Jump to content
You are on the old AF-UK. This page will only exist for a few weeks before being deleted. ×

Compatible SR25 VFC (GBB) pistol grips

davidf

By davidf
in Guns, Gear & Loadouts

 Share
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

davidf Experienced

davidf

Posted
Posted

Anyone know which pistol grips are compatible with the SR25 VFC (GBB) platform? 

I did test a spare MOE+ grip but its shaping was way off. 

Looking for something that is just more comfortable that the stock grip it has. 

 

Thanks all

  • Supporters
Lozart Grand Master

Lozart

Posted
  • Supporters
Posted

I'd say Ergo grips because I just like them. Search for AR 308 grips and you should get the righ kind of profile. https://www.brownells.co.uk/epages/UK.sf/en_GB/?ViewAction=ViewFaceted&ObjectID=14584&FacetValue_PreDefString_en_2390542=AR+.308&CurrencyID=GBP

  • Supporters
Lozart Grand Master

Lozart

Posted
  • Supporters
Posted

I see no reason why not. I assumed you were having a problem with the beavertail not fitting the curve at the back of the receiver. If you use a grip without a beavertail then it should be a non issue.

davidf Experienced

davidf

Posted
  • Author
Posted
10 minutes ago, Lozart said:

I see no reason why not. I assumed you were having a problem with the beavertail not fitting the curve at the back of the receiver. If you use a grip without a beavertail then it should be a non issue.

 

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 

  • Supporters
Lozart Grand Master

Lozart

Posted
  • Supporters
Posted
6 minutes ago, davidf said:

 

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 

 

I believe the AR308 version with the beavertail should fit (YMMV of course, airsoft tolerances being what they are).

Shaydee Collaborator

Shaydee

Posted
Posted (edited)
19 hours ago, davidf said:

 

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 


Any real steel grip you buy will have a hole for the selector spring, VFC grips don't have the hole. You'll need to either plug the hole in the grip or use a real steel spring/detent. You can also use wolverine MTW detent kit as they're properly sized up, though if you are buying from brownells you should be able to get a spring and detent from there.

 

Just to add, if you do use an MTW/real spring and detent the selector will feel a lot more crisp.

Edited by Shaydee
 Share
Go to topic listing
×
×
  • Create New...