ronin677 Posted August 13, 2015 Posted August 13, 2015 Hi guys, I need to find a replacement bolt, spacer and sprung knob for my CYMA AK74. Any ideas where I can find these parts? See photos. Bolt & spacer Sprung knob in stock Area missing parts cheers Jon
Supporters Sitting Duck Posted August 13, 2015 Supporters Posted August 13, 2015 Got cheapo crap like that That "might" do the job..... Folding AK stock bits n bobs that could fit Didn't chime in earlier coz thought you was after bespoke m14 hop or something But 74 stuff might be able to use /help ronin677 1
ronin677 Posted August 13, 2015 Author Posted August 13, 2015 Got cheapo crap like that That "might" do the job..... Folding AK stock bits n bobs that could fit Didn't chime in earlier coz thought you was after bespoke m14 hop or something But 74 stuff might be able to use /help You got the bits that might do the job? Would be mighty appreciative if you had
Supporters Sitting Duck Posted August 14, 2015 Supporters Posted August 14, 2015 Sitting Duck's used (knackered) Used AEG's & breakers yard: ronin677 and Lozart 2
AK47frizzle Posted August 14, 2015 Posted August 14, 2015 You might find some at airsoft-club.com, they sell s wide variety of spare parts for nearly everything
ronin677 Posted August 14, 2015 Author Posted August 14, 2015 Sitting Duck's used (knackered) Used AEG's & breakers yard: How much for those bits?
Supporters Sitting Duck Posted August 14, 2015 Supporters Posted August 14, 2015 2 bolts, 2 brass sleeves + 2 sprung lugs/bullets oooh dunno special order them mofo's £3 posted ??? - can just chuck 'em in a jiffy bag It came off the AKFrizzle 901c crappy double eagle krinkov bollox but them bits and the folding stock should be compatible (99% reckon it is probably made by Cyma or JG I would of thought) if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway £6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars it should work with just screws/sleeves/lugs etc..... you shouldn't need any of the 901c stock itself really worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok ronin677 1
Raffles Posted August 14, 2015 Posted August 14, 2015 CYMA stuff seems to either be welded solid with threadlock from the factory or have none at all and go flying into the undergrowth never to be seen again. I got an M14 from CYMA and some bright spark had threadlocked the hop adjustment wheel! A £3 investment in decent threadlock is far better than forking out a load for replacement parts, if you can find them. ronin677 1
ronin677 Posted August 14, 2015 Author Posted August 14, 2015 2 bolts, 2 brass sleeves + 2 sprung lugs/bullets oooh dunno special order them mofo's £3 posted ??? - can just chuck 'em in a jiffy bag It came off the AKFrizzle 901c crappy double eagle krinkov bollox but them bits and the folding stock should be compatible (99% reckon it is probably made by Cyma or JG I would of thought) if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway £6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars it should work with just screws/sleeves/lugs etc..... you shouldn't need any of the 901c stock itself really worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok Send me your Paypal addy and I'll send you the £6
Recommended Posts