Supporters Samurai Posted April 11, 2019 Supporters Posted April 11, 2019 Sorry, I always mix up the names. For AEG, it's prometheus, for VSR (and the Striker) it's Nine Ball. Yes, the Nine Ball works with the original barrel. You can cut the bridge off the original barrel but the hole is still very narrow, you might need to enlarge that too for a maple leaf bucking.
Solly4568 Posted April 24, 2019 Author Posted April 24, 2019 Holy crap. My new sears arrived yesterday and I just fitted them. Before the nice and shiny sears, the bolt would scrape against the sears and the bolt pull would be a bit shite. Now it is so smooth it is comparable to my mates VSR. Also got a thread adaptor and the whole thing looks so stupid with my tiny little trace unit on it. I love it so much ?
ProPain87 Posted May 7, 2019 Posted May 7, 2019 Update picture of my striker ? changed the cheapo high scope mounts to better quality hawke medium mounts to match the hawke scope, put a bespoke flat trigger in and changed the stock and grip. Firing .43s like a dream. Going to finish setting up the scope this week and get to test it on Saturday not chrono’d on .43s yet but firing .4s at 2.2j Samurai and MandalShArK 2
Supporters Samurai Posted May 7, 2019 Supporters Posted May 7, 2019 Nice, except for the trigger. This is the best: http://printedairsoft.co.uk/products Because I make them. But seriously. During the process of designing, I made them with 4 different curvatures and the straightest (which was still not flat) was uncomfortable for me. ProPain87 1
ProPain87 Posted May 7, 2019 Posted May 7, 2019 I’m actually not too sure on it at the minute, it sits quite far forward. Feels ok to use without gloves but not sure how it’ll be with. Going to game with it on Saturday and see how I get on. Your trigger is for an as02 mines the 01 Samurai 1
Solly4568 Posted May 18, 2019 Author Posted May 18, 2019 Do you guys know if there is any way to get the spiral outer barrel for the AS01 on a rifle when it has the action army hop up chamber installed? because I am starting to think that I will need to get a refund
Solly4568 Posted May 18, 2019 Author Posted May 18, 2019 8 minutes ago, E21A said: Need so grind down the inside What method would you recommend and how long did it take you Thanks
E21A Posted May 19, 2019 Posted May 19, 2019 2 hours ago, Solly4568 said: What method would you recommend and how long did it take you Thanks Ive not donenot personally. Other option is the get a second generation. AA hop
Solly4568 Posted May 20, 2019 Author Posted May 20, 2019 So I have nearly finished upgrading my rifle, so here is a picture Now the only problem is that the hop up is not engaging enough, and I think that it might be because I put a hop up bucking in my gun that is too hard as it works with all the upgrade parts and the OG hop rubber. So I have ordered a 60o Bucking which should hopefully work better than the 75o one that is currently in there. Fingers crossed. Samurai 1
Supporters Samurai Posted May 20, 2019 Supporters Posted May 20, 2019 75 is way too hard IMO. 70 was too hard for my VSR. 60 is sweet.
Solly4568 Posted May 20, 2019 Author Posted May 20, 2019 37 minutes ago, Samurai said: 75 is way too hard IMO. 70 was too hard for my VSR. 60 is sweet. Yeah I'm just realizing that and I just hope I have the same range that I had for a few shots with the 75 as I was getting well over 100m
Solly4568 Posted May 27, 2019 Author Posted May 27, 2019 OK boys, the 60o hop up rubber and it is perfect. It worked perfectly over the weekend and i am now getting around 120-130 meter shots. One question though, does anyone know where to get a 90o cylinder because that is really the only thing that my gun is missing ?
E21A Posted May 27, 2019 Posted May 27, 2019 36 minutes ago, Solly4568 said: OK boys, the 60o hop up rubber and it is perfect. It worked perfectly over the weekend and i am now getting around 120-130 meter shots. One question though, does anyone know where to get a 90o cylinder because that is really the only thing that my gun is missing ? https://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-ares-amoeba-striker/upgrade-set-pro-ares-amoeba-striker-detail Solly4568 1
Solly4568 Posted May 31, 2019 Author Posted May 31, 2019 hey guys i just got a Lycan 90o sear and the pegs that come with the gun don't appear to go though the hole in the sear. Should I send it back or is this common mistake with an easy fix
E21A Posted June 1, 2019 Posted June 1, 2019 19 hours ago, Solly4568 said: hey guys i just got a Lycan 90o sear and the pegs that come with the gun don't appear to go though the hole in the sear. Should I send it back or is this common mistake with an easy fix Where did you order from?
Solly4568 Posted June 1, 2019 Author Posted June 1, 2019 i got it off Ebay but it is all fixed thankfully after about 2 hours and a lot of sand paper
Tama Posted July 14, 2019 Posted July 14, 2019 Has anyone here seen/tried the AS03? It's the smallest Amoeba yet but it looks so cute imo. It's really hard to find detailed info on it tho, I'm curious to see if it's compatible with AS02 parts.
E21A Posted July 14, 2019 Posted July 14, 2019 10 minutes ago, Tama said: Has anyone here seen/tried the AS03? It's the smallest Amoeba yet but it looks so cute imo. It's really hard to find detailed info on it tho, I'm curious to see if it's compatible with AS02 parts. It will be, it’s just a chopped down version. Also, in my opinion, utterly pointless ProPain87 1
Tama Posted July 14, 2019 Posted July 14, 2019 2 minutes ago, E21A said: It will be, it’s just a chopped down version. Also, in my opinion, utterly pointless Thanks, Certainly is quite a silly idea, but for some reason I like it o.o A little pocket sniper to run as a secondary.
Skara Posted September 15, 2019 Posted September 15, 2019 Anyone using any dampening material on piston/cylinder head? Would neoprene be a valid alternative to the extremely expensive sorbothane? Need to reduce the noise AND reduce the cylinder volume (mainly to reduce the noise).
E21A Posted September 15, 2019 Posted September 15, 2019 52 minutes ago, Skara said: Anyone using any dampening material on piston/cylinder head? Would neoprene be a valid alternative to the extremely expensive sorbothane? Need to reduce the noise AND reduce the cylinder volume (mainly to reduce the noise). Sorbo pads are £2.50 from Ak2m4
Skara Posted September 15, 2019 Posted September 15, 2019 11 minutes ago, E21A said: Sorbo pads are £2.50 from Ak2m4 + shipping to Italy and 10 days delivery hoping the package doesn't get lost. Also they are out of stock was looking for a more homemade solution, I guess for now neoprene will have to do.
ProPain87 Posted September 15, 2019 Posted September 15, 2019 50 minutes ago, Skara said: + shipping to Italy and 10 days delivery hoping the package doesn't get lost. Also they are out of stock was looking for a more homemade solution, I guess for now neoprene will have to do. Skirmshop have pads, why do you need to reduce volume? https://www.skirmshop.nl/en/air-pad-v2-v3-3-16-70d.html
Recommended Posts