KarlosM15 Posted January 17, 2022 Posted January 17, 2022 Hi all, wondering if you can help I rebuilt my v2 gearbox in my old ASG M15 last year just before the festival it worked great but was over powered so the lads at the festival dropped a lower spring in wicked job done running 345fps or so I thought took it out just before Xmas and now have this problem with full auto in semi! I’ve changed the trigger switch, spring on cut off lever, the cut off lever itself the only thing I haven’t done is gears? Does anyone think that could be the problem don’t want to spend much more on an old gun money I’d spent on it could have brought me a new gun! also have the trigger getting stuck and clicking noises which I didn’t have before! Any help much appreciated thanks
RostokMcSpoons Posted January 17, 2022 Posted January 17, 2022 As someone quite new to tech'ing, I'd question whether the selector gears / plate were correctly positioned - but as you've been taking it all apart and putting it back together then I'd say that's unlikely. *Unless* you've been putting it back together exactly as 'the lads' had done...? In which case they may have got it wrong and you're keeping it the same? Paul72 1
Iceni Posted January 18, 2022 Posted January 18, 2022 (edited) First thing I would check is the COL is moving. If you've had it in bits there's always the chance you nipped it up a little too much and now it's binding. Or the other common mistake, you forgot to put the little spring back on the COL. How exactly does the fault present itself? By that I mean how is the trigger functioning. Does it stick on full auto, Or does it stop as soon as you release the trigger. If it's sticking you might have the contact a little tight and it's holding the trigger dolly. If you've changed the trigger it may be riding a little high and keeping engaged on the dolly. The Dolly return spring might prefer to be in the other way round and it's keeping the dolly pressed to the trigger. Edited January 18, 2022 by Iceni Paul72 and Rogerborg 2
KarlosM15 Posted January 19, 2022 Author Posted January 19, 2022 Done all those and even replaced! Spoke to a tech thinks it could be gears or selector plate! To be honest it’s an old gun brought like 2010 or something like that so was thinking of just replacing the gearbox shell. Then can get new bits that didn’t buy already maybe give that a try! what is a good v2 gearbox replacement?
colinjallen Posted January 19, 2022 Posted January 19, 2022 Is it possible that the sector gear is shimmed too high so is not engaging the cutoff lever?
KarlosM15 Posted January 20, 2022 Author Posted January 20, 2022 I’ll have a look, does the cut off lever have to be solid or have some play in it cause mine is wobbly?
colinjallen Posted January 20, 2022 Posted January 20, 2022 It should be just loose enough to move freely.
KarlosM15 Posted January 26, 2022 Author Posted January 26, 2022 Tried all these plus re shimmed the gearbox! still getting slight full auto in semi plus trigger is sticking in semi only checked all springs and moving parts haven’t got a clue what it could be!
KarlosM15 Posted October 11, 2022 Author Posted October 11, 2022 Just a quick update I’m now going to use gun for spares as I don’t want to spend anymore money on an old gun so have since brought 3 new AEG’s ASG SPR ARTHURIAN EXCALIBER M16M203 SPECNA ARMS M4 based model for the missus!
Recommended Posts