Robbi3b Posted April 5, 2015 Posted April 5, 2015 Hi I have a second hand m4 unsure of the make, the previous owner was kind enough to damage the outer barrel (see pictures) is there any hope for it or do I need a new one, if a new one is needed how do i go about sorting out a new one many thanks
Guest PT247 Posted April 5, 2015 Posted April 5, 2015 could try re-cutting the thread, will be a 14mm ccw, not sure on the gauge though
Spatch Posted April 5, 2015 Posted April 5, 2015 Typical Chinese metal thread, looking at your picture I doubt it would re cut sufficiently and the die you need is 14mm negative x 1 which are fairly expensive, cheaper and easier to pick up another outer barrel
Robbi3b Posted April 5, 2015 Author Posted April 5, 2015 Ok guys many thanks will any outer barrel fit or do I need a specific one
Supporters Sitting Duck Posted April 5, 2015 Supporters Posted April 5, 2015 They are quite cheap from china - yeah must be ultra high quality look on fleabay for "14mm die left" - it should be 1mm pitch However though 14mm ccw is the norm there are still the odd one Army R85 a clone of G&G's L85 has a normal clockwise thread to be honest you might be better off just glue something on there for now some cheapo plastic flash or a bit of black pipe/tube M4a1 will need the front sight pins knocked out and some hand guard sizes vary to not all have true exact 7 inch hand guards so more modification could be needed even if you buy a complete outer barrel - try to make sure it is from same make/model to be sure TM compatible can translate to "kind of" TM compatible if the gun is a decent make you could look at it as an ideal time to change front end to a rail system but if a M4a1 with battery up front then peq or rewire for rear battery may be needed If it was a £100 or so gun I think I'd just see if I could glue on with epoxy/araldite something to tidy it up and see how it goes for now whilst I rethink my options plenty of crappy cheapo guns have just glued on flash hiders - so you could throw something together maybe make something like a bespoke silencer at the end - soz not very good at Blue Peter & washing up bottle top stuff if it is a more higher end gun then have a think about how far you want to go but could still plop something on there for now - it don't do much anyway (looks mainly and maybe produces a slightly different sound) hard to tell but guessing a m4a1 with a 275-300mm inner barrel as the end and front sight is close together so if that is about correct you don't really want a longer 363 m4a1 outer barrel
Robbi3b Posted April 5, 2015 Author Posted April 5, 2015 Sitting duck I have this at the moment it fits on but I was trying to get a silencer,
Supporters Sitting Duck Posted April 5, 2015 Supporters Posted April 5, 2015 What gun is it ??? hard to tell coz thread is chewed up but it "could" be clockwise on there try to stare and watch how the spiral thread climbs - so to speak but I'd be f*cked if I can clearly see it is so mashed up try wrapping a bit of plumbing ptfe tape round threads and it might bite but any flash will be bollox'd that you put on there in the end but the tape & bit of glue could help it stay put see you got some kind of RIS so you probably rear wired Airsoft_Mr B 1
Robbi3b Posted April 5, 2015 Author Posted April 5, 2015 It's an m4, Yeah rear wired, don't know the make of it the flash hider does fit and grip on to what's left of the threads imo that's probably what fucked it up on the first place I believe it might be cw thread
Supporters Sitting Duck Posted April 5, 2015 Supporters Posted April 5, 2015 coz it is hard to tell if ccw or cw and it looks nigh on boned I'd glue/tape wedge on what ya can for now and just go with it keep your eyes open but we dunno the exact make or high quality it is by that I mean it could be say a modest gun and if so it might not be worth going too mad on time/money you could replace outer barrel but think oh I will put on another longer RIS - before you know where you are you may as well perhaps bought another RIS type M4 and kept this as backup/spare or sell it (declaring the moody flash of course if you have integrity) see how it goes, keep eye out for something cheap front end and kind of live with it is my gut feeling
n1ckh Posted April 5, 2015 Posted April 5, 2015 Take a picture of the whole rifle & any markings aswell as that may help Have you split the upper & lower body by pushing the pins out ?? If it has a split gearbox (all the gears in the bottom) that could narrow it down to an ICS M4 BUT if you have to pull the lower body back then it could narrow it down to G&G, G&P or TM (Tokyo marui) etc Sometimes the overlooked will give it away Sitting Duck 1
Supporters Sitting Duck Posted April 5, 2015 Supporters Posted April 5, 2015 ooooh its like them picture guessing games... you know you see a tiny bit, then a little bit more, then it zooms out some more 1st one to buzz in correctly wins a prize - yayyyyyyyy oh the prize is the old f*cked flash hider Robbi3b and n1ckh 2
Robbi3b Posted April 5, 2015 Author Posted April 5, 2015 I'll take some pics of it when I get back in
n1ckh Posted April 5, 2015 Posted April 5, 2015 I'm guessing its a CM16 ?? Or an ICS ?? Them threads is well fooked lol Problem with re-cutting them (besides not enough material) is they'll be to small for a new flash hider
Robbi3b Posted April 5, 2015 Author Posted April 5, 2015 The others pics I took are to large to upload
Supporters Sitting Duck Posted April 5, 2015 Supporters Posted April 5, 2015 Guessing it is maybe an ASG Armalite but seems like a few other bits or upgrades added at some point Anyway looks all metal and not a JBBG - bit battleworn but if she shoots ok then that is what matters 1 careful owner (plus 3 other very bad owners too) glue it on, maybe look out for a 10 or 11 inch outer barrel, flash/suppressor & add front flip sight etc.... just glue it on and see what good little deals you can find EDIT - nope not ASG hard to figure out but gonna go with ARES http://www.airsoftmegastore.com/1845-elite-force-ares-airsoft-m4-cqb-aeg-rifle-full-metal-rail-system.aspx similar perhaps ????
Recommended Posts