Killaway Posted June 29, 2022 Posted June 29, 2022 Hi, new to airsoft and picked up an L85A2. I've got the adapter block I'll need for the Defence Rail, however, because I bought the rail second hand there is no screw with it. The ICS Defence rail seems impossible to get hold of, so just wondering if I was to buy a new Defence rail (G&G variant) would this come with the screw I'll need to fit it to my ICS rifle? Really hope so because I've bought one lol. Had a nightmare trying to find a screw for the rail (which is literally all I need is the screw to go into the bottom of the adapter block) Any help would be much appreciated Scott
Enid_Puceflange Posted June 30, 2022 Posted June 30, 2022 (edited) Dunno, Id be calling the retailers and asking them to open the package for me to confirm before I ordered it. Edited June 30, 2022 by Enid_Puceflange
JimFromHorsham Posted June 30, 2022 Posted June 30, 2022 Can you not just measure what “screw” you need ?
Killaway Posted June 30, 2022 Author Posted June 30, 2022 I asked the retailers but they just said it comes with numerous fittings lol it's also coming from Canada because I couldn't find anywhere over here (UK) with one in stock. Probably be the cheaper and quicker option Jim yea, I'm gunna go to screwfix at weekend and see if they can sort me with one. But now I have another rail on the way anyway lol
JimFromHorsham Posted June 30, 2022 Posted June 30, 2022 4 minutes ago, Killaway said: I asked the retailers but they just said it comes with numerous fittings lol it's also coming from Canada because I couldn't find anywhere over here (UK) with one in stock. Probably be the cheaper and quicker option Jim yea, I'm gunna go to screwfix at weekend and see if they can sort me with one. But now I have another rail on the way anyway lol any pictures of where it needs to go ? An approximate diameter of the hole and length of screw / bolt and I’ll see if I’ve got anything that may help you out .
Killaway Posted June 30, 2022 Author Posted June 30, 2022 5 minutes ago, JimFromHorsham said: any pictures of where it needs to go ? An approximate diameter of the hole and length of screw / bolt and I’ll see if I’ve got anything that may help you out . Thanks mate. Soon as I'm home I'll send a picture over. JimFromHorsham 1
Killaway Posted June 30, 2022 Author Posted June 30, 2022 So, that's the rail and block and I would say screw needs to be about 5/6mm diameter and about 2.5/2.6cm in length.
JimFromHorsham Posted June 30, 2022 Posted June 30, 2022 So an M5 or M6 bolt at 25mm would be the first choice to try imo . im happy to have a rummage later and if I’ve got anything suitable I’ll pop them in the post for you if you like ?
Killaway Posted June 30, 2022 Author Posted June 30, 2022 4 minutes ago, JimFromHorsham said: So an M5 or M6 bolt at 25mm would be the first choice to try imo . im happy to have a rummage later and if I’ve got anything suitable I’ll pop them in the post for you if you like ? yea that would be greatly appreciated if you would! Just drop me a pm for details etc whenever you're ready. Thanks so much!
JimFromHorsham Posted June 30, 2022 Posted June 30, 2022 1 minute ago, Killaway said: yea that would be greatly appreciated if you would! Just drop me a pm for details etc whenever you're ready. Thanks so much! ill have a look in about an hour for you Killaway 1
JimFromHorsham Posted June 30, 2022 Posted June 30, 2022 (edited) 1 hour ago, Killaway said: yea that would be greatly appreciated if you would! Just drop me a pm for details etc whenever you're ready. Thanks so much! had a quick rummage , I’ve only got up to M5 here and only up the 20mm thread length , I’d happily stick a couple in the post for you but looking at your pics I think too short if you want it to go all the way through the block ? Edited June 30, 2022 by JimFromHorsham
Dan Robinson Posted June 30, 2022 Posted June 30, 2022 Carbon Steel Hex Socket Cap Screws, 723pcs Hex Head Bolt Nuts and Washers Assortment Kit with Wrench, M3 M4 M5 Replacement Bolt Nuts Set https://amzn.eu/d/jkSp2WR Killaway 1
Killaway Posted June 30, 2022 Author Posted June 30, 2022 (edited) 35 minutes ago, Dan Robinson said: Carbon Steel Hex Socket Cap Screws, 723pcs Hex Head Bolt Nuts and Washers Assortment Kit with Wrench, M3 M4 M5 Replacement Bolt Nuts Set https://amzn.eu/d/jkSp2WR Looks like they only go upto 20mm too though and I'm thinking it will be too short? Edited June 30, 2022 by Killaway
Dan Robinson Posted June 30, 2022 Posted June 30, 2022 There is 20 x 30mm m5 bad boys in there ? Easy enough to trim them down to your 25mm. Killaway 1
Killaway Posted July 8, 2022 Author Posted July 8, 2022 Finally got it sorted! Got an M6 from screwfix and just needed to grind it down a bit, clean it up and it went straight in perfectly. Happy now that's finally sorted! Thanks for the help
Recommended Posts