Johndaniel4863 Posted February 25, 2023 Posted February 25, 2023 Does anyone know who makes a compatible wood or polymer stock that I can be mounted onto a JG RPK74? Mine has decided to crack slightly around the metal tang where it bolts onto the rifle which i am going to try and fill with super glue and clamp together but am thinking of my plans if the gluing plan fails....
Sniper780 Posted February 25, 2023 Posted February 25, 2023 You could try the lct rpk wood stock set, it just depends if your metal fitting are the same as an lct rpk.
Johndaniel4863 Posted February 25, 2023 Author Posted February 25, 2023 I have reattached it but all i have is a tab at the top for the bolt to go in and then at the bottom a small box extension that the wires run through
Sniper780 Posted February 25, 2023 Posted February 25, 2023 I have just measured my lct rpk stock, it looks almost the exact same as tang fitment set up as yours The dimensions for the square opening are width: 20.88mm and height:15.43mm. The lct rpk rear stock it made of laminated wood so it is modifiable.
Johndaniel4863 Posted February 25, 2023 Author Posted February 25, 2023 Cheers mate! I have managed to glue the cracks and used a clamp to keep pressure on the stock while it dried (my missus bought some superglue that was like water so it soaked into the wood perfectly)but i am still going to find a new stock and handguard set...as i imagine it will fail at some point! Although it fits alot tighter now which i am happy with as it had slight left and right movement!! Sniper780 1
Recommended Posts