Clovisspike Posted June 4, 2015 Posted June 4, 2015 Hi all, I don't post very often, well at all if I'm honest, however I found a very cheap way to make a chest sling for a p90 aeg. If like others you are having difficulty in locating one or if you nave found one, such as from the vest guy, which costs a fortune this cheap way will save you those precious pennies so you can by more airsoft stuff. Basically I bought a go pro chest camera mount from Amazon for the massive price of £5.74 ?, added a connector clip to the P90 and the chest plate and away you go, a perfectly fitting chest mount for a fraction of the cost of an "actual" mount. I've attached the link for your ease and even left a review on Amazon as I was that impressed. http://www.amazon.co.uk/gp/product/B00ECU4H30?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 The only extra bits are a couple of clips, one for the chest plate and the other for the rear of the p90 and a bit of strapping which I took off an old backpack and job done. Hope this helps guys. Sacarathe and Colonel Kurtz 2
Sacarathe Posted June 4, 2015 Posted June 4, 2015 Ingenious - How much stress testing have you done, (I notice you commented it on the strength)? That after market (as i am sure you know, not gopro branded) harness was most likely designed for a GoPro's weigh at around 150-200grams, a kitted and loaded p90, 2.2kg to over 3kg... I'll give this a go if I ever get a p90.
Colonel Kurtz Posted June 4, 2015 Posted June 4, 2015 I have a P90 and a go-pro so think I'll def give this a go. Nice one, my compliments to the chef!
Clovisspike Posted June 4, 2015 Author Posted June 4, 2015 As to testing I simple attached the P90 and kind of swung it around a bit ( over soft cushions mind). Seriously I have tested this on a few skirmishes with no problem whatsoever. Sacarathe 1
Recommended Posts