Swapping gate x asr to a nano aab

[steverebo]

I have a specna arms e07 edge and want to add active breaking with the nano aab. I have looked at the manual and it appears that I can just swap them out as the sa e07 has the 2 live wires on one trigger contact and the single signal wire on the second as described in the nano aab installation.

 

I just want to confirm this is right

[Adolf Hamster]

why do you want active braking?

 

without precocking active brake is generally not that useful, even detrimental, outside of a subset of builds that are using the old school "just make it faster" approach to trigger response.

[steverebo]

31 minutes ago, Adolf Hamster said:

why do you want active braking?

 

without precocking active brake is generally not that useful, even detrimental, outside of a subset of builds that are using the old school "just make it faster" approach to trigger response.

I'm going 13:1 gears with a 16tpa high torque motor and don't want to start removing teeth ect to stop overshoot and active breaking appears to be the best way 

[Adolf Hamster]

As long as it aint rolling into double firing overspin is just free precocking.