uniweekendwarrior Posted April 16, 2015 Posted April 16, 2015 Hi all, I just got a new barrel for my we g18c gen 4 and a new hop rubber but i am having some issues. https://youtu.be/Yp4lIg9AaZk Please if you can help let me know. Thanks in advance
TheGrover Posted April 16, 2015 Posted April 16, 2015 ok, troubleshooting mode; Start at the stupidly simple and work towards the stupidly complex: Is the hop up turned on? Can it be turned up any more to rectify the problem? Is the nub/arm seated correctly on the hop up? if you apply the hop and look down the barrel, does the rubber appear to be level in the barrel without any twists or bumps? Is the tape modification fouling the movement of the Hop up parts? is there a difference between the two hop rubbers? are the mounds about the same size? and thats it for now, with a bit more info im sure i can think of a few more
uniweekendwarrior Posted April 16, 2015 Author Posted April 16, 2015 As far as I can see the tape didn't foul anything. I did ensure when I put it on it was past the rubber so it was only around the barrel so it fit better in the hop up housing. I'm not sure about the arm as does it sit in the wheel or above it? It fits better in but when I took it apart it just all fell out. When the rubber is on its all smooth from end to end. The rubbers are different slightly the mound (if it's the bit that sticks out the side) is a rectangle on the standard and the new one is a bit shorter but still fits perfectly in the slot.
uniweekendwarrior Posted April 16, 2015 Author Posted April 16, 2015 Really? Landwarrior said it does.
Mack Posted April 16, 2015 Posted April 16, 2015 Get on to Landwarrior and get a refund. Those madbull barrels are for KSC Glocks, not WE/TM. http://forums.zeroin.co.uk/showthread.php?112208-Hop-bucking-compatability-with-madbull-6-03-tightbore-barrel http://www.airsoftrange.co.uk/black-python-603mm-tight-bore-barrel-for-ksc-g17g18-madbull-1346-p.asp http://sportsequipment.healthybe.uk/product/madbull-g17-g18-6-03-tightbore-barrel-airsoft-green-gas/b00j3umjxo/9df/ http://shop.ehobbyasia.com/madbull-6-03mm-black-python-tight-bore-barrel-for-ksc-g17-g18-gbb.html#.VS_2OpOVD5M
uniweekendwarrior Posted April 16, 2015 Author Posted April 16, 2015 Yea I looked around half sites say yes other half say no going to ring them tomorrow.
uniweekendwarrior Posted April 17, 2015 Author Posted April 17, 2015 Ok so Landwarrior are refunding me, anyone know what barrel will actually fit?
BrightCandle Posted April 17, 2015 Posted April 17, 2015 I have had nothing but issues getting replacement parts of my We pistol, been waiting 2+ months for a replacement hop unit (which will presumably also be total garbage). Anyhow I suspect Ed might have replaced his inner barrel on his We Glcok 17. Check out the bullet4Myenemy youtube channel and specifically his glock 17 review. He might mention an inner barrel replacement in it, I can't remember if he did or didn't replace it but I have a vague recollection he did so he will likely say the brand and such there.
uniweekendwarrior Posted April 21, 2015 Author Posted April 21, 2015 I found the video and watched it but he said he stayed with the standard barrel as the upgraded barrel wasn't to effective. I have brought a new barrel, a maple leafe one but again same problem with the bb just falling out the barrel when the slide comes forward. Starting to get pretty f***ing annoyed with it.
Mr Monkey Nuts Posted April 24, 2015 Posted April 24, 2015 Other than boost your FPS ever so slightly, (maybe 5 to 10fps tops,) it will make zero difference to your accuracy. The most inaccurate part of a pistol is the user. If yours still think you need a new barrel it will take any standard aeg style barrel IIRC it's 95mm a lot of the Chinese shops have some. Try wgc. The bb rolling out is because the hop up isn't gripping it, make sure the adjustment arm little lever is in the right slot, not the tapered one, the other one.
Recommended Posts