shatis Posted October 16 Posted October 16 (edited) What psi should i be running a VFC M249 LMG at? I have mine HPA tapped. it currently shoots .25s at 300fps on 110psi Edited October 16 by shatis
Lyndication Posted October 16 Posted October 16 You can adjust the power by modifying the valve. Really recommend the Explosive Enterprises video on the VFC M249, (and the follow up video). Tonnes of really solid advice including getting it set up on HPA. shatis 1
Cannonfodder Posted October 17 Posted October 17 (edited) 8 hours ago, shatis said: it currently shoots .25s at 300fps on 110psi Tbh I'd leave it alone as that equals 1.05j. You won't need to up the muzzle energy much before it becomes too hot for 99% of sites and that small increase will do bugger all to increase performance. If you need more range then you're better off upgrading your hop up or use heavier bbs (note joule creep from heavier ammo might make the gun hot so you'd possibly need to dial the psi down) Edited October 17 by Cannonfodder Galvatron, Lozart, shatis and 1 other 3 1
Lyndication Posted October 17 Posted October 17 It's a GBBR, you can just use an NPAS to set the power output independent of the PSI. It's handy because you might want a higher PSI for better cycling, without making it run too hot. Galvatron and shatis 1 1
Recommended Posts