Root Admin proffrink Posted November 16, 2015 Root Admin Posted November 16, 2015 Where do you source yours? RWA UK?
Guest PT247 Posted November 16, 2015 Posted November 16, 2015 aye. I have got them from elsewhere in the past too but can't remember where though.
Root Admin proffrink Posted November 16, 2015 Root Admin Posted November 16, 2015 I might give them a try. I've given Devil .30s a go in my M249 but I can't tell if they're any good as that thing chops like there's no tomorrow until it hits the 8-10k mark.
elrasho Posted November 16, 2015 Author Posted November 16, 2015 Managed to do some test shots this morning. Using .25g BBs and they fly out straight as an arrow! They go so far that I can't actually see the drop Will be getting some 0.3g and 0.32g BBs soon and will use them to test accuracy and zeroin my scope.
elrasho Posted November 22, 2015 Author Posted November 22, 2015 Did some accuracy and range testing today. My target is a meta pipe about the length of a torso and I placed it at around 130 feet.Out of 10 shots 5 would hit the target. The odd one or two were widely off target an the rest were probably due to me being a noob at sniping. I wasn't proned, I was just holding the sniper stood up and aiming down the scope.The scope seems to be zeroed in already obviously the BBs don't hit at the center of the crosshairs but this is Airsoft not Battlefield 4.Had an issue where the bolt wouldn't lock back into place. Taking it apart it's the pin that keeps slipping down, is there a fix for this?Also what could be causing some shots to go widely of target? Could it be no bbs are too light at 0.3g?
Aengus Posted November 22, 2015 Posted November 22, 2015 Probably you have to break in the hop but until then you'll get the occasional flyers or chopped bbs elrasho 1
Supporters Samurai Posted December 18, 2015 Supporters Posted December 18, 2015 Get a good hopup rubber, for example maple leaf with concave nub, and clean the barrel.
Governor Posted December 22, 2015 Posted December 22, 2015 I got a pretty shagged BAR-10 G-Spec that was slam firing. I got a bunch of stuff and it works like a charm! - PDI One-Piece Hop-Up v2 - PDI W-Hold Bucking - 6.01 AEG Barrel (303mm) - AirsoftPro EZ Trigger - AirsoftPro 90deg. Piston - AirsoftPro Steel Spring Guide - M150 Spring - Custom Barrel Spacers This, along with a CNC machined bolt handle and a CNC machined rear section of the receiver (left handed) have made this an absolutely amazing gun to use. Sadly, I only manage to use it once or twice a year!
Recommended Posts