Mr airsoft Posted August 2, 2015 Posted August 2, 2015 Does any one know good hi caps to use that feed well in the g&p lmt mrp - also known as the ares defender 2000 , or just in m4's in general
Adam3088 Posted August 2, 2015 Posted August 2, 2015 Not used hicaps in a while but the G&G ones were always rock solid. Managed the snap the spring in one but only after I dropped it in mud and then over-wound it when it jammed, simply coiled the spring round a bit more and it was good to go again. Mr airsoft 1
iBrowniee x Posted August 2, 2015 Posted August 2, 2015 I just use standard SRC Hi caps if I play at woodland sites but if you play CQB I would recommend getting mid caps it saves you winding all the time.
BrightCandle Posted August 3, 2015 Posted August 3, 2015 Lonex flash mags. They replaced the winder with a draw tab and they seem to hold so much wind from the first one that you don't seem to have to wind it again, it will more or less empty the mag. I have one, its by far the best hi cap I have. Frosty0769 1
Supporters Lozart Posted August 3, 2015 Supporters Posted August 3, 2015 Lonex flash mags. They replaced the winder with a draw tab and they seem to hold so much wind from the first one that you don't seem to have to wind it again, it will more or less empty the mag. I have one, its by far the best hi cap I have. Same here. I have a couple of G&G ones which are fine but the Lonex one is fantastic.
BrightCandle Posted August 3, 2015 Posted August 3, 2015 Do flash mags still rattle? Its a hicap, they all rattle.
Frosty0769 Posted August 21, 2015 Posted August 21, 2015 I run four flash mags. They're great and wish I new about them before I wasted money on other mags. A couple of pulls on the wire. Then another one the mag is in the gun and they last to the last bb!
Recommended Posts