Jp-92 Posted May 26, 2023 Posted May 26, 2023 (edited) I have a custom glock 19 which only shoots around 240fps on .25s could I use black gas in it to get more fps or would I damage anything and is there anything else I can do to get higher fps ? Would Nineball high flow mag valves help ? Parts list of my glock below… thanks for any help! guarder complete lower guarder aluminium slide guarder inner barrel/hop unit kit maple leaf bucking Nineball laylax Neo fixed outer barrel Nineball laylax gas routers in mags Nineball laylax dyna piston cow cow blowback housing cow cow nozzle cow cow recoil spring Edited May 26, 2023 by Jp-92
Krisz Posted May 26, 2023 Posted May 26, 2023 (edited) What's your fps on 0.20? I think Marui G19 (either gen. 3 or 4) is notorious about being a low FPS gun even on green gas (as stock) but I've only watched videos about this gun on YT. Never had one actually for the same reason. A heavier alu slide isn't gonna help either when you have fps issues already. You could swap your inner barrel for a longer one (within reason let's say 106mm instead of an 87mm). I've gained about +20 fps because of it on my G26 but ofc you have to hide it with a tracer or dummy supressor. Black gas is gonna put more strain on your internals so use it at your own risk. Nineball high flow mag valve is a big question mark to be honest. Edited May 26, 2023 by Krisz Jp-92 1
Jp-92 Posted May 26, 2023 Author Posted May 26, 2023 (edited) 2 hours ago, Krisz said: What's your fps on 0.20? I think Marui G19 (either gen. 3 or 4) is notorious about being a low FPS gun even on green gas (as stock) but I've only watched videos about this gun on YT. Never had one actually for the same reason. A heavier alu slide isn't gonna help either when you have fps issues already. You could swap your inner barrel for a longer one (within reason let's say 106mm instead of an 87mm). I've gained about +20 fps because of it on my G26 but ofc you have to hide it with a tracer or dummy supressor. Black gas is gonna put more strain on your internals so use it at your own risk. Nineball high flow mag valve is a big question mark to be honest. It’s about 265 I think on .2s, Thanks for your reply mate! Edited May 26, 2023 by Jp-92
Enid_Puceflange Posted May 27, 2023 Posted May 27, 2023 I doubt a heavier slide would affect your fps, your recoil speed maybe…. but I maybe wrong?
Krisz Posted May 27, 2023 Posted May 27, 2023 (edited) 10 hours ago, Jp-92 said: It’s about 265 I think on .2s, Thanks for your reply mate! Hm that's very low indeed. Is 265 on green gas? There is only so much you can do about a good air seal on a gbb and you did it already. You could try a 6.01 tight inner barrel as well. I had fitment issues with my dyna piston head on my G26 so you could try to swap it back to the original one if you've still got it. Personally I would use the original marui plastic slide and a longer inner barrel for now if you're dead set on getting a bit more out of it. Edited May 27, 2023 by Krisz
Alpha.s1 Posted May 27, 2023 Posted May 27, 2023 265 on a marui pistol probably isnt far off the usual mark, how does the pistol shoot as is now, range accuracy wise ? You can go up a gas, or use propane if you want, probably wont make anything explode
theSwede Posted May 27, 2023 Posted May 27, 2023 (edited) I suppose you’re using gg now? In that case which one? You could try using a more powerful kind of gg. I use ultrair 140 psi with good results. You could also try putting a thin shim ”above” the bbu to improve the gas seal. Sometimes it works a charm and sometimes everything turns crap. But the first thing I would do is to reinstall the original TM bbu and hopup and chrono it. Take it from there. Edited May 27, 2023 by theSwede
Schnitz Posted May 27, 2023 Posted May 27, 2023 That's about right for a marui g19 tbh, my TM G17 does about 265 on .25s but that's only because it has a longer barrel than the g19. You could fit a longer inner barrel and it conceal it with a tracer or even just the thread adapter that comes with the laylax outer barrel you have
Cr0-Magnon Posted May 29, 2023 Posted May 29, 2023 As above, 265fps on a 0.20g is spot on for a TM G19 which only has an 84mm inner barrel and there aren't really any upgrades to get it much above that. The TM V10 Ultra Compact is only 230 - 240fps on a 0.20g. Do you really need more though?
navyvet86 Posted June 4, 2023 Posted June 4, 2023 Owner of multiple Glock 19s here. WE magazines as TM magazines done have high flow valves installed. If you want to keep the magazines you have it's easy to remove the valves and file the hole a little larger also. Add a longer barrel, even using a tight silencer increases FPS as there's a longer space for the gas to expand/push through. Tightbore barrel 140% hammer spring
Recommended Posts