LazzurusMan Posted February 21, 2015 Posted February 21, 2015 So I bought a second hand cm16 the other day, and she doesn't seem to feed right. The first few rounds won't fire, and when I take the mag out about 5 bbs will fall out the mag well. Is this a common problem? I'm thinking it might berthed mag as the other pmag I got didn't have this problem, only the last two or three wouldn't feed.
Hudson Posted February 21, 2015 Posted February 21, 2015 What ammo are you using? And having a few bbs fall out when you remove the mag is perfectly normal with AEGs.
Supporters Sitting Duck Posted February 21, 2015 Supporters Posted February 21, 2015 think you kinda answered your own question there..... 1 mag feeds - other one don't could try a little bit of felt/tape/velcro in magwell but could be a w@nked old mag with crap spring happens a bit - always remove bb's & empty mag when done for the day and I'm sure peeps have got some really nice great mags that feed lovely in their guns plus a few that don't on occasions those iffy mags may feed better in some other guns but not others could try other bb's & tape in magwell but quite likely mag is a bit borked - for that gun anyway (probably spring is worn & not supplying enough pressure to feed bb's very well) main thing is gun ok - mags are easy/cheap to replace I got some mid-caps and some hi-caps that are not so great at feeding, some are ok then crap after halfway mid-caps and some hi-caps that feeds about 5 or 6 bb's then need loads of winding (really need to either see if I can fit new spring/stretch it a bit but most likely should just bin most of them)
LazzurusMan Posted February 21, 2015 Author Posted February 21, 2015 There was velcro in the mag well when I got it
Airsoft_Mr B Posted February 21, 2015 Posted February 21, 2015 Problem with the mag, thankfully nowt wrong with the gun itself. Yep rounds always fall out, normal with standard AEGs, unless you buy magazines with extended follower things (although not all will work - RM4 ones only work with the RM4 for example) or certain hop up units.
Supporters Lozart Posted February 21, 2015 Supporters Posted February 21, 2015 There was velcro in the mag well when I got it That says to me that the previous owner had the same issue.
LazzurusMan Posted February 21, 2015 Author Posted February 21, 2015 Also the mags only stay in if I give them a slap, so I'm guessing I need to find some better ones, probably proper g&g hi caps Lozart 1
Albiscuit Posted February 24, 2015 Posted February 24, 2015 Some mags work better than others, I ended up with 16 mid caps and only 6 work properly Tend to use the high cap which came with the gun tho
Recommended Posts