is prone to damage when you go prone and will raise your profile: http://www.grangeairsoft.com/cqb-russia-hpa-adapter-for-we-and-compatable-magazines/dp/1477 If you are happy with using taps then you could put it at the rear of the mag rather in the fill valve hole but I have no experience with converting WE mags to HPA yet. Personally I think hi-cap mags with HPA are far better for practicality but can have feed issues. Alyan Airsoft have this hi-cap for WE GBBRs you can buy already made: http://www.alyanairsoft.com/products-services. Would be around £100 I imagine with shipping but when you add up enough of the CQB Russian connectors to give you enough mags to skirmish (guess around 7 mags) you are looking at the same price but can only carry 210 BBs in 7 heavy mags, the Alyan M4 mag holds 300 BBs for the same money! I ordered pretty much all my components from Palmers Pursuit in the USA as I can get free shipping through a mate that has hold space on a plane.
Recommended Posts