TheGMan Posted February 9 Posted February 9 (edited) Hi, Not sure how to really describe it. Been working fine then all of a sudden trigger was inconsistent. Removed grips to take a closer look and it's as if it's become loose. It works fine if I maintain some upwards pressure on it. Has a bit gone missing or is it something obvious? https://i.imgur.com/OoBv7mA.png Edited February 9 by TheGMan
strykerles Posted February 9 Posted February 9 (edited) there's a spring missing that holds the bar up part 71 on the lower left quadrant this is a genuine WE replacement part https://www.kyairsoft.com/m9-71-semi-gen-1-gbbp.html and here is a HFC one, should work but i could be wrong https://www.justbbguns.co.uk/hfc-m9-trigger-bar-spring-for-airsoft-pistol-m42-g190-16/ Edited February 9 by strykerles
TheGMan Posted February 9 Author Posted February 9 Thanks. Did have a look, seems to be a brass tack missing as well that would have held it in. I'll try the HFC one. Thanks,
TheGMan Posted February 12 Author Posted February 12 Seems to fit. Need something to secure it though it seems. A regular brass pin is too big. Any ideas?
strykerles Posted February 15 Posted February 15 the advice I was given before was to put a little dab of superglue on the bottom part and the grip should hold it in place when put back on
Recommended Posts