eddie-biggs Posted August 19, 2021 Posted August 19, 2021 7 hours ago, leadly said: Haven't seen any places with stock of MTW mags for a while. I've been using £10ish nuprol mid caps with absolutely no problems whatsoever. Although last Sunday I busted out my new shiney PTS EPM1's and they were faultless. I think some people have feeding issues with "excessive" rate of fire but my two mags and my mates two mags coped just fined! Got 4 mags for £100 from Patrolbase. Thanks for the reply I will have a look for PTS EPM mags might have to save now, skint from buying the MTW lol
leadly Posted August 19, 2021 Posted August 19, 2021 @eddie-biggs Apparently high pressure Airsoft have some mags in stock at the moment!
GothicGhost Posted August 27, 2021 Posted August 27, 2021 Bought MTW billet version few weeks ago and I just noticed the inner barrel has lot of wobble.
leadly Posted August 28, 2021 Posted August 28, 2021 2 hours ago, GothicGhost said: Bought MTW billet version few weeks ago and I just noticed the inner barrel has lot of wobble. A few even wraps of tape sorted mine. Just add a little bit at a time and test fit until your happy with the fit! GothicGhost and Monkman 2
GothicGhost Posted August 31, 2021 Posted August 31, 2021 On 28/08/2021 at 02:25, leadly said: A few even wraps of tape sorted mine. Just add a little bit at a time and test fit until your happy with the fit! Thanks I will give that a go. leadly 1
Monkman Posted September 8, 2021 Posted September 8, 2021 Our site photographer got a good one of my MTW last sunday... **edit slightly leadly 1
leadly Posted September 9, 2021 Posted September 9, 2021 12 hours ago, Monkman said: Our site photographer got a good one of my MTW last sunday... **edit slightly Oooooh is that the Run cam scope cam 2? You happy with it? I've been debating getting one for months and months now!
Monkman Posted September 9, 2021 Posted September 9, 2021 Yep, still messing with it and trying to find optimal settings... This weekend will be trying the full 4k but it's only 30fps on 4k...there is also 2k and 1080p with much higher refresh rates.. I'm just trying to get back into video editing..used to do a lot when I played ARMA years ago..trying to remember how to use my software..
leadly Posted September 9, 2021 Posted September 9, 2021 6 hours ago, Monkman said: Yep, still messing with it and trying to find optimal settings... This weekend will be trying the full 4k but it's only 30fps on 4k...there is also 2k and 1080p with much higher refresh rates.. I'm just trying to get back into video editing..used to do a lot when I played ARMA years ago..trying to remember how to use my software.. I've messed about with Adobe Premier Pro for a few hours a few months ago, I reckon, with the free time I get, it'll take a few months to put anything together! Do you run yours off a power bank or just change battery? Cheers
CRTHayes Posted September 15, 2021 Posted September 15, 2021 Hi all the mtw fans and owners out there, i looking at purchasing an mtw and wandered what you all think is the optimal hopup and barrel setup? Obviously these vary from person to person but I’d like to see what you all using Personally was thinking a nice tight bore with modify flat hop rubber and nub but not sure how this would work? any Information/knowledge would be awesome
leadly Posted September 16, 2021 Posted September 16, 2021 Hello, I'd try using it standard before you start changing anything mate!
eddie-biggs Posted September 18, 2021 Posted September 18, 2021 Can someone tell me about dive bottles please, I've looked at a 12lt 300bar tank but is this to much for my bottle as tls only 3000psi ca someone help...
leadly Posted September 19, 2021 Posted September 19, 2021 The 300 bar dive tank is the correct tank to fill your "gun tank" with. I've currently got a 3litre one but will be upgrading to a 7litre tomorrow as too many of my mates run HPA now and I run 3, but could use upto 5 of mine with HPA now. 19 hours ago, eddie-biggs said: Can someone tell me about dive bottles please, I've looked at a 12lt 300bar tank but is this to much for my bottle as tls only 3000psi ca someone help... Monkman 1
Monkman Posted September 19, 2021 Posted September 19, 2021 19 hours ago, eddie-biggs said: Can someone tell me about dive bottles please, I've looked at a 12lt 300bar tank but is this to much for my bottle as tls only 3000psi ca someone help... Yep..300bar is correct...just fill your bottle to 3000 psi from it. Just bare in mind the more you refill from the tank in the bottle the pressure slowly lowers and at some point bottle and tank will equalise, so you may get to a point where you can only fill to 2000psi, while this is still ok to use in games, just means you may have to top it up again...or just take the tank to a dive shop and get it refilled to 300bar.
eddie-biggs Posted September 19, 2021 Posted September 19, 2021 3 hours ago, Monkman said: Yep..300bar is correct...just fill your bottle to 3000 psi from it. Just bare in mind the more you refill from the tank in the bottle the pressure slowly lowers and at some point bottle and tank will equalise, so you may get to a point where you can only fill to 2000psi, while this is still ok to use in games, just means you may have to top it up again...or just take the tank to a dive shop and get it refilled to 300bar. Thanks for the help am looking for a bottle now. had a game today and when I got to 1500psi my gun ran like shit lol I know now to to keep it over 2000psi
eddie-biggs Posted November 20, 2021 Posted November 20, 2021 Today I've put a 60 micron maple leaf,the first time I've ever changed anything lol. It's now going off to the right after 25/30 meters. Have I don't something wrong? So if I turn the gun to the left it shoots pretty much perfect. Please tell me it's an easy fix
Hunka1988 Posted November 20, 2021 Posted November 20, 2021 It sound like you haven't lined up the barrel and bucking correctly. The window needs centering, the hook to the right you are seeing is from the bucking applying hop off centre. If it helps the guide line on the barrel usually needs to be lined up with the faint seam on the hop unit itself.
eddie-biggs Posted November 21, 2021 Posted November 21, 2021 21 hours ago, Hunka1988 said: It sound like you haven't lined up the barrel and bucking correctly. The window needs centering, the hook to the right you are seeing is from the bucking applying hop off centre. If it helps the guide line on the barrel usually needs to be lined up with the faint seam on the hop unit itself. Thanks I will try in the week
Hunka1988 Posted November 25, 2021 Posted November 25, 2021 How did you get on? I had issues with ML Super when using light weight ammo (.25) for cqb. I've just swapped out to a g&g green with an omega nub (suggested on the mtw owner club) as unconventional as it is it works incredibly well.
leadly Posted November 25, 2021 Posted November 25, 2021 I have the G&G green bucking and cannot fault it. I've noticed the new billet also comes with this bucking as standard!
GothicGhost Posted December 5, 2021 Posted December 5, 2021 Does anyone know what barrel nut would fit on MTW threads along with delta ring set? This is what I want to make my MTW look like image below. Thanks.
lukeB Posted December 6, 2021 Posted December 6, 2021 I think you just need an AEG delta ring and front post set. On my mtw the outer barrel is 1-2mm too thick for the front post I have, so need to sand/enlarge inside of the front post to get it to fit. Not sure if the MTW outers are built to a different spec Pic: The post clears the first inch of the mtw barrel but then it widens slightly.
wicksy101 Posted March 3, 2022 Posted March 3, 2022 (edited) On 31/10/2020 at 17:40, alxndrhll said: Aye, I've looked a few times. They have the 10" version in stock currently and I've nearly 'pulled the trigger' a few times but their pricing on the RIFs themselves is significantly higher than High Pressure (works out about £100 more before shipping). Pricing on parts seems roughly the same after conversion, so I'll heed your recommendation and head there for those. A tad weird that the RIFs themselves have such a large price jump! I know this is an old comment but just FYI for anybody else that is thinking this.... High pressure airsoft add on taxes when you get to the shipping page and its around £100. Other sites price it with tax on the page.... That's why it looks cheap... Either way, mine comes today :). Edited March 3, 2022 by wicksy101 leadly 1
Recommended Posts