Chai. Posted July 17, 2022 Posted July 17, 2022 Looking to do some upgrades to the JW3. Not looking for short stroke upgrades but more accuracy upgrades, what can I do? Also my bbs are shooting to the left when I shoot. I adjusted the hop up but it did not make a difference.
Alimcd Posted July 17, 2022 Posted July 17, 2022 Clean the barrel and hop rubber, see if the issue has gone away. if it persists, check how the hop rubber is sitting on the barrel and that it’s central. You should be able to see if the contact patch is in the centre of the barrel’s rebate. If that was central and everything is clean, it’s likely the hop arm is slightly deformed and putting more pressure on the near side of the bb than the far side. This can be remedied by bending it back into shape to give equal pressure on both sides of the bb. Enid_Puceflange and Nick G 2
Chai. Posted July 17, 2022 Author Posted July 17, 2022 2 hours ago, Alimcd said: Clean the barrel and hop rubber, see if the issue has gone away. if it persists, check how the hop rubber is sitting on the barrel and that it’s central. You should be able to see if the contact patch is in the centre of the barrel’s rebate. If that was central and everything is clean, it’s likely the hop arm is slightly deformed and putting more pressure on the near side of the bb than the far side. This can be remedied by bending it back into shape to give equal pressure on both sides of the bb. Any recommendations on what products to use to clean the barrel/rubber? Is IPA 99% safe to use?
Chai. Posted July 18, 2022 Author Posted July 18, 2022 On 17/07/2022 at 18:39, Alimcd said: Clean the barrel and hop rubber, see if the issue has gone away. if it persists, check how the hop rubber is sitting on the barrel and that it’s central. You should be able to see if the contact patch is in the centre of the barrel’s rebate. If that was central and everything is clean, it’s likely the hop arm is slightly deformed and putting more pressure on the near side of the bb than the far side. This can be remedied by bending it back into shape to give equal pressure on both sides of the bb. Just cleaned everything today and hop up arm was did not look deformed. Any other solutions?
Recommended Posts