Supporters Lozart Posted February 13, 2015 Supporters Posted February 13, 2015 Right - I recently messed about with my SCAR L (fitted a BTC Spectre which works fine by the way) and while it was apart the nozzle looked like it could possibly do with replacing. Having skirmished it last weekend the FPS was down and sometime I would get BBs just fall out of the barrel or double feed or sometimes not feed at all so I'm thinking there may be an issue with the nozzle/hop rubber. Problem is that there seems to be a bit of conflicting info on t'web about what nozzle it actually takes. The G&G website doesn't even list the SCAR as a model they make (never has done). I've emailed them but...well it seems to take forever for anyone to reply from China so I'm asking here. Does anyone have any DIRECT experience of replacing the nozzle in one of these? I don't really need any more "I've heard it's the same as xxx" unless you can back it up with some form of evidence. I really don't want to end up with completely the wrong nozzle just because someone heard that a mates brothers uncles one uses the same as an SR25.
Supporters Sitting Duck Posted February 13, 2015 Supporters Posted February 13, 2015 No but my m8 Nobby down the pub, knows some guy who.............. Measure the old one coz there quite a few variations out there some seem "similar" to M4's - pah that's a joke M4's can be anywhere from 21mm to 22.5mm seriously some reports say long bastid mofo's about 29mm http://www.fire-support.co.uk/product/classic-army-bore-up-air-nozzle-for-scar-series but the proper G&G one don't look nothing like a longer nose 29mm type: http://www.fire-support.co.uk/product/gg-jet-nozzle-air-nozzle-for-gg-scar the above mofo don't look very long to me.... G36's & SR25's are a touch longer than M4's - getting to 24mm APROX !!!! so really can't help ya with EXACT TRUE DEFFO I HAVE DONE THAT example if ya measure the old G&G nozzle then some of us might be able to search/hunt or even check what "might" be near that (G&G - ain't they in Taiwan not China btw - but same meat different gravy)
Supporters Lozart Posted February 14, 2015 Author Supporters Posted February 14, 2015 Taiwan is part of China. I had thought to measure it but that does require taking the whole thing apart again. The SCAR H definitely takes a longer nozzle and the Classic Army and d Boys one are different again. Hence the question.
Supporters Lozart Posted February 14, 2015 Author Supporters Posted February 14, 2015 The other reason for wanting to know the right size nozzle is to find out if I'm limited to oem parts or if (in the event of an m4 nozzle fitting) I can fit a nice o ring seal nozzle.
Supporters Sitting Duck Posted February 14, 2015 Supporters Posted February 14, 2015 Taiwan is part of China. I had thought to measure it but that does require taking the whole thing apart again. The SCAR H definitely takes a longer nozzle and the Classic Army and d Boys one are different again. Hence the question. OK - serious suggestion but how about giving Fire-Support a ring and asking them very very very nicely if they can measure the G&G one ??? (will save ya buying a genuine one & measuring it or take box apart again) Only going by pics but deffo don't look like D Boys 29mm, They (G&G) may have decided to build it all around their convential M4 stock of parts, unsure what other non-M4 models may be using though but could kinda make sense however here is a ROUGH list of nozzles and their range of lengths (say rough range coz it really really can vary a bit as you already know) AK's 19.6mm to 20.7mm (short or long versions but these nozzles can really vary) MP5 20mm to 21mm - no step or ridge P90 20mm to 21mm - no step or ridge M4's 21mm to 22mm to just under 22.5mm M14 23mm - no step or ridge SR25 23mm to 24mm G36 24mm - no step or ridge AUG 25mm SCAR Boyi - 29.15mm SHS Red M4 nozzle - there are at least 2 types One has 1 x O-ring and other has a double or 2 x O-rings (both are nigh on exact same size when put side by side but slightly different ending at nozzle tip) NB - is really only a very very rough guide I threw together and that is taking the description's specs (which can be way out anyway - so don't flame if I'm talking out my ar$e once more but just a start) Lozart 1
Supporters Lozart Posted February 14, 2015 Author Supporters Posted February 14, 2015 Yeah good idea might just drop fs a line. Cheers for all that info man, for someone that claims to be a clueless noob you certainly know where to find the details. Sitting Duck 1
Supporters Lozart Posted February 16, 2015 Author Supporters Posted February 16, 2015 I got a reply from G&G! Apparently the correct length is 21.1mm.
Supporters Sitting Duck Posted February 16, 2015 Supporters Posted February 16, 2015 oooopsie for double post anyway updated my own list on pc with Lozart's actual Lonex list bound to a good thing to check/measure stuff against.... Can see now the importance of getting right or near as damn it coz they really can vary a bit & possible to lose a good seal/feeding many thanks for info sir
Supporters Sitting Duck Posted February 16, 2015 Supporters Posted February 16, 2015 cool - so "probably" a standard M4 or M4-ish one around that size could work the "rough" chart didn't take long and could come in handy as ref point to check/update against well I'm keeping it to hand, and you can have a little measure up on M4 type nozzles now love G&G
Supporters Sitting Duck Posted February 16, 2015 Supporters Posted February 16, 2015 cool - so "probably" a standard M4 or M4-ish one around that size could work the "rough" chart didn't take long and could come in handy as ref point to check/update against well I'm keeping it to hand, and you can have a little measure up on M4 type nozzles now seen shs red M4 as being 21.47mm in descriptions if that is worth much love G&G Lozart 1
Supporters Lozart Posted February 16, 2015 Author Supporters Posted February 16, 2015 cool - so "probably" a standard M4 or M4-ish one around that size could work the "rough" chart didn't take long and could come in handy as ref point to check/update against well I'm keeping it to hand, and you can have a little measure up on M4 type nozzles now seen shs red M4 as being 21.47mm in descriptions if that is worth much love G&G Yeah I'm thinking of going for a Lonex one: 19.63mm - AK Series 20.40mm - MP5-A4/A5/SD5/SD6 Series 20.73mm - P90 Series 20.77mm - M16A1 VN/XM177E2/CAR-15 Series 20.96mm - LMG Series 21.05mm - MP5-K/PDW Series 21.13mm - PSG-1 Series 21.20mm - G3-A3/A4/SG-1/MC51 Series 21.22mm - M16A2/M4A1/SR16 Series 22.26mm - SIG 550/551/552 Series 24.27mm - G36 Series 24.60mm - AUG Series 24.61mm - M14 Series as it seems to be a bit closer. Sitting Duck 1
Supporters Shizbazki Posted February 20, 2015 Supporters Posted February 20, 2015 Taiwan is part of China. Not related to the post but Taiwan (AKA The Republic of China) is a completely separate country to The Peoples Republic of China, it like Saying that North Korea and South Korea are both the same country and we all know the MASSIVE difference between those two. Differences between the two are: Taiwan is a fully democratic state where its people elect a president, prime minster etc from a number of democratic parties (a bit like here in the UK) China is a single party Communist state where its leaders are elected by a select number of Party members The Peoples Republic of China in it current form was created under the leadership of Mao Zedong (backed by Communist Russia) The Republic of China in its current form was created by General Chiang Kai Shek of the Kuomintang (Back the US of A) The Peoples Republic of China passport is RED with the main govt building as the logo The Republic of China passport is Green. In the UK people from The Peoples Republic of China who visit to study or work with the correct visa must register themselves with their local police force and must notify their local force if they move home or residence. In the UK people from The Republic of China who visit to study or work withe the correct visa don't have to register themselves with the police and are free to move about the UK. Technically Taiwan and PRC are still at war as no peace agreement or treaty was ever signed, like the argument between North and South Korea. Anyways more to the point about SCAR - L Air nozzles lol I found on my friends WE SCAR - L which uses a V2 gearbox to use just a normal nozzle, though i know that G&G sometimes uses a propriety nozzles just for giggles as my G&G MP5 had a different nozzle length from a standard TM nozzle. Lozart 1
Supporters Lozart Posted February 20, 2015 Author Supporters Posted February 20, 2015 Regards to the nozzle I've had a response from G&G (see post previous to yours) and they've confirmed that it's 21.1 mm which puts it into "probably an M4" range. I'm going to give one of the Lonex air seal ones a try and if that doesn't work I'll just splash out on a proper G&G one. As for Taiwan....well, it depends on who you ask. Yes, Taiwan is a sovereign state with its own government (Republic of China) but Taiwan says that the Peoples Republic of China is theirs and that the communist government is having a bit of a laugh, Beijing on the other hand says they own Taiwan (they claim it's their 23rd province) and that THEY have dominion over all of China. The nub of it is that they no longer have membership of the UN and indeed are not recognised by the UN and are widely unrecognised by other countries. There's still nations that maintain diplomatic relationships with the ROC but not everyone. They're kind of the Far East version of Scotland really. Atro 1
Atro Posted February 24, 2015 Posted February 24, 2015 Hey mate I have a G&G scar my self and im currently going through the process of upgrading it. As Im also interested in purchasing a lonex air seal, can you please tell if you went ahead with the instalation and which one worked for you? Many thanks Lozart 1
Supporters Lozart Posted February 24, 2015 Author Supporters Posted February 24, 2015 Not done it yet but as and when I'll post an update (far too many other guns need fixing first - mostly other peoples!)
Atro Posted February 24, 2015 Posted February 24, 2015 Thanks mate, I let you know if i go for it first Lozart 1
Recommended Posts