Skullchewer Posted November 3, 2022 Posted November 3, 2022 (edited) HPA NEWBIE! So, I have a Golden Eagle m870 sawn off. I've seen that you can simply change out the fill valve for an hpa valve and you're mostly there. I've bought a Balystik HPA tap for golden eagle shotguns. So my questions are: Is there anything else I need to do to the internals to prep it for HPA? What tank/regulator/line should I get? I already have this tank for filling my tag shells, would this work? https://www.bztactical.co.uk/valken-13cu-3k-air-system Edited November 3, 2022 by Skullchewer Typo
Skullchewer Posted November 3, 2022 Author Posted November 3, 2022 Well, after a bunch of research I ordered a Balystik HPR800C V2 Regulator, Balystik Deluxe Line and a Valken V2.0 48ci 3K tank. I think that'll all work together. ?? Tactical Pith Helmet 1
sjhirst Posted November 4, 2022 Posted November 4, 2022 yep, cant go wrong with that set up! Just be aware, that depending on what shotgun you have, you might need to drill a wider hole for the hpa tap to go in. Skullchewer 1
Skullchewer Posted November 4, 2022 Author Posted November 4, 2022 1 hour ago, sjhirst said: yep, cant go wrong with that set up! Just be aware, that depending on what shotgun you have, you might need to drill a wider hole for the hpa tap to go in. Yup, I did read that. I've not tried the tap yet, but I'm hoping as it's designed for golden eagle it should be a drop in modification. Yup, easy as. Going to take it back out, have a clean up and add some PTFE. sjhirst 1
Recommended Posts