uniweekendwarrior Posted April 4, 2015 Posted April 4, 2015 Hi, new to the world of electric aeg's. My g&g mp5 shoots left, no its not just me I've had friends test it.I've taken then motor out to check the barrel for obstructions, nothing. Anyone help? Thanks
Josh95 Posted April 4, 2015 Posted April 4, 2015 this may sound silly, but when you shoot it do you tilt the gun at all? if the gun is slightly tilted the bb will curve off, make sure when you shoot the gun is positioned in a vertically even stature.
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 I'm pretty sure it's straight like I said had a few people fire it with the same results.
Supporters sp00n Posted April 4, 2015 Supporters Posted April 4, 2015 Check the barrel to hop alignment, some times the barrel can slightly rotate in the hop, meaning the hop puts pressure on one side of the bb meaning the bb will shoot to one side or another etc Sitting Duck 1
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Sorry I don't quite understand, how does the barrel rotate I have it infront of me now
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Well the inner barrel slide out and do did a copper looking metal ring
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Actually looking at what I think is the nozzle looks deformed
Supporters sp00n Posted April 4, 2015 Supporters Posted April 4, 2015 Don't loose the copper ring, it keeps the barrel central in the hop. Look down the hop into the barrel, the hop nub should be central, if it's not gentility rotate the barrel slightly Sitting Duck 1
Supporters sp00n Posted April 4, 2015 Supporters Posted April 4, 2015 Is the barrel straight? Any chance of a pic of the nozzle?
Supporters sp00n Posted April 4, 2015 Supporters Posted April 4, 2015 Dosnt look too bad from the pic Just had a thought, Is the barrel clean?
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Do you think it would be worth changing the nozzle?
Supporters Sitting Duck Posted April 4, 2015 Supporters Posted April 4, 2015 stabbing in dark a bit coz I'm no expert....... need to check barrel as that "could" be scratched hop could be iffy and need attention/replacing nozzle could not be sealing correctly and in line properly 101% this is quite rare as G&G's are normally pretty damn good - was this new btw if so speak to the retialer but don't go nutz opening her up much further it "could" be a bad port or volume ratio on cylinder - curving is a possible symptom of over volume eg: a full or fullish cylinder used for a shorter than usual barrel what actual model or how long is the mp5 and its inner barrel ? and did you get it s/hand or new - speak to retailer like I said if its shooting that pi$$ed
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Got it second hand and your more of an expert then me don't know what half that ment and it's a PM5A4 I think fixed stock.
Supporters Sitting Duck Posted April 4, 2015 Supporters Posted April 4, 2015 http://i54.tinypic.com/2aietl3.jpg ahhh - the port is one the gearbox's cylinder now if somebody has overhauled it they could of fitted a full cylinder instead of a correct ported cylinder Now I ain't saying it is this but now we know its s/hand so it could be what the previous owner f*cked up or was crap so they flogged it so to speak Just coz you can't see the port it could be other side or even hidden underneath just saying with a bad port all sorts of weird stuff can happen BUT it may very well be numerous other things - but might be worth checking if your cylinder port looks like that pic one if it is that is one thing to rule out - if you can't see the hole in cylinder you might be able to rotate it and see if it is underneath/other side etc.... if it has the port for say 275 barrel - guessing the length btw then it can then be ruled out and look towards barrel/hop etc.... and I'm just making this up as i go along
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 What part is the port and what part is the cylinder In the pipicture? I'm aware this is probably a newb question.
Supporters Sitting Duck Posted April 4, 2015 Supporters Posted April 4, 2015 brass tube is cylinder port is the slotted hole in the brassy looking tubey thingymajig aka cylinder
Supporters Lozart Posted April 4, 2015 Supporters Posted April 4, 2015 Take it to a shop/tech. Without wanting to be rude you sound like you don't know enough to not screw it up completely. But to be honest it's either a bent barrel or the hop/rubber/barrel are misaligned. Sitting Duck, sp00n and Mack 3
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Yea pistols are easy but thus is a challenge but I want to learn so I won't mess with it just try to understand what is wrong and how to fix it and btw sitting duck love the explanation haha worked though
uniweekendwarrior Posted April 4, 2015 Author Posted April 4, 2015 Sitting duck I think I finally understand, there isn't any ports on the side of the cylinder how easy is it to strip to check for hidden ports
Supporters Sitting Duck Posted April 4, 2015 Supporters Posted April 4, 2015 the guy talks a lot of sense I have broke plenty and only have a tiny scrape of wisdom a pro should be able to diagnose and fix it quickly and a quick service probably breaking cheapo guns is ok - bolloxing a decent G&G is a tragic shame you don't wanna do
Recommended Posts