iirishwarrior Posted June 29, 2015 Posted June 29, 2015 what other brands (TM WE) will fit the kj works glock 18c and weres best place to get inlet and outlet replacement valves for the kjw magazines? thanks in advance
Guest RektnNekt Posted June 30, 2015 Posted June 30, 2015 I believe that KJW is in fact a TM clone - so in theory, any parts from TM or a TM clone should work. I've got a TM G18C GBB and a WE mag fits it perfectly. However, do refer to this post: http://www.airsoftohio.com/forums/showthread.php?t=48822 If you want the mag to drop out freely, you may have to file down the little metal extrusion (as shown in the thread). You don't have to, but it just means you will have to pull the mag out.
iirishwarrior Posted June 30, 2015 Author Posted June 30, 2015 you are a legend, thankyou so much for your help, so TM inlet and outlet valves will work too?
Guest RektnNekt Posted June 30, 2015 Posted June 30, 2015 If I'm perfectly honest, I'm not particularly sure - despite clone parts being able to fit in place of other clone parts, there may be a slight change in their construction. For example, the magazines as mentioned above are slightly different as they have that added metal piece, but they still work. I'd assume that they'd work because I've used parts interchangeably before, but it couldn't hurt to send the seller/company a message and ask about compatibility.
Recommended Posts