Dannn Posted July 16, 2015 Posted July 16, 2015 My tanfoglio mag was leaking, basically as soon as I fitted the cartridge all the gas fell out... It was leaking from the little doughnut shaped seal that sits around the "spike" So I made a new one... Ground the top off a gas Cartridge, got a drill bit the same size as the doughnut seal, drilled that in to the end of the cartridge and used that as a stamp to cut out a little ring of rubber... And to put the little hole in the middle, fit the rubber, take an old empty cartridge and fit it as usual and the cutter puts a little hole in it ! Job done. Grab a beer. Thank you. proffrink 1
Root Admin proffrink Posted July 16, 2015 Root Admin Posted July 16, 2015 Those little o-rings and the fact that the cartridge didn't always come out are the two real PITAs when it comes to the CO2 mags I have for my WOC. Bought enlarged o-rings and a very weak spring (for ejecting the cartridge more easily) and that seemed to remedy things quite a lot. Glad you fixed it.
Recommended Posts