BIGwat Posted August 28, 2022 Posted August 28, 2022 Hi all, I have currently started a hawsan double barrel project, it is the full length version. I have ordered the conversion kit from blobworks to have this use aps shells, I know it can only use aps mk1 and mk3 smart shells but my real question is does anyone have any experience with the xpower shells? They seem to be much easier to get hold of but I'm unsure due to the power increase in fps, are these still field legal? Thanks BIG
Enid_Puceflange Posted August 28, 2022 Posted August 28, 2022 (edited) Hi Big Your right, the X Powers do have a bit of punch to them It depends on how you fill them too Obvs they use co2, I fill mine with using an 88gr bulb If you fill with the bulb from above the cart, you will fill with liquid co2 which has more power than filling it with the cart above the bulb which will fill with gas co2 Also a thing to realise is how you stack the hull with beebs Ive tried the petal style wads and using just cardboard top and bottom of the hull with beebs sandwiched in between If you used gas co2 and cardboard wads (which shred when the gas expels) along with .2’s you would get quite a low power punch Dicking about with mine , filled with liquid co2 and using petal wads and .28’s I can hit up to 40m Hard to get an accurate Chrono reading with these shells though because of how they require to be loaded Edited August 28, 2022 by Enid_Puceflange BIGwat 1
BIGwat Posted August 28, 2022 Author Posted August 28, 2022 Thankyou so much Enid, im a complete noob with the aps shells and this was super helpful! Very much appreciated, many thanks.
Enid_Puceflange Posted August 29, 2022 Posted August 29, 2022 18 hours ago, BIGwat said: Thankyou so much Enid, im a complete noob with the aps shells and this was super helpful! Very much appreciated, many thanks. No dramas bud Also on YouTube, Catgut Violin and S.W.A.P - Special Weapons And Plastic have good videos on different ways to fill the hulls Which is where I got the inspiration for my video above ?
BIGwat Posted August 29, 2022 Author Posted August 29, 2022 I'll definitely check both of those out, I want as learn as possible, I know in your video you mentioned the cardboard tops for the hull are 18mm. I'm struggling to find any hole punch's that are 18mm, but there are a few that are 19mm would that still be adequate for the job? with it only being a small fraction larger
Enid_Puceflange Posted August 29, 2022 Posted August 29, 2022 Yeah, a 19mm will fit snugly If you are using card, try and source one of the 3D printed loading tools that Catgut uses (I may have a spare in one of my boxes) Amazon sells 3/4” paper punches which I believe are pretty much the right size or what the stateside users use to make wads Fortunately, my wife is a little bit “crafty” and has a CriCut machine which is what I use when she’s not looking Cardboard from cornflakes packaging is perfect Who doesn’t like Weetabix with a banana chopped and a drop of clear honey drizzled over ??
BIGwat Posted August 29, 2022 Author Posted August 29, 2022 That's brill, yeah the ones I was looking at were 3/4 punch's with 19mm in brackets just thought I'd check before I buy. Nothing better than firing banana weetabix at other players making sure everyone gets there daily intake of potassium ?. had me howling when you mentioned about Tony the tiger flying towards someone ? yeah I saw on the video of the cricut, the only time in my life I've wanted to get one for myself aha
Enid_Puceflange Posted August 29, 2022 Posted August 29, 2022 Aww, don’t start me off im trying to convince my mrs that she needs a laser engraver next ??
Recommended Posts