Unrustle_Thine_Jimmies Posted June 20, 2015 Posted June 20, 2015 Since you have the CYMA I'd recommend doing basic reliability mods first,mainly compression since you want good range. Do note that range upgrades and accuracy upgrades go hand in hand,unless we're talking about how far you can overhop your round to space. Dual O ring cylinder head,Oring nozzle,AOE correction,shimming,etc.. Polishing your cylinder is also a good idea. Grease it up well too. For a barrel PDi is the best,but Laylax will feel the same since you will be firing with bursts and not single shot,it really depends on how much you want to spend. With buckings,Maple leaf is good. PDi W hold is good too but has trouble lifting heavier rounds. G&G green is what i generally use since it's cheap and good. Stock CYMA hop unit should be fine. You can do flat hop,G-Hop or R-hop,I can only say that G-hop isn;t super hard and works well if you use good bucking,G&G's ones are good for this in my experience again since my old craft knife liked them more Honestly I'm out of the loop tech wise since I've reduced chairsofting by a fair bit. Josh95 1
Josh95 Posted June 20, 2015 Author Posted June 20, 2015 Since you have the CYMA I'd recommend doing basic reliability mods first,mainly compression since you want good range. Do note that range upgrades and accuracy upgrades go hand in hand,unless we're talking about how far you can overhop your round to space. Dual O ring cylinder head,Oring nozzle,AOE correction,shimming,etc.. Polishing your cylinder is also a good idea. Grease it up well too. For a barrel PDi is the best,but Laylax will feel the same since you will be firing with bursts and not single shot,it really depends on how much you want to spend. With buckings,Maple leaf is good. PDi W hold is good too but has trouble lifting heavier rounds. G&G green is what i generally use since it's cheap and good. Stock CYMA hop unit should be fine. You can do flat hop,G-Hop or R-hop,I can only say that G-hop isn;t super hard and works well if you use good bucking,G&G's ones are good for this in my experience again since my old craft knife liked them more Honestly I'm out of the loop tech wise since I've reduced chairsofting by a fair bit. good advice, i have already order a new oring nozzle (cyma ones are crap). will look into other compression stuff you mentioned
beastmode Posted June 21, 2015 Posted June 21, 2015 Thanks, wasn't aware of that. I will buy a few buckings then, I'm looking at trying prometheus purple or firefly soft along with a flat nub(firefly or prometheus?) Sorry for diverting the thread to the op, I've heard great things about the cyma aks, great inside and out, and all they really need is the usual barrel clearn etc to perform very well Prommy purple works well with flat hop. I used a g&g green in mine and that works well too. I sanded the notch in my bucking down instead of slicing it with a knife as I didn't want to knacker the bucking. Went from getting 40-50 mtr range to getting 65-70 metre range and better accuracy with flat hop. I'm getting someone to R-hop it for me next month though so that I don't have to change Buckings so often. Josh95, GingerBreadMan and Monty 3
Josh95 Posted June 21, 2015 Author Posted June 21, 2015 Prommy purple works well with flat hop. I used a g&g green in mine and that works well too. I sanded the notch in my bucking down instead of slicing it with a knife as I didn't want to knacker the bucking. Went from getting 40-50 mtr range to getting 65-70 metre range and better accuracy with flat hop. I'm getting someone to R-hop it for me next month though so that I don't have to change Buckings so often. what barrel did u use to flathop?
beastmode Posted June 21, 2015 Posted June 21, 2015 Just used the stock g&g 6.03. Plan on getting a Prommy 6.03 though when I get the r hop. Josh95 and Monty 2
Josh95 Posted June 21, 2015 Author Posted June 21, 2015 Just used the stock g&g 6.03. Plan on getting a Prommy 6.03 though when I get the r hop. I cannot find any in stock anywhere
Guest PT247 Posted June 21, 2015 Posted June 21, 2015 ahh bum, I have a few Prommy barrels, but they are all short ones.
beastmode Posted June 21, 2015 Posted June 21, 2015 Try eagle6 they have some in stock. Monty and Josh95 2
MxHaze Posted June 21, 2015 Posted June 21, 2015 ahh bum, I have a few Prommy barrels, but they are all short ones. What ones have you got?
Josh95 Posted June 21, 2015 Author Posted June 21, 2015 Try eagle6 they have some in stock. I noticed they have those "miracle barrels" recon theyre any good or just bullsh*t?
Supporters ImTriggerHappy Posted June 21, 2015 Supporters Posted June 21, 2015 I cannot find any in stock anywhereGet a pdi 6.05 instead. Try airlab for them. Josh95 and Monty 2
Guest PT247 Posted June 21, 2015 Posted June 21, 2015 Am at work now MxHaze, will have a look tomorrow
GingerBreadMan Posted June 21, 2015 Posted June 21, 2015 Get a pdi 6.05 instead. Try airlab for them. for pdi - xfire, the distributer, is also worth a look ImTriggerHappy 1
Supporters ImTriggerHappy Posted June 21, 2015 Supporters Posted June 21, 2015 for pdi - xfire, the distributer, is also worth a lookYeah but I always recommend a UK seller if possible. GingerBreadMan 1
GingerBreadMan Posted June 21, 2015 Posted June 21, 2015 Yeah but I always recommend a UK seller if possible. I understand a few people buy and recommend UUK sellers, however personally if i am after something not urgently ill usually buy from abroad
Josh95 Posted June 21, 2015 Author Posted June 21, 2015 SHOPPING CART Lonex Cylinder Head Version 3 +- £11.99 Remove Prometheus Soft Purple AEG Bucking +- £9.99 Remove PDI 6.05mm Precision Steel Barrel AEG 472mm +- £89.99 Remove Special instructions for seller Subtotal £111.97 what do people think of this, (cost almost what the bloody gun did) will it make a noticeable improvement? Unrustle_Thine_Jimmies 1
Supporters ImTriggerHappy Posted June 21, 2015 Supporters Posted June 21, 2015 SHOPPING CART Lonex Cylinder Head Version 3 + - £11.99 Remove Prometheus Soft Purple AEG Bucking + - £9.99 Remove PDI 6.05mm Precision Steel Barrel AEG 472mm + - £89.99 Remove Special instructions for seller Subtotal £111.97 what do people think of this, (cost almost what the bloody gun did) will it make a noticeable improvement? No one thing makes a huge difference but it all adds up. Try firefly or maple leaf buckings over the prommy I would only use the prommy for g hop.Not saying the prommy bucking is bad its still the best material just not the best design.
Josh95 Posted June 21, 2015 Author Posted June 21, 2015 im really struggling to click buy, I think I will play one game with the gun stock. see how it performs then make my decisions Unrustle_Thine_Jimmies, Colonel Kurtz and sp00n 3
Guest PT247 Posted June 21, 2015 Posted June 21, 2015 Aye no point buying upgrades until you know shortfalls.
beastmode Posted June 22, 2015 Posted June 22, 2015 I noticed they have those "miracle barrels" recon theyre any good or just bullsh*t? yeah I put one in my g36 and it seems to work quite well. They aren't massively expensive either only about £40. Not sure if you can flat hop them though.
Supporters ImTriggerHappy Posted June 22, 2015 Supporters Posted June 22, 2015 Josh95 i may have something for youNo grooming on the forum. AirsoftTed, Monty, sp00n and 1 other 4
Recommended Posts