Rowed Posted January 12, 2016 Posted January 12, 2016 Right guys I'm going to be doing a hpa polar star jack install into a scar soon ( assuming that most the version2 gearboxs are relatively the same across the makes but it will most likely be on a G&G scar L ) just wanted to know any differences in the two gearboxes and external gearbox parts things like trigger unit , selector plate etc , they whole gear box is going to be stripped out anyway apart from trigger unit safety , Spring guide and that's about it off the top of my head ...
Supporters Lozart Posted January 13, 2016 Supporters Posted January 13, 2016 The G&G SCAR gearbox isn't a totally standard V2 box. The ambidextrous fire selector is driven by gears mounted on the outside and the nozzle is an odd length too. The hop unit is proprietary and is screwed in place. I recently fitted a BTC Spectre to mine and while it is broadly the same there are some ...special... tweaks as I say. Rowed 1
Rowed Posted January 13, 2016 Author Posted January 13, 2016 Do you think I'll come across any issues with a jack drop in instal iv spoken to them about the nozzle and they have said that if the m4 one does not fit they will custom make me one which is good
Supporters Lozart Posted January 14, 2016 Supporters Posted January 14, 2016 No idea, never tried it. The SCAR nozzle is longer if I remember correctly.
Rowed Posted January 15, 2016 Author Posted January 15, 2016 the only other option i can think of is if the VFC scar gearbox sits the same way into the lower section of the scar as the G&G one i could source a second hand VFC gear box and drop it in ...
Supporters Lozart Posted January 18, 2016 Supporters Posted January 18, 2016 the only other option i can think of is if the VFC scar gearbox sits the same way into the lower section of the scar as the G&G one i could source a second hand VFC gear box and drop it in ... That sounds like making problems for the sake of it. Stick with the G&G and deal with whatever that throws up.
Recommended Posts