2MT Paul Posted May 28, 2022 Posted May 28, 2022 Hi all I'm in the process of having my Bolt B4 A1 Elite SD rear wired, however there is very little space in the original stock for the battery. Does anyone have suggestions for a replacement stock that will fit with the space I need. Many thanks Paul
Daveoc33 Posted May 29, 2022 Posted May 29, 2022 (edited) The pts enhanced polymer stock has reasonable space. There's also the vfc qrs. If you want something slimmer you can get a magpul ctr / MOE with an enhanced (bigger) butt pad and bore out the butt pad. Davescustomairsoft do these ready made or there's and airsoft artisan 3d printed butt pad that does the same thing. Lots more choices too depending on what you like the look of. Nearlty forgot the bcm gunfighter mod 1 also looks like it has some decent space (made by vfc). Edited May 29, 2022 by Daveoc33 Typo 2MT Paul 1
concretesnail Posted May 29, 2022 Posted May 29, 2022 Second the pts eps. I have on my 308 and it's big enough to get two batteries in there, a nuprol 3s 1450 25c crane and a tattu 3s 1050 85c. 2MT Paul 1
2MT Paul Posted May 29, 2022 Author Posted May 29, 2022 Cheers all, much appreciated. My main concern was the fitting over Bolt Recoil system tube, Is it a universal size??
Daveoc33 Posted May 29, 2022 Posted May 29, 2022 I'd be surprised any of these didn't fit but you're probably best off measuring. This thread goes on about stocks and buffer tubes: https://arniesairsoft.co.uk/forums/index.php?/topic/177260-milspec-vs-commercial-spec-ar-buffer-tubes/#:~:text=The Mil-Spec buffer tube,tube is 1.168" in diameter.&text=AEGs - Most AEGs are based,many more (most actually). 2MT Paul 1
Recommended Posts