Leaderboard

You're a vegetable

A well timed charge will usually see you get taken out but not until you take out a few enemy and cause enough consternation to let your team make some ground. For a masterclass in aggressive play watch some of the Northern Alliance game day headcam videos eg

essentially, it's not a poor man's chrono it's a feed of bullshit. you wanna know how hot your gun is shooting? chrono it.

Red lasers wont be a beam, just a dot. Unless you are in smoke, fog etc. Green lasers are usually produce a visible beam however are usually more than 5mW. UK legal ones are maximum at 5mW. You technically can import more powerful ones legally, however most reputable sites will not allow anything more powerful than 5mW. Go for a 5mW, they're not really that powerful but you can use them at most sites. Range wise you will get about 30m before the dot becomes quite faint during the daytime outside. Indoors you generally dont need to worry.

There are a lot of very complex game mechanics you have to really know, understand and work on to get good at the game. There's a gigantic Battlefield YouTube community, and instead of it just being full of crazy montages, a lot of it is actually talking about how to make use of the game mechanics. They teach you how to play the game properly. Also, don't call it camping, call it defending, because that's what it is. If you're good enough at the game then someone camping in a corner for the whole game will last maybe 2 minutes tops, because as soon as they kill a person, that person knows where they are, and unless they're using a suppressor they're going to appear on the map and if they appear on the map, everyone's going to know they're there and then they lose their surprise advantage when someone rounds the corner on them. It gains them nothing unless it's an area with a clear view of an M-Com in Rush, or if they're within the cap radius of a Conquest point. ...Or they're an ass hole. Team work tends to come in the form of being given health and ammo by Assault and Support players, more so than moving around in a squad and sticking together. Engineers can repair vehicles and Recons can "spot" people... Like everyone else. If you play on Hardcore mode (go into the server options and filter for it) then everyone's health gets reduced to 60% as maximum, so guns tend to kill a lot faster, health doesn't regenerate and there's also no mini-map, so you have to rely on sight and sound alone, instead of the mini-map, which I passionately detest, it's like a built in 3D wall hack.

Okay okay, you want a high speed scar? I'm your guy I recently turned my scar into a HS setup and now it fires 40rps @ 340fps Parts you will need: m100 Spring Steel teeth piston SHS ultra high torque motor SHS/Super Shooter 13:1 Gear set Shims, Lots of them teflon grease better gearbox wiring Mosfet (this is a must) 6.03mm 363mm Madbull barrel (optional) And a 9.9V LiFePO4 battery (I recommend staying away from 11v lipo's) Work required: Hours and hours worth of shimming & greasing the new gears. (this is the most important part of the entire set up, its a pain in the ass but if there is one wrong shimmed gear it will slow it down dramatically) Greasing basically any moving part in the gun. Swiss cheesing the piston slightly. (don't got ott with this i hardly did any) Making sure the contact between the motor pinion gear and bevel gear is aligned perfectly, you cant afford to tighten you pistol grip too much/little. Correcting angle of engagement. Polishing cylinder head. (optional, but i personally think its worth it) Hair Trigger All the tutorials and tips to do all of the above processes can be found at http://airsofttutorials.com/tutorials.html By installing all the listed parts and doing the required work you will have a very high speed gun and instant trigger response.

When you are talking about over a hundred quids worth of gun my advise would be wait and save than attempting to do things on the cheap.

I don't like unrealistically high rof either, but if you want your gun to be snappy and responsive on semi-auto as well then you're going to end up with it shooting over 20 rounds a second for it to not feel sluggish. That's what I love about gas guns, instant trigger response without the rof needing to be moronically high on full auto. As for this SCAR in question though, I'm betting there's all sorts of air seal issues for it to be shooting at 190, there's no way in hell anyone would downgrade something that low, there's no call for it whatsoever. I'd check the hop, the piston and the cylinder head, it's possible all the seals are shagged, there could potentially by piston wear too, making it release early. Or perhaps the cylinder is ported and it was put in backwards...

In these situations I/we (my buddies are of a similar mindset) tend to go for the "lead by example" approach of using the age old battle cry "Oh FFS, get out of the way" and charging headlong into the foe. Sometimes it breaks the stalemate, sometimes it just serves as amusement but either way - it's not me standing in the midst of a gagglefuck anymore!

Ughh, I hate people shouting at me, telling me to do stupid things, unless they are warning me about a flanking enemy or something that poses a threat. But if I'm right next to them they don't have to shout like I'm on the other side of the pacific ocean.

"Don't be afraid to take charge" but don't be a dick about it. Not everyone likes a chairborne general shouting "MOVE THE FUCK UP!!!" in their ear at every door way or choke point.

That's a vegetable Mike.

Keep calm.... The more relaxed your mind is, you will benefit from: Improved decision making and awareness Improved stamina (red mist zaps energy like you wouldn't believe) Improved understanding and communication But most of all keeping calm makes you look like one hell of a badass! Imagine a situation where you walk round a corner suspecting there are multiple targets. You go into a panicked hysteria and attempt to spray the entire room whilst looking away behind you because you are scared of getting hit in the face. Alternatively (and you can even use a pistol for this as apposed to an aeg) you can step out quickly but calmly. Your brain will automatically process the targets so acquisition is easier and faster. You get 4 targets in 4 rounds and the guys you hit were left looking panicked themselves! They walk away beliving you are a cyborg lol. This is made twice as badass if you use a revolver and you enter the realms of true badass motherfuckery if you do this with a knife! I have with my own eyes seen a friend literally walk through 12 guys with aegs whilst he took them all out with dual pistols. Casual but extremely effective and utterly badass

"Rule #1 - Cardio"

Ok, so my Ares M4 suffered terminal gearbox failure. Even though it hasn't been used a lot in its 4 years, the monkey metal used in the original shell has disintegrated around the cylinder head. I emailed Ares for prices for a new shell, came back as 73USD posted, plus customs and admin fees when it arrived no doubt. As I wanted to keep the repair as cheap as possible, coupled with my doubts the new Ares shell would survive any longer than the original, made me seek an alternative. The options available were: 1) to buy a standard V2 shell and swap the Ares internals into it; problem here being the Ares trigger / microswitch won't fit into a standard shell designed for standard switch parts, also the spring guide is different as the Ares box has a QD spring guide; 2) buy a complete V2 gearbox such as the ZCI or Specna Arms ones which can be had for around £50; However Forum member ak2m4 suggested a third option; a ZCI shell which is essentially a clone of the Ares shell design, and comes with trigger, microswitch and wiring, plus spring guide. Costing £30 this seemed the best value option so one was ordered from his website with a couple of other bits. Great value and great service too! The shell is a budget one but seems pretty well cast in fairness. The original Ares 8mm bearings and bushings dropped in fine, I had to remove a couple of the Ares shims to get the gears turning freely in the new shell. Whilst apart I fitted a new "Core" vented bearing piston head (I always fit a bearing piston head or bearing spring guide to my gearboxes to remove spring torque) and fitted the cylinder / cylinder head / piston / tappet plate / air nozzle. No fiddling about with the trigger and switch required, they're already in the new shell and deceptively simple in design, as is the selector plate and safety (which worried me slightly initially). All that was needed was to reroute the wiring as its fitted for a rear set up, but my gun needs a front wired arrangement. After a check everything was in place, and a relube, the gearbox was closed up, the spring and spring guide fitted and tested for free movement and function, as per the pic below. The Ares pistol grip and motor were then fitted and the whole assembly tested electrically, and hey presto, all worked perfectly, safety, single shot and full auto! I was advised by Pete (ak2m4) some minor filing may be needed; I found I did have to file a tiny amount where the hop unit locates in the front of the shell as it wasn't quite "round", and a little casting flash from on top ot the shell where the 2 halves meet, plus open the holes out slightly where the small receiver pin passes through the gearbox above the trigger but nothing else otherwise. Time will tell how it stands up to use but I'm pleased to have fixed my M4 at fairly low cost AND been able to retain the quick release spring feature, and it still fires around the original velocity of 325FPS. I would particularly like to thank (and plug) Forum member Pete (ak2m4) for bringing the ZCI shell to my attention, his website www.ak2m4.co.uk is full of useful parts at reasonable prices.

New to the forum and airsoft in general, I play at bunker 39 in Colchester, just thought I'd say hello ?

I'm sure I've seen an airsoft m4 rail adapter for the Vectors.

if your computer is struggling with BF3 it'll melt itself through the floor with BF4.

I am writing down this so i can give it to my tech lol and thanks this is just what im looking for

Ah OK mate. No problem. Didnt recognise you with your clothes on.

i would love to be able to do it myself but i have never opened a Scar or any AEG i am looking for broken Scar as i have realized there is a few bits missing(Externally) but if anyone is selling broken AEG's i would love to strip them just to take a look

you need to be 18+ for pyro so probably asking for ID

and they cost more. my intention was to just cut up masking tape andwork from spray cans. did a sample area and considering i just sprayed the paint not stensining the first and second coat to get high contrast in those stages it hasnt turned out bad. will post piccys later

Yes.

Print it out on paper the size you want it so you can plan your layout. And get some good scalpel blades cos you're gonna need a few to cut and weed an entire gun! Paint mask vinyl WILL give you a sharper edge but getting it around all the fiddly bits would take some major patience. Finishes like Kryptek actually look better hydrodipped unless you want a colour they don't do.

good idea

There isn't really a definitive line you can cross in order to say you're good at the game; there are a lot of ways to play it. Someone could be a totally mindless retard but have exceptionally good reflexes and just run about like a headless chicken and manage to come out on top (I fucking hate those people). I put over 1400 hours into BF3 by the time BF4 released and due to my play style I still wasn't even at the max rank. I'd say it'll take you a good hundred hours or more to really get to grips with it. I'm still trying to break bad habits even now. When someone catches me unawares I tend to strafe instead of turn to try to get the crosshairs on people, often putting me in a more shit position. Though that's probably easier to do on console than on PC, where you movement and aiming controls are very significantly different. I'm also still teaching myself to cancel reloads by switching weapons and back again. So often I die in a reload when I didn't even really need to go for one. Getting over stuff like that is the hardest part of the game, knowing where you need to be and what you need to do in order to win is easy, and if everything I plan to do, goes to plan, then I can pretty consistently score in the top 3. It's when people aren't where you expect them that fucks you over lol.

You want a laser, 13:1 gears, high torque motor, 29.6v lipo battery, metal piston, metal stuff, more metal stuff, 6.03mm diameter psg1 length barrel, jbbg silicon grease, Guarder sp170 srping and metal BBs for ultimate torture

The laser itself should be fine. Usually though from the "cheaper" ones though is that they sometimes lack a large range of adjustability to zero in the laser to the gun.

Foodgasm

If anyone can find the dxf or vector art for that pattern I can try running it through my vinyl cutter.

This will be a bit of an ongoing project. Picked up a slightly tired TM CQBR recoil. The internals are solid and the recoil is nice and crisp. BUT the externals are a little worn. Bit for it so far are just out of my kit bag and left over form my old VFC SR-16. EOTech 552 KAC fore grip Weapon light in Element mount it came with: Genuine Magpul MBUS rear sight Clone ARMS folding front sight and a mega rare Eagle 6 7.4 3200 lipo. Internals are going to be upgarded once funds permit.

Save up some more.. for an extra £20 you'll get a decent 2nd hand one rather than some junk off jbbg

I think that's their advise as well.. save for AFUK.

You may get a full day out of it but theres a good chance your buggering the battery aswell. AFAIK your not supposed to let lipo cells go under 3.2v.

Use polycarbonate. 2mm thick at least.

You could alternatively use a custom stencil but as far as I know there are no UK based companies making vinyl camouflage pattern stencils. I could ask if a normal vinyls company (making signs / stickers and things) would make one... I might ask the guy selling this if he will ship over here: http://www.ebay.co.uk/itm/Duracoat-Cerakote-Krylon-Machine-cut-stencil-sheet-Kryptek-camo-pattern-/271457960684#shpCntId Kryptek Mandrake (Woodland) I want one of my (future) guns to look a bit like this:

Its quite apparent Qlimax that this is entirely their fault, that they are lying about the sorts of checks they do and hence are not sufficiently defending their membership from scrutiny by the government if appropriate checks are done. You know its funny, we have had a lot of organisations blaming the whistleblower recently, seems to me these guys don't get it, when you get caught doing wrong its usually best to fix the darn problem rather than try and deflect at the whistleblower who exposed you. BAC is in the wrong here, it is not checking players sufficiently and no store should accept or sell to BAC members anymore as its impossible to determine if they really are Airsoft players. Its really that simple, its for them to fix it or disappear.

If a payment was to have been made an accuse could have been made for why someone else made the payment plus they say they check everyone's UKARA status and site before they contact you asking for your UKARA stuff which they obviously don't and haven't done so They also claim to ask for additional I.D such as driving license and credit card NEITHER of which I was asked for on either my own application or the fake one in question. I love how they are just pushing the blame my way and not actually accepting they cocked up BIG TIME either through laziness or for the fact they simply just want your money.

He only has to prove if the police come knocking and they are only gonna come knocking if he has used it in appropriately. Which by that point it wont matter where he got it. The law doesnt state how many times you have to have been to be a skirmisher. Also the vcra law is to do with the sale, importation and manufacture of rifs & ifs not the purchasing. This is why the ukara was set up to protect retailers. It is not illegal to buy a rif with out ukara or such like. Simply being a skirmisher is proof enough. Just difficult to prove. If an offence is commited they have to prove you commited an offence and that you sold it illegally. As sites recordbwho plays there then thst is enough proof. If his friend knows hes been to a skirmish then there is no offence commited as he has bought it for the intended use of skirmishinģ.

So it has been brought to my attention that their are a number of people which believe that I am now a Dishonest member of the airsoft community and UKARA but the steps taken were no different to what an investigative journalist would do. Also a quote has been made to me which I will put to the public and them to make their own minds up. Is it wrong for the police to act as a child on web chats to catch Pedos !!!!!!

On your budget you're probably better off looking in forums like here for second hand gear as pistols start ~£80 before two-toning. The el-cheapoes are bad economy most of the time as they don't last. Places to buy from include (not exclusively) http://www.proairsoftsupplies.co.uk/ http://www.landwarriorairsoft.com/ http://www.airsoftarmoury.co.uk/ .... There's also, in Europe http://www.taiwangun.com/ not sure if you'll have any problems shipping a two-tone from them over.

I wouldn't recommend you buy from any site with 'bb guns' in the name. They are bad, especially JBBG. Don't take them anywhere public, that is a bad idea.

Do Not take one to fields or anywhere public. They are imitation firearms and that would be illegal and potentially dangerous. If you are under 18, it is illegal for you to buy one.

No secret, just eBay. But it was American eBay on a couple of them which I sent to a mate there and he shipped, which works out a lot cheaper for various reasons. Between eBaying and lots of time looking on forum classifieds, combined with the patience necessary to wait for what you're after to pop up, you can save yourself a fortune. Still buy most stuff from retailers but when it comes to the really pricey gear like RS lights, optics, high end jackets etc you're much more likely to see the stuff you want come up for sale second hand, very often never/barely used. It's the expensive stuff that people are more likely to put the time and effort in to selling on because they can then free-up the funds in that item when needed and it's more 'worth' their time as it were writing up the ads and sales thread. If you wear a Large or XL in jackets for example you can deck yourself out thoroughly in Arc'teryx for not much more than 5.11 or even Helikon prices, there's tons of that stuff on the bay.

You could say the big reveal was an anti-Qlimax. I'll get my coat.

Shout at team mates whilst your fat ass sits there doing nothing.

I personally want a PP-2000 of some description. Either as an AEP or gas weapon for CQB