shane f Posted July 17, 2023 Posted July 17, 2023 Hi guy new here but not that new to airsoft. I just baught a cyma cm041j which is a great gun it came with a 1200mAh 8.4 battery. I'm only used to lipo batts. I have a accucell 6 charger. I set it up for a 1amp charge but the gun fired realy slow then died. Can you tell me how to set my charger please i dont want to use the charger that came with my rif. Thanks in advance
shane f Posted July 17, 2023 Author Posted July 17, 2023 Thanks for your help mate but thats what i did. After 2 hi cap mags testing a new gun it just died which tells me the battery that came with the gun has been sat on the shelf for way too long. I have a new 7.4v lipo and the gun performed amazimg which tells me the NI-MH is dead. I just asked the question incase i was doing so ething wrong. Thanks for your help gavinkempsell 1
Supporters Lozart Posted July 18, 2023 Supporters Posted July 18, 2023 17 hours ago, shane f said: Thanks for your help mate but thats what i did. After 2 hi cap mags testing a new gun it just died which tells me the battery that came with the gun has been sat on the shelf for way too long. I have a new 7.4v lipo and the gun performed amazimg which tells me the NI-MH is dead. I just asked the question incase i was doing so ething wrong. Thanks for your help The factory supplied NiMh that comes with Cyma guns is dogshit. Just bin it and use your LiPos. EDcase, Leo Greer and Cannonfodder 3
Recommended Posts