MZKaleem Posted October 9, 2011 Posted October 9, 2011 Hey guys, I have a TM P226 that i bought 2nd hand with a guarder metal kit on it, now i am thinking i need to put the plastic parts back on, what do you guys think? I fired it yesterday (lowest of say, 3 degrees!) and it would fire as if i only had a little bit of gas left, shall i put my plastic kit on? cheers -Zak
Supporters M_P Posted October 9, 2011 Supporters Posted October 9, 2011 I Would, metal just makes the performance slightly worse. the tm 226 is known to be a great pistol. Doesn't need any parts changing
MZKaleem Posted October 9, 2011 Author Posted October 9, 2011 should i put the stock springs on...hang on, i'll check what the guy upgraded. EDIT Proud enhanced recoil spring guarder enhanced piston lid proud enhanced hammer spring
joss1 Posted October 15, 2011 Posted October 15, 2011 Heavy recoil springs and a metal slide are usually (gas efficiency wise) a very bad combination. Personally, I would keep the frame, but replace the slide with a plastic one, or switch the guarder recoil spring for a stock TM spring. Good luck.
MZKaleem Posted October 15, 2011 Author Posted October 15, 2011 cheers, i'll stick the TM recoil spring on and the plastic slide too one day
Recommended Posts
Archived
This topic is now archived and is closed to further replies.