nutty Posted July 2, 2023 Posted July 2, 2023 I have a TM VSR10-G spec with Upgrades installed EdGi 430mm bull barrel. Laylax barrel spacers. 90� zero pull trigger. Laylax piston. Laylax cylinder and cylinder head. Laylax spring guide. Action army hop up unit. Maple leaf 60� autobot bucking. Maple leaf omega nub. I baught this 2nd hand 4 years ago used it 3 times then stopped playing, I have recintly decided to get back into airsoft as I have free time again and I installed a new Action Army Vsr-10 M150 Spring but im only getting 260 fps so I thourght somthing may be broke. I took it all apart re-lubes it all with silocone spray. when I got to my buckshot it looked ok no visable tears but old. here are photos anyone got any suggestions on what I need to do?
concretesnail Posted July 2, 2023 Posted July 2, 2023 M150 and only 260 fps, I'd be going straight to the air seal parts. Start with a flash rubber in the hopup and new orings they feel lubed but if they have lost a little mass then you'll be loosing the seal.
nutty Posted July 2, 2023 Author Posted July 2, 2023 What flash rubber/ oring sizer would you suggest?
concretesnail Posted July 2, 2023 Posted July 2, 2023 I'd look to maple leaf rubber and you can either by a box of orings to try sizes or search for a vsr10 piston oring , it's usually about 18mm unless the laylax change the cylinder inner diameter.
Recommended Posts