Shortenhauzen Posted March 20, 2015 Posted March 20, 2015 Recently purchased one of the above ( second hand ) with 2 x Co2 mags , Fires nicely although i have had buggered up one mag but that's another story !! Anyway decided to buy 2 x Green Gas mags for it so i have the option to run it on both depending on the scenario . Ordered the mags from Taiwangun.com and they arrived today with no probs. Filled the mags with gas ( WE green gas ) and BB's and proceeded to fire the pistol. 1st mag would only cycle the slide a few shots then would need to re cock the slide , Towards the end of the mag it ran about 10 shots fine . 2nd mag never fired a BB ?? refilled it again but didn't any go in so reloaded in pistol , still nothing !!! Cut a long story short one mag will fire IF i pull the bottom of the mag towards me ? 2nd mag i can't do much with think i fired 2 BB's with it . Any idea's people ? I have searched the net for info but not found much apart from a forum which showed some one with a nut glued on the valve ( knock ) to make it work ???? Is something worn ie the part which hit's the knock valve ? I have tapped the valves with an allen key and the gas escapes fine. I have also reused the co2 mag and that works fine . Thanks in advance Barry
Shortenhauzen Posted March 20, 2015 Author Posted March 20, 2015 And forgot to mention this is supposed to run on both propellent's
Recommended Posts