Liamcella96 Posted October 19, 2021 Posted October 19, 2021 Hi guys. I have an mk23 pistol and as you'd expect my TM mags started leaking... what a surprise. Im 99% sure it was due to old dried out O rings but whilst I was having to open it anyway I thought I may as well do the full monty. So I have filled the release valve with resin as is recommended. 1 thing I didn't do though as I had read it was OK was I didnt remove the valve from the hole before filling it on top of the valve. Does this make any difference? Or am I going to have to drill it all out and refill it? I'm pretty sure it shouldn't matter as it is still completely filled but can somebody confirm please. Thanks
Liamcella96 Posted October 19, 2021 Author Posted October 19, 2021 7 hours ago, heroshark said: Suck it and see, should be. Yeah it's a complete air seal. But does it matter that the valve is in there still
heroshark Posted October 19, 2021 Posted October 19, 2021 Should be I leave them in but I don't use epoxy.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.