mirinjawbro Posted February 22, 2022 Posted February 22, 2022 Hello all finding myself with some spare time at home at the moment and looking to keep busy what is the cheapest SMG / rifle AEG that can easily be "upgraded" id like to mess around with springs / pistons / rof thanks
AK47frizzle Posted February 22, 2022 Posted February 22, 2022 Any metal gearbox m4 tbh. Most are under 100, with Cyma probs the cheapest at 80 ish Nick G and Rogerborg 2
Skara Posted February 22, 2022 Posted February 22, 2022 Galaxy Mp5K. Cheaper than dirt and a decent project gun (imo) Rogerborg 1
mirinjawbro Posted February 22, 2022 Author Posted February 22, 2022 (edited) thanks. mp5k is actually my favourite SMG. sorry should of added. i already have an AK / MP5 SD5 Edited February 22, 2022 by mirinjawbro
AK47frizzle Posted February 22, 2022 Posted February 22, 2022 I'd still recommend the m4 just because there are waaaaay more parts for an m4 than there are for mp5. V3 parts seem to be more scarce these days.
BigStew Posted February 22, 2022 Posted February 22, 2022 48 minutes ago, mirinjawbro said: Hello all finding myself with some spare time at home at the moment and looking to keep busy what is the cheapest SMG / rifle AEG that can easily be "upgraded" id like to mess around with springs / pistons / rof thanks Bit of an oxymoron as soon as you open it up what ever reliability you had is gone just go for what you like the look of. BigAl and Rogerborg 1 1
Supporters Rogerborg Posted February 22, 2022 Supporters Posted February 22, 2022 28 minutes ago, Skara said: Galaxy Mp5K. Cheaper than dirt and a decent project gun (imo) Yup. Full, robust V3 gearbox. With an M100 spring, 6.01mm x 110mm (off the top of my head, it might be 105mm) barrel but otherwise stock air seal components, mine is currently shooting at 0.95-0.97J (320-324 fps) and is an absolute blast to use. They're not magic. The motor really wants upgraded, the two-piece trigger has a lonnnnng pull, the hop isn't great, and the consistency is all over the place - my working theory is that the barrel isn't held in place securely enough, although as part of rewiring to the rear, I've deleted off the front fuse holder and the bracing piece that held it, so I may have done that to myself. I've never found an 11.1V that will fit in the battery tube, although you can get a small mosfet in behind a short 7.4V. But all that goes to illustrate that there are load of things that you can do with them.
mirinjawbro Posted February 22, 2022 Author Posted February 22, 2022 its more to play around with rather than be used for skirmish etc. seems they are out of stock most places. discontinued?
BigStew Posted February 22, 2022 Posted February 22, 2022 53 minutes ago, mirinjawbro said: its more to play around with rather than be used for skirmish etc. seems they are out of stock most places. discontinued? I would also consider looking at second hand especially if you are looking to mod as warranty isn't a consideration.
Supporters Rogerborg Posted February 22, 2022 Supporters Posted February 22, 2022 7 hours ago, mirinjawbro said: seems they are out of stock most places. discontinued? The usual suspect "BB" sites have a few, although sadly 2-toned. CYMA CM.5xx M4s are cheap, robust and ripe for tinkering, if you don't mind the cheap ToyTown plastic body.
Lowe Posted March 11, 2022 Posted March 11, 2022 Some form of P90. I picked up a Cybergun version for about 140 quid. The beauty is that the gearbox is only held in with two screws in the butt stock. So you're not wasting time getting the gun in bits, it's literally seconds to get the gearbox free.
mirinjawbro Posted March 14, 2022 Author Posted March 14, 2022 i have always liked P90s. helps me get closer to the 1.6 weapons how reliable are they? i may add some silly springs / motors etc to play around
Lowe Posted March 30, 2022 Posted March 30, 2022 On 14/03/2022 at 20:44, mirinjawbro said: i have always liked P90s. helps me get closer to the 1.6 weapons how reliable are they? i may add some silly springs / motors etc to play around Err, as reliable as anything else. I've blown mine up numerous times but purely because I've done what you plan to do haha! Out the box they're fine, with basic tinkering still fine. Only issue is the triggers being a bit crap (standard bullpup) but that can be worked around.
Guest KiloGr Posted March 30, 2022 Posted March 30, 2022 most things cyma tbh, specna are ok, G&G also good
mirinjawbro Posted March 30, 2022 Author Posted March 30, 2022 as my other thread, i do have a G&G MP5 SD5 EBB i could / would like to mess around with. just worried ill blow it up.
Supporters Rogerborg Posted March 30, 2022 Supporters Posted March 30, 2022 41 minutes ago, mirinjawbro said: as my other thread, i do have a G&G MP5 SD5 EBB i could / would like to mess around with. just worried ill blow it up. Kind of the point. Optimise it until it breaks, back it off a quarter-turn, then leave it for the apprentice to find sell it on as "Mint condition, barely used, worked perfectly until it didn't'".
mirinjawbro Posted March 31, 2022 Author Posted March 31, 2022 great idea !!. then itll end up on negative airsoft. Rogerborg 1
Recommended Posts